27" LCD TV | TV ACL de 27 po | TV LCD de 27" NS-27LCD
Insignia NS-27LCD 27” LCD TV Contents Safety information . . . . . . . . . . . . . . . . . . . . . . . . .3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Setting up your TV . . . . . . . . . . . . . . . . . . . . . . . . .7 Using your TV . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Programming the remote control . . . . . . . . . . . . .16 Maintaining. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Troubleshooting . . . . . . . . . . . . . . . . . . . .
Insignia NS-27LCD 27” LCD TV Servicing Do not attempt to service your TV yourself because opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Replacement parts When replacement parts are required, make sure that the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part.
Insignia NS-27LCD 27” LCD TV Features Back jacks Front Control Description 1 Power indicator Lights when your TV is turned on. 2 Remote sensor Receives signals from the remote control. Side Remove the jack cover Remove the jack cover Jack 1 2 Control Description CH+/CH– Press to change the channel. In the on-screen menu system, press to select menus and options. VOL+/VOL– Press to increase or decrease the volume. In the on-screen menu system, press to adjust a setting or change a value.
Insignia NS-27LCD 27” LCD TV Jack 15 HEADPHONE 16 AV OUT R AUDIO 17 AV OUT L AUDIO 18 AV OUT VIDEO 19 RS232 control interface Remote control Note This remote control is a universal remote control. If it does not seem to work with your TV, press the TV button. Note For instructions on programming the remote control, see “Programming the remote control” on page 16. 16 17 1 2 Button Description 2 Device buttons TV–Press to select the TV. DVD–Press to select a connected DVD player.
Insignia NS-27LCD 27” LCD TV Button Setting up your TV Description 24 Press to fast-forward on a DVD or CD if a DVD or CD player is connected. 25 Press to skip the next chapter on a DVD or next track on a CD if a DVD or CD player is connected. 26 SLEEP Press to set the sleep timer. For more information, see “Setting the sleep timer” on page 14. 27 CCD Press to turn closed captions on and off. For more information, see “Viewing closed captions” on page 14.
Insignia NS-27LCD 27” LCD TV Connecting speakers Use the following illustration to connect an outside antenna. To connect speakers to your TV: 1 Unplug the TV power cord and all devices connected to your TV. 2 Connect the speakers to the speaker jacks on the back of your TV. Make sure that you connect the black part of the speaker wire to the – jack and the red part of the speaker wire to the + jack on the back of your TV.
Insignia NS-27LCD 27” LCD TV To connect cable TV with a converter/descrambler box: • Use the following illustration to connect a converter/descrambler box. (The RF switch and the signal splitter are not provided.) Set the RF switch to the A position to watch unscrambled channels using your TV remote control. Set the RF switch to the B position to watch scrambled channels using the converter/descrambler controls.
Insignia NS-27LCD 27” LCD TV Connecting a VCR (for recording) Connecting an amplifier Use the following illustration to connect an external amplifier. Warning Make sure that you turn off and unplug your TV before installing devices. Use the following illustration to connect a VCR for recording TV programs.
Insignia NS-27LCD 27” LCD TV Connecting a camcorder Connecting a DVD player Warning Make sure that you turn off and unplug your TV before installing devices. Warning Make sure that you turn off and unplug your TV before installing devices. Use the following illustration to connect a camcorder to your TV. Use the following illustration to connect a DVD player to your TV. To connect a camcorder: 1 Plug the audio/video cable into the AUDIO L, AUDIO R, and VIDEO jacks ont the back of your TV.
Insignia NS-27LCD 27” LCD TV Connecting a DTV receiver Connecting a computer Warning Make sure that you turn off and unplug your TV before installing devices. Use the following illustration to connect a computer to your TV. G=green (Y) W=white (audio left) R=red (audio right, Cr.Pr) B=blue (Cb/Pb) TV Warning Make sure that you turn off and unplug your TV before installing devices.
Insignia NS-27LCD 27” LCD TV 4 Select Air for an outside antenna. Select Cable, Cable HRC, Cable IRC, or Cable Auto for cable TV. We recommend that you select Cable Auto for cable TV. For more information about cable TV selections, contact your cable TV provider. 5 Press the EXIT button to close the on-screen menu system. Setting up the channel list After you select your TV source (antenna or cable), you need to set up the channel list.
Insignia NS-27LCD 27” LCD TV 3 Press the or button one or more times to highlight Channel Labels, then press the OK or button to open the Channel Labels Menu. 4 Press the or button to move the highlight or cursor. Press the or button to toggle between NTSC or ATSC or to select a channel number or character. 5 Press the OK button to return to the previous menu or press the EXIT button to close the menu system. Freezing the picture You can freeze (still) the screen image.
Insignia NS-27LCD 27” LCD TV 4 Press the or button one or more times to highlight Password Change, the press the OK or button to access the Password Change option. 5 Press the number buttons to enter the old password. If you have not set a password, enter 0000. 6 Press the number buttons to enter a new password, then enter the new password again to confirm. Caution Write down your password and save it for future use.
Insignia NS-27LCD 27” LCD TV On-screen menus On-screen menu Video Note: Options may vary in different modes. Audio Note: Options may vary in different modes. 16 On-screen menu Options Picture Mode–Selects the picture mode: User, Nature, Soft, or Bright. You can also press the PICTURE button to select the picture mode. Contrast–Increases the picture level to adjust the white areas of the picture. Decreases the picture level to adjust the black areas of the picture.
Insignia NS-27LCD 27” LCD TV 4 Press and hold the SET button on the remote control until the LED blinks twice, then release the button. 5 Enter the first five-digit code for your device. The LED blinks once as each digit is entered. If the code is correct, the LED blinks twice. Note If the LED does not blink twice, repeat steps 3 through 5 using a different code. 6 Aim the remote at the device, then press the button.The device should turn off.
Insignia NS-27LCD 27” LCD TV Maintaining • Symptom Do not use your TV in areas that are too hot or too cold because the cabinet may warp or the screen may malfunction. • Storage temperatures are 32° to 122°F (0° to 50°C). • Working temperatures are 41° to 104°F (5° to 40°C). • Possible solution Horizontal dotted line • Your TV may be too close to another electrical device, such as a hair dryer or neon light. Turn off the device or move your TV. Remote control does not work • Press the TV button.
Insignia NS-27LCD 27” LCD TV Temperature Storage temperatures are 32° to 122°F (0° to 50°C). Working temperatures are 41° to 104°F (5° to 40°C).
Insignia NS-27LCD 27” LCD TV Philco 20 20035, 20479 Viewsonic 21972 Philips 20035, 20081, 20739, 20618 Wards Pilot 20037 20060, 20035, 20048, 20047,20081, 20240, 20042, 20072 Pioneer 20042, 20067 White Westinghouse 20209, 20072 Polk Audio 20081 XR-1000 20035, 20072 Profitronic 20240 Yamaha 20038 Proscan 20060 Zenith 20039, 20033, 20209, 20479 Protec 20072 ZT Group 21972 Pulsar 20039 Qisheng 20060 Quasar 20035, 20162 Aiwa 20641, 21912 Radix 20037 Akai 20770 Randex
Insignia NS-27LCD 27” LCD TV Memorex 20695 Microsoft 20522 Mintek 20717 Mitsubishi 21521, 20521 Nesa 20717 Cable converter codes Norcent 21003 Onkyo 20503, 20627, 21924, 20792 Oritron 20651, 21980 Panasonic 20490, 21762, 21990 Philips 20503, 20539, 20646, 21914 Pioneer 20525, 20571 Polaroid 21086, 21061 Polk Audio 20539 ABC 00003, 00008, 00014 Americast 00899 Bell & Howell 00014 Bell South 00899 Clearmaster 00883 ClearMax 00883 Coolmax 00883 Daeryung 01877, 00877, 0
Insignia NS-27LCD 27” LCD TV Vision 00883 Vortex View 00883 Zenith 00000, 00525, 00899 Warning This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the owner’s manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
Téléviseur ACL de 27 po Insignia NS-27LCD Téléviseur ACL de 27 po Insignia NS-27LCD Table des matières Informations sur la sécurité . . . . . . . . . . . . . . . . .23 Fonctionnalités . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Installation du téléviseur . . . . . . . . . . . . . . . . . . .28 Fonctionnement du téléviseur . . . . . . . . . . . . . . .32 Programmation de la télécommande . . . . . . . . . .37 Entretien. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Téléviseur ACL de 27 po Insignia NS-27LCD Support Ne pas placer cet appareil sur une table roulante, un pied, un trépied, un support ou une table instables. L’appareil pourrait tomber et provoquer dans sa chute des blessures et subir de graves dommages. N’utiliser qu’avec la table roulante, le pied, le trépied, le support ou la table recommandés par le fabricant ou vendus avec le téléviseur.
Téléviseur ACL de 27 po Insignia NS-27LCD Mise à la terre d’une antenne externe Si cet appareil est connecté à une antenne extérieure ou à un réseau câblé, vérifier que l'antenne ou la connexion au réseau câblé est mis à la terre afin de bénéficier d'une certaine protection contre les sautes de tension et les charges électrostatiques.
Téléviseur ACL de 27 po Insignia NS-27LCD Prises arrière Prise 15 CASQUE D’ÉCOUTE 16 SORTIE AV AUDIO R 17 SORTIE AV AUDIO L 18 SORTIE AV VIDÉO 19 Interface de commande RS232. Télécommande Remarque Cette télécommande est une télécommande universelle. Si elle ne semble pas fonctionner avec le téléviseur, appuyer sur la touche TV. Remarque Pour toute information sur la programmation de la télécommande, voir « Programmation de la télécommande » voir page 37.
Téléviseur ACL de 27 po Insignia NS-27LCD Touche Description 18 — Permet de sélectionner un canal secondaire. Pour des informations complémentaires, voir « Sélection d’un canal secondaire numérique » voir page 33. TV – Permet de choisir le mode TV. DVD – Permet de choisir le mode lecteur de DVD. CBL – Permet de choisir le mode TV câblé ou satellite. AUX – Permet de choisir un périphérique affecté à cette touche. 19 + VOL - Permet de régler le volume.
Téléviseur ACL de 27 po Insignia NS-27LCD 3 Remettre le couvercle en place. Utilisation de la télécommande Pour utiliser la télécommande : • Pointer la télécommande vers le capteur situé sur la face avant du téléviseur. Le schéma ci-après illustre la portée de la télécommande. 60° 16.4 ft. (5 m) 30 0 MTS/SAP 0 30 ZOOM CCD AUDIO SLEEP PICTURE FREEZE Remarques : • La télécommande ne doit pas recevoir de chocs ou être exposée à des liquides.
Téléviseur ACL de 27 po Insignia NS-27LCD Connexion d’une antenne externe Les câbles d’antenne sont de deux types : 75 ohms et 300 ohms. 75Câble de 75 ohms Câble de 300 ohms Si le câble d’antenne utilisé a un connecteur de 75 ohms, le brancher sur la prise coaxiale située au dos de l’appareil.
Téléviseur ACL de 27 po Insignia NS-27LCD Connexion d’un magnétoscope Se référer au schéma ci-après pour la connexion d’un magnétoscope pour l'enregistrement de programmes télévisés. Il est possible de connecter un magnétoscope avec un câble audio/vidéo standard ou un câble S-Vidéo. Le câble S-Vidéo ne fournit pas de son. Si un câble S-Vidéo est utilisé, un câble audio est nécessaire pour la connexion du son.
Téléviseur ACL de 27 po Insignia NS-27LCD Connexion d’un caméscope Connexion d’un lecteur de DVD : • Brancher le câble HDMI sur la prise HDMI au dos de l’appareil et sur la prise de sortie HDMI sur le panneau arrière du lecteur de DVD. Avertissement S’assurer d’éteindre et de débrancher l’appareil avant l’installation de périphériques. Se référer au schéma ci-après pour la connexion d’un caméscope au téléviseur.
Téléviseur ACL de 27 po Insignia NS-27LCD Connexion d’un récepteur TVN Se référer au schéma ci-après pour la connexion d'un ordinateur à l'appareil. Avertissement S’assurer d’éteindre et de débrancher l’appareil avant l’installation de périphériques. TV G = Vert (Y) W = Blanc (audio gauche) R = Rouge (audio droite, Cr.
Téléviseur ACL de 27 po Insignia NS-27LCD 4 Sélectionner Air (Réception hertzienne) en cas de raccordement à une antenne externe. Sélectionner Cable (Câble), Cable HRC (Câble HRC), Cable IRC (Câble IRC) ou Cable Auto (Câble automatique) pour la TV câblée. Il est recommandé de sélectionner Cable Auto (Câble automatique) pour la TV câblée. Pour plus d’informations sur la sélection de la TV câblée, contacter le câblo-opérateur. 5 Appuyer sur EXIT (Quitter) pour fermer le menu d’écran.
Téléviseur ACL de 27 po Insignia NS-27LCD • • HDMI – HDMI jack (Prise HDMI) S-Vidéo – S-Video jack (Prise S-Vidéo) Vérification de la puissance du signal TVN Pour vérifier la puissance du signal TVN : 1 Appuyer sur MENU. 2 Appuyer une ou plusieurs fois sur ou pour sélectionner Setup (Configuration), puis sur OK ou pour ouvrir le menu de configuration. 3 Appuyer une ou plusieurs fois sur ou pour sélectionner DTV Signal (Signal TVN) puis sur OK ou . L’appareil affiche la puissance du signal TVN.
Téléviseur ACL de 27 po Insignia NS-27LCD Visualisation des sous-titres codés Les sous-titres codés peuvent être visualisés dans deux modes : LÉGENDE et TEXTE. Pour chaque mode, quatre canaux sont disponibles. Le mode LÉGENDE affiche le texte des dialogues et des commentaires d’émissions de télévision tout en permettant un affichage clair des images.
Téléviseur ACL de 27 po Insignia NS-27LCD Pour paramétrer la classification : 1 Appuyer sur MENU. 2 Appuyer une ou plusieurs fois sur ou pour sélectionner Feature (Fonctionnalités), puis sur OK ou pour ouvrir le menu des fonctionnalités. 3 Appuyer une ou plusieurs fois sur ou pour sélectionner Parental Control (Contrôle parental), puis sur OK ou pour ouvrir le menu de contrôle parental.
Téléviseur ACL de 27 po Insignia NS-27LCD Menu d’écran Options Menu d’écran Options Audio Remarque : Les options varient en fonction des différents modes disponibles. Sound Mode (Mode sonore) – Sélectionne le mode sonore : User (Utilisateur), News (Nouvelles), Music (Musique) ou Movie (Film). Il est aussi possible d’appuyer sur AUDIO pour sélectionner le mode sonore. Bass (Graves) – Règle les graves (notes basses). Treble (Aigus) – Règle les aigus (notes puissantes).
Téléviseur ACL de 27 po Insignia NS-27LCD 5 Saisir le code à cinq chiffres du périphérique. Le témoin DEL clignote chaque fois qu’un chiffre est saisi. Si le code est correct, le témoin DEL clignote deux fois. Remarque Si le témoin DEL de clignote pas deux fois, répéter les étapes 3 à 5 en essayant un code différent. 6 Pointer la télécommande vers le périphérique, puis appuyer sur . Le périphérique devrait s’éteindre.
Téléviseur ACL de 27 po Insignia NS-27LCD Anomalie Solution possible Anomalie La télécommande ne Vérifier que le périphérique est doté contrôle pas un d'un capteur de télécommande, puis périphérique ou ne essayer un autre code. commande que certaines fonctionnalités de celui-ci Pas de volume sur le périphérique Voir « Programmation du verrouillage de volume » voir page 38. Entretien • Bonne image mais pas de son • Augmenter le volume. • Vérifier que le son n’est pas mis en sourdine.
Téléviseur ACL de 27 po Insignia NS-27LCD Anomalie Solution possible Le téléviseur émet des craquements • Les craquements se produisent quand le châssis du téléviseur se dilate ou se contracte sous l’effet de variations de températures. Ceci est normal. Spécifications • • La conception et les spécifications sont sujettes à modifications sans avis préalable. Le poids et les dimensions indiqués sont approximatifs.
Téléviseur ACL de 27 po Insignia NS-27LCD Memorex 20035, 20162, 20037, 20048,20039, 20047, 20240, 20104, 20209, 20479 Sony 20035, 20032, 20033, 20636,21972 MGA 20240, 20043 MGN Technology 20240 Microsoft 21972 Mind 21972 Minolta 20042 Mitsubishi 20067, 20043 Motorola 20035, 20048 MTC 20240 Multitech 20072 NEC 20035, 20037, 20048, 20104,20067, 20038 TMK 20240 Newave 20037 Toshiba 20045, 20042, 20067, 20043,21503, 21008, 21972 Nikko 20037 Totevision 20037, 20240 Noblex 20240
Téléviseur ACL de 27 po Insignia NS-27LCD 42 Funai 20675 Sony 20533, 20864, 21033, 21904, 21903 Gateway 2000 21158, 21073 SVA 20717 GE 20522, 20717 Sylvania 20675 Go Video 20744, 20833, 21099, 20783,21075, 20869, 21730 Symphonic 20675 Teac 20717, 21984, 20809 Technics 20490 Theta Digital 20571 Greenhill 20717 Harman Kardon 20582, 20702 Hitachi 20573, 20664, 21919 Hiteker 20672 Initial 20717 Integra 20627, 21924 JBL 20702 JVC 20558, 20623, 20867 Kenwood 20490, 20534
Téléviseur ACL de 27 po Insignia NS-27LCD Starcom 00003, 00014 Supercable 00276 Supermax 00883 Tocom 00012 Torx 00003 Toshiba 00000 Trans PX 00276 Tristar 00883 TS 00003 Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Avertissement Cet appareil peut générer ou utiliser de l'énergie radiofréquence.
Televisor con Pantalla LCD de 27" Insignia NS-27LCD Televisor con Pantalla LCD de 27" Insignia NS-27LCD Contenido Información de seguridad . . . . . . . . . . . . . . . . . .44 Características . . . . . . . . . . . . . . . . . . . . . . . . . . .46 Preparación de su TV . . . . . . . . . . . . . . . . . . . . .49 Uso de su TV . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 Programación del control remoto . . . . . . . . . . . . .59 Mantenimiento . . . . . . . . . . . . . . . . . . . . . . . . . .
Televisor con Pantalla LCD de 27" Insignia NS-27LCD Rayos Para protección adicional del receptor de TV durante una tormenta eléctrica, o cuando se deje sin supervisión o sin usar por largos periodos de tiempo, desconéctelo del tomacorriente y desconecte la antena o el sistema de cable. Esto ayudará a evitar daños a su TV debido a relámpagos o sobretensiones en las líneas de alimentación.
Televisor con Pantalla LCD de 27" Insignia NS-27LCD 3 Abrazaderas de tierra 4 Conductores de conexión a tierra 5 Unidad de descarga de antena 6 Abrazadera de tierra 7 Cable conductor de entrada de antena Lado Nota para el instalador del sistema CATV Este recordatorio se proporciona para que el instalador del sistema CATV preste atención al Artículo 820-40 del NEC el cual proporciona pautas para una correcta conexión a tierra y, en particular, especifica que la conexión a tierra del cable debe est
Televisor con Pantalla LCD de 27" Insignia NS-27LCD Conectores posteriores Conector 1 S/PDIF 2 HDMI 3 Entrada D-SUB AUDIO 4 Entrada D-SUB PIC (video) 5 ENTRADA DE COMPONENTE Y 6 ENTRADA DE COMPONENTE Cb/Pb 7 ENTRADA DE COMPONENTE Cr/Pr 8 ENTRADA DE COMPONENTE DE AUDIO DERECHO 9 ENTRADA DE COMPONENTE DE AUDIO IZQUIERDO 10 RF (entrada de antena) 11 S-VIDEO 12 VIDEO DE LA ENTRADA AV 13 AUDIO IZQUIERDO DE LA ENTRADA AV 14 AUDIO DERECHO DE LA ENTRADA AV 15 AURICULARES 16 AUDIO DERECHO DE LA S
Televisor con Pantalla LCD de 27" Insignia NS-27LCD Control remoto Nota Este control remoto es universal. Si pareciera que el control remoto no funciona con su televisor, presione el botón TV. Nota Para obtener instrucciones acerca de la programación del control remoto, refiérase a Programación del control remoto” en la página 59. Botón Descripción 3 Botones numéricos Permiten ingresar los números de canal.
Televisor con Pantalla LCD de 27" Insignia NS-27LCD Botón Preparación de su TV Descripción 24 Permite avanzar rápidamente en un DVD o CD si un reproductor de DVD o de CD está conectado. 25 Permite saltar hacia el siguiente capítulo en un DVD o la siguiente pista en un CD si un reproductor de DVD o de CD está conectado. 26 APAGADO AUTOMÁTICO Permite configurar el temporizador de apagado automático. Para obtener más información, vea “Ajuste del temporizador de apagado automático” en la página 56.
Televisor con Pantalla LCD de 27" Insignia NS-27LCD Conexión de su TV a un tomacorriente eléctrico Para conectar su TV a un tomacorriente eléctrico: • Enchufe el cable de alimentación en un tomacorriente eléctrico. Notas • Verifique que se está usando el tipo de alimentación correcta. Refiérase a la etiqueta en su TV. • Si no piensa usar su TV por un período de tiempo extendido, desenchufe el cable de alimentación del tomacorriente eléctrico.
Televisor con Pantalla LCD de 27" Insignia NS-27LCD Para conectar TV por cable con una caja convertidora/decodificadora: • Refiérase a la siguiente figura para conectar una caja convertidora/decodificadora. (El conmutador de RF y el divisor de señal no se suministran.) Mueva el conmutador de RF a la posición A para ver los canales sin codificación usando el control remoto de su TV.
Televisor con Pantalla LCD de 27" Insignia NS-27LCD Refiérase a la siguiente figura para conectar un VCR para grabar programas de TV. TV Y=amarillo (video) W=blanco (audio izquierdo) R=rojo (audio derecho) Conexión de una cámara de video Advertencia Verifique que apague y desconecte su TV antes de instalar dispositivos. Refiérase a la siguiente figura para conectar una cámara de video a su TV.
Televisor con Pantalla LCD de 27" Insignia NS-27LCD Conexión de un reproductor de DVD Advertencia Verifique que apague y desconecte su TV antes de instalar dispositivos. Refiérase a la siguiente figura para conectar un reproductor de DVD a su TV. Conexión de un receptor de DTV Advertencia Verifique que apague y desconecte su TV antes de instalar dispositivos. G=verde (Y) W=blanco (audio izquierdo) R=rojo (audio derecho, Cr.
Televisor con Pantalla LCD de 27" Insignia NS-27LCD Conexión de una computadora Advertencia Verifique que apague y desconecte su TV antes de instalar dispositivos. Refiérase a la siguiente figura para conectar una computadora a su TV. TV 4 Seleccione Air (Aire) para una antena exterior. Seleccione Cable, Cable HRC, Cable IRC, o Cable Auto para TV por cable. Le recomendamos que seleccione Cable Auto para TV por cable.
Televisor con Pantalla LCD de 27" Insignia NS-27LCD Cambio de canales Para cambiar los canales: • Presione el botón CH – o + en el control remoto para ir al siguiente canal más abajo o más arriba. O Presione los botones numéricos para seleccionar un canal. Por ejemplo, si quiere el canal 83, presione 8, luego presione 3. O Presione el botón para ir al último canal visto. Selección de un sub-canal digital La mayoría de canales de TV digital tienen más de un canal.
Televisor con Pantalla LCD de 27" Insignia NS-27LCD 4 Presione el botón o una o más veces para resaltar Time Set Mode (Modo de Ajuste de Hora), luego presione el botón OK (Aceptar) o para seleccionar Auto. 5 Presione el botón o una o más veces para resaltar Time Zone (Zona Horaria), luego presione el botón OK (Aceptar) o para seleccionar una zona horaria. Pacifico, Alaska, Hawai, Del Este, Central o Montaña. 6 Presione el botón EXIT (Salir) para cerrar el sistema de menú de pantalla.
Televisor con Pantalla LCD de 27" Insignia NS-27LCD 5 Presione los botones numéricos para ingresar la contraseña antigua. Si no ha configurado una contraseña, ingrese 0000. 6 Presione el número de botones para ingresar una contraseña nueva, luego ingrese la contraseña nueva de nuevo para confirmar. Cuidado Escriba su contraseña y guárdela para uso futuro. Nota Si olvida su contraseña, ingrese 1397 cómo contraseña antigua e ingrese una contraseña nueva.
Televisor con Pantalla LCD de 27" Insignia NS-27LCD Menús de pantalla Menú de pantalla Vídeo Nota: Las opciones pueden variar en diferentes modos. 58 Menú de pantalla Opciones Picture Mode (Modo de Imagen) – Selecciona el modo de imagen: User (Usuario), Nature (Naturaleza), Soft (Suave), o Bright (Brillante). También puede presionar el botón PICTURE (Imagen) para seleccionar el modo de imagen. Contrast (Contraste) – Aumenta el nivel de la imagen para ajustar sus áreas blancas.
Televisor con Pantalla LCD de 27" Insignia NS-27LCD Menú de pantalla Función Opciones Source (Fuente) – Selecciona la fuente de la señal de video. Se puede seleccionar: • TV • Composite1 (Compuesto 1) • Composite2 (Compuesto 2) • Component1 (Componente 1) • Component2 (Componente 2) • VGA • HDMI • S-Video También puede presionar el botón INPUT (Entrada) para seleccionar la fuente de la señal de video. Time Set (Ajuste de la Hora) – Ajusta el reloj.
Televisor con Pantalla LCD de 27" Insignia NS-27LCD 5 Repita el paso 4 usando 2 para el segundo dígito, 3 para el tercer dígito, 4 para el cuarto dígito, y 5 para el quinto dígito. 6 Presione el botón SET (Establecer) para salir. Mantenimiento • No utilice su TV en áreas que son demasiado caliente o frío porque el gabinete se puede doblar o la pantalla puede funcionar mal. • Las temperaturas de almacenamiento son de 32 °F a 122 °F (0 °C a 50 °C).
Televisor con Pantalla LCD de 27" Insignia NS-27LCD Síntoma Imagen insatisfactoria Especificaciones Solución probable • Verifique que la habitación no es muy brillante. La luz reflejándose en la pantalla puede hacer que sea difícil ver la imagen. • Si una cámara S-VHS o una cámara de video se conectan mientras se enciende otro equipo conectado, puede ser que la imagen se vea insatisfactoria. Apague uno o más equipos. • • El diseño y las especificaciones están sujetos a cambio sin aviso previo.
Televisor con Pantalla LCD de 27" Insignia NS-27LCD CyberPower 21972 Minolta Daewoo 20045, 20104, 20278 Mitsubishi 20067, 20043 Dell 21972 Motorola 20035, 20048 Denon 20042 MTC 20240 DirecTV 20739 Multitech 20072 Durabrand 20039, 20038 NEC Electrohome 20037 20035, 20037, 20048, 20104,20067, 20038 Electrophonic 20037 Newave 20037 Emerex 20032 Nikko 20037 Noblex 20240 Northgate 21972 Olympus 20035 Optimus 21062, 20162, 20037, 20048,20104, 20432 Emerson 62 20035, 2003
Televisor con Pantalla LCD de 27" Insignia NS-27LCD Tashiko 20037 Greenhill 20717 Tatung 20045, 20067 Harman/Kardon 20582, 20702 Technics 20035, 20162 Hitachi 20573, 20664, 21919 Teco 20035, 20037, 20048, 20038 Hiteker 20672 Teknika 20035, 20037 Initial 20717 Tivo 20636, 20618, 21503, 20739 Integra 20627, 21924 TMK 20240 JBL 20702 Toshiba 20045, 20042, 20067, 20043,21503, 21008, 21972 JVC 20558, 20623, 20867 Kenwood 20490, 20534 Totevision 20037, 20240 Touch 21972 Unite
Televisor con Pantalla LCD de 27" Insignia NS-27LCD 64 Teac 20717, 21984, 20809 Technics 20490 Theta Digital 20571 Toshiba 20503, 20695 Urban Concepts 20503 Xbox 20522 Yamaha 20490, 20539, 20545 Zenith 20503, 20591, 20869 Códigos de convertidores de cable ABC 00003, 00008, 00014 Americast 00899 Bell & Howell 00014 Bell South 00899 Clearmaster 00883 ClearMax 00883 Coolmax 00883 Daeryung 01877, 00877, 00477, 00008 Digi 00637 Director 00476 Dumont 00637 Gehua 00476 Gen
Televisor con Pantalla LCD de 27" Insignia NS-27LCD Vision 00883 Vortex View 00883 Zenith 00000, 00525, 00899 Advertencia Este equipo podría generar o usar energía de radiofrecuencia. Los cambios o modificaciones que se realicen a este equipo podrían causar interferencia perjudicial a menos que las modificaciones estén expresamente autorizadas en el manual de instrucciones. El usuario podría perder la autoridad de operar este equipo si se realiza un cambio o modificación no autorizada.
Televisor con Pantalla LCD de 27" Insignia NS-27LCD 66 www.insignia-products.
Televisor con Pantalla LCD de 27" Insignia NS-27LCD www.insignia-products.
Televisor con Pantalla LCD de 27" Insignia NS-27LCD 70 www.insignia-products.