User manual

27
3-in-1 TV STAND
www.insigniaproducts.com
Step 6 : Attach the shelves
1 Insert the suction cups (S) into the top holes and the metal tabs of the crossbars and stringers, the bottom
stringer (J) (4 cups). Upper crossbars and stringers (E, F, G and H) and bottom brace (I) (3 cups each).
TIP: If a suction cup resists insertion, try pressing down on the middle of the cup with the hex wrench while twisting it
clockwise into the hole, as if you were screwing it in.
2 Place the top glass shelf (K) with the black side down onto the suction cups on the top crossbar (E) and stringer
(F).
3 Place the middle glass shelf (L) with the black side down onto the suction cups on middle crossbar (G) and
stringer (H).
4 Place the bottom glass shelf (M) with the black side down onto the suction cups on bottom brace (I) and
stringer (J).
You’ll need:
S (19)
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 27 Wednesday, May 7, 2014 1:33 PM