NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 1 Wednesday, May 7, 2014 1:33 PM USER GUIDE Wood Finish and Glass 3-in-1 TV Stand for TVs up to 52”/135 lbs. NS-3IN1MT50C/NS-3IN1MT50C-C SAFETY INFORMATION AND SPECIFICATIONS .2 PACKAGE CONTENTS: PARTS ..................................4 PACKAGE CONTENTS: HARDWARE .......................5 ASSEMBLY INSTRUCTIONS ......................................7 CARE AND MAINTENANCE ...................................
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 2 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND SAFETY INFORMATION AND SPECIFICATIONS CAUTION: The top surface of this stand is designed for use with a product weighing no more than 135 lbs. (61.2 kg) and having a width that permits it to sit evenly on the stand with no more than a one-inch overhang on each side of the shelf.
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 3 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND Tools needed: Phillips screwdriver Pencil Edge-to-edge stud finder Power drill Level Hammer 1/2” Socket wrench www.insigniaproducts.
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 4 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND PACKAGE CONTENTS: PARTS Make sure that you have all the parts necessary to assemble your new TV stand.
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 5 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND PACKAGE CONTENTS: HARDWARE Note: You may receive extra hardware.Note: You may receive extra hardware. Make sure that you have all the hardware necessary to assemble your new TV stand. Label R S T Hardware Cable clip Suction cup Bolt 3/4” (19.05 mm) Qty. 2 Label Hardware X Lock washer 32 Y Flat washer 36 Z Hex nut 19 Bolt 1 3/8” (34.92 mm) 8 8 Lag bolt AA U Qty.
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 6 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND PACKAGE CONTENTS: HARDWARE (continued) Label Hardware Qty. Label Hardware QQ GG II Lock washer M4 Bolt M4 × 12 mm RR Lock washer M5 4 SS Lock washer M6 4 TT Lock washer M8 4 4 4 Bolt M4 × 30 mm JJ Bolt M5 × 12 mm 4 KK Bolt M5 × 30 mm 4 Large spacer UU LL Bolt M6 × 12 mm 4 MM Bolt M6 × 35 mm 4 NN Bolt M8 × 16 mm 4 VV PP 4 1 Tipping restraint hardware kit HH Qty.
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 7 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND ASSEMBLY INSTRUCTIONS Step 1: Align and attach the left and right side frames (A and B) to the back frame (C) Caution: Assemble your stand on a carpeted floor or the empty carton to avoid scratching your stand.
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 8 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND Step 2: Align and attach the upper and middle crossbars (E and G) and the bottom brace (I) to the side frames (A and B) 1 Insert two 1 5/8” bolts (V) through the lock washers (X) and flat washers (Y) through the drilled holes on the top rail of the side frames (A and B) and securely screw into the threaded holes of the top crossbar (E).
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 9 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND Step 3: Align and attach the front stringers (F, H, and J) to the front of the side frames (A and B) 1 Insert two 1 5/8” bolts (V) through the lock washers (X) and flat washers (Y) through the drilled holes on the top rail of the side frames (A and B) and securely screw into the threaded holes of the top stringer (F).
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 10 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND Step 4: Leveling the stand Stand the assembled frame upright. Adjust the levelers on the side frames (A and B) to level the assembly. NOTE: For swivel stand assembly, see “SWIVEL STAND ASSEMBLY INSTRUCTIONS” on page 22. For Wall Mount or Table Top assembly, continue to the next step. 10 www.insigniaproducts.
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 11 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND Step 5: Attach the cable clips • Attach two of the cable clips (R) to the back of the side frames (A and B) with two 3/4" bolts (T) per cable clip. You’ll need: R (2) T (4) EE (1) www.insigniaproducts.
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 12 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND Step 6: Attach the shelves 1 Insert the suction cups (S) into the top holes and the metal tabs of the crossbars and stringers, the bottom stringer (J) (4 cups). Upper crossbars and stringers (E, F, G and H) and bottom brace (I) (3 cups each).
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 13 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND FINAL TABLE TOP ASSEMBLY INSTRUCTIONS Step 7: Position the TV stand and install the tipping restraint hardware kit 1 Position the assembled stand against a wall where you plan to use it. 2 Follow the instructions printed on the bag containing the tipping restraint hardware kit (GG) to attach the restraint hardware to the wall and the stand.
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 14 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND WALL MOUNT ASSEMBLYINSTRUCTIONS Step 1: Select the correct bolts, washers, and spacers for your TV.
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 15 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND Step 2: Determine whether your TV has a flat back or an irregular or obstructed back 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 If your TV has a table-top stand attached, remove the stand. See the documentation that came with your TV for instructions. 3 Temporarily lay the TV brackets (Q) on the back of your TV.
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 16 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND Step 3: Option 1 - Mounting bracket instructions for a TV with a flat back To mount the TV brackets: 1 Align the TV brackets (Q) with the mounting screw holes on the back of the TV. Make sure the hooks face the bottom of the TV. Make sure that the brackets are level.
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 17 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND Step 3: Option 2 - Mounting bracket instructions for a TV with an irregularly shaped or obstructed back 1 Align the TV brackets (Q) with the mounting screw holes on the back of the TV. Make sure the hooks face the bottom of the TV. Make sure that the brackets are level.
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 18 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND Step 4: Option 1 - Mount the frame to a stud wall NOTE: See Step 4: Option 2 for instructions on mounting the frame to a concrete wall. 2.50” (64 mm) BB 0.19” (4.76 mm) 1 Use a stud sensor to locate two adjacent wall studs, then position the mounting frame (P) exactly between the two studs. 2 Use a level to make sure that the mounting frame is level, then mark the four mounting holes.
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 19 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND Step 4: Option 2 - Mount the frame to a block or concrete wall 2.50” (64 mm) 0.43” (11 mm) 1 Place the mounting frame (P) against the wall where you intend to mount the TV. Use a level to make sure the mounting frame (P) is level, then mark the four mounting holes on the wall. Never locate the mounting holes into the mortar between blocks. Remove the mounting frame.
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 20 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND Step 5: Attaching the TV to the mounting frame on the wall 1 Lift the TV up to the mounting frame (P). 2 Set the hooks on TV brackets (Q) over the mounting frame, then lower the hooks onto the bars on mounting frame. 3 Center the TV, then secure it in place using a screwdriver to tighten the safety bolt on the bottom hooks. 4 Place the stand with the glass shelves under the TV.
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 21 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND Step 6: Position the TV stand and install the tipping restraint hardware kit 1 Position the assembled stand against a wall where you plan to use it. 2 Follow the instructions printed on the bag containing the tipping restraint hardware kit (GG) to attach the restraint hardware to the wall and the stand.
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 22 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND SWIVEL STAND ASSEMBLY INSTRUCTIONS Step 1: Align and attach the long rear support 1 Insert four 2¼" bolts (W) through the lock washers (X) and the flat washers (Y) through the drilled holes on the long rear support (D). 2 Securely screw into the threaded holes of the side frames (A and B). Make sure that the sockets for the cable clips face backward. Sockets for cable clips face backward.
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 23 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND Step 2: Attach the swivel bracket 1 Align the swivel bracket (N) at the height you would like the center of your TV to be. 2 Insert a 2¼” bolt (W) through a lock washer (X) and a flat washer (Y) and then through the swiveling bracket (N) and the drilled hole on the long rear support (D).
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 24 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND Step 3: Attach the mounting frame to the swivel bracket 1 Hold the flat side of the mounting frame (P) against the swivel bracket (N), aligning the holes. Make sure that the two recessed holes on mounting frame (P) are at the bottom. 2 Insert a 3/4" bolt (T) through a flat washer (Y) and then through the hole connecting mounting frame (P) with swiveling bracket (N).
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 25 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND Step 4: Attach the cable clips • Attach the cable clips (R) to the back of the long rear support (D) in two of four locations with two 3/4" bolts (T) per cable clip. You’ll need: R (2) T (4) EE (1) www.insigniaproducts.
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 26 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND Step 5: Attaching the TV to the mounting frame on the swivel bracket 1 Attach the TV brackets (Q) to the back of the television following the steps on pages 15, 16, and 17, depending on the type of TV that you own. 2 Lift the TV up to the mounting frame (P). 3 Set the hooks on TV brackets (Q) over the mounting frame (P), then lower the hooks onto the bars of the mounting frame.
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 27 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND Step 6: Attach the shelves 1 Insert the suction cups (S) into the top holes and the metal tabs of the crossbars and stringers, the bottom stringer (J) (4 cups). Upper crossbars and stringers (E, F, G and H) and bottom brace (I) (3 cups each).
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 28 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND Step 7: Position the TV stand and install the tipping restraint hardware kit 1 Position the assembled stand against a wall where you plan to use it. 2 Follow the instructions printed on the bag containing the tipping restraint hardware kit (GG) to attach the restraint hardware to the wall and the stand.
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 29 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND CARE AND MAINTENANCE Wood/Laminate • Use your favorite type of furniture polish. • Do not spray polish directly onto the stand. Spray onto a soft cloth then wipe the stand. • Always test any polish in a discrete location first, such as the back of the stand, to make sure that there is no adverse reaction. • Dust frequently with a soft cloth. • Never slide objects across surfaces.
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 30 Wednesday, May 7, 2014 1:33 PM 3-in-1 TV STAND ONE-YEAR LIMITED WARRANTY - INSIGNIA • Definitions: The Distributor* of Insignia branded products warrants to you, the original purchaser of this new Insignia-branded product (“Product”), that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”).
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 32 Wednesday, May 7, 2014 1:33 PM 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) www.insigniaproducts.com INSIGNIA is a trademark of Best Buy and its affiliated companies. Registered in some countries. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2014 Best Buy. All rights reserved.