DIGITAL CAMERA User Manual

Rev 3 5 G-113077-001

02/07

2. Slowly turn the LEVEL potentiometer until the picture

on the monitor is as clear as possible and is not too

bright.

Video Drive (VSD) Lens

Set the VSD/DC switch on the rear of the camera (see

Figure 3) to VSD.

Exposure Mode

Automatic Exposure Mode

The Electronic Exposure feature compensates for

excessive light levels by automatically adjusting the shutter

speed of the camera. Set the EE/ME switch to EE

(recommended setting).

Manual Exposure Mode

Set the EE/ME switch to ME. This setting is typically used

only in machine vision applications. The table below gives

the shutter speeds for the switch settings.

Caution Before you adjust the shutter speed, it is

important that you understand how the settings

can affect the scene detail.

Switch Label

Shutter

speed(s)

FL BLC AES/AI

1/50 (PAL)

1/60 (NTSC)

OFF ON OFF

1/100 (PAL)

1/120 (NTSC)

ON ON OFF

1/250 OFF OFF OFF

1/500 ON OFF OFF

1/1000 OFF ON ON

1/2000 ON ON ON

1/4000 OFF OFF ON

1/10000 ON OFF ON

AES

OFF

BLC

AGC

WB3

WB2

WB1

= ON

= OFF

LEGEND