TM Color TV IS-TV040922 User's Manual Before connecting, operating or adjusting this product, please read the manual completely.
Contents Congratulations on your purchase of this color television. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this equipment. Retain this manual in an easily accessible location for future reference. * Screen displays and illustrations in this manual may differ from the actual ones for better visibility. Contents Important Safety Instructions ................................................................................
Important safety instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Important safety instructions 13. LIGHTNING To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. 14.
Identification of Controls Front (2) R L/MONO AV IN R L VIDEO VIDEO Power Button VOL+ MENU Power indicator Remote Sensor MENU CH + VOL AV/ T V CH AV2 input (VIDEO, AUDIO: L/MONO,R) AV/TV Volume down/up Channel down/up Back Back DVD input (VIDEO: Y,CB,C,R AUDIO:L/MONO,R) AV1 input(VIDEO, AUDIO: L/MONO,R) AV output (VIDEO, AUDIO: L,R) (1 ) VIDEO Y L/MONO CB S -VIDEO S-VIDEO input YUV RF VIDEO L AUDIO AUDIO CR R 4 R Antenna input
Identification of Controls Remote control TV/AV Power on/Standby STEREO 1 2 3 4 5 6 CCD Direct channel select DSP 7 8 TV/VIDEO input select To switch between STEREO, SAP or MONO Closed Caption decoder channel select Recall on-screen display 9 MUTE Sound mute 0 Return to previous channel Sleep timer P SCAN Picture mode select Program scan Parental Control Picture adjust Select higher program CH+ Volume down Open the menu V- MENU CH- V+ Volume up Select lower program 5
Antenna connection CABLE TV (CATV) CONNECTION A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75- ohm coaxial cable to the set, screw the 75-ohm cable to the ANT. Terminal. Some cable TV companies offer "premium pay channels". Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company.
Preparing the remote control Installing batteries Effective range of the Remote 1 Open the battery cover. 2 30 O O 30 5m Install two "AA” batteries matching the +/- polarities of the battery to the +/marks inside the battery compartment. 3 Replace the battery cover. Notes: Notes: / When there is an obstacle between the TV and the transmitter, the transmitter may not operate.
External equipment connections The following describes how to use and connect the TV with other AV equipment (for example, VTR, Video Camera, DVD, Video game, etc.) Please refer to the owner's manual of the equipment to be connected as well. To connect AV input terminals Connect side AV inputs IIIIIIIIIIIII IIIIIIIIIIIII Y Yellow (video) (2) R W TV SET SIDE White (audio L/MONO) R Red (audio R ) Y To access the unit connected to these jacks, press TV/AV button until AV2 appears on the screen.
External equipment connections To connect DVD input terminals The figure below shows how to connect the DVD input terminals of the TV set to the DVD Player, Laser Disk Player,etc. The TV set rear (1 ) DVD Player, Laser Disk Player etc.
Power on/off Turning on TV/AV 1 Insert the AC plug (with the 2 blades) into a conveniently located AC outlet. If no picture appears on the screen and the standby indicator lights up, the TV set is in STANDBY mode. Now please follow step 2. STEREO 1 2 3 CCD 4 5 6 7 8 9 DSP MUTE In STANDBY mode, press Power ( ) button on the remote controller or on the TV set and the TV set is turned on.
Selecting input signal Watching AV program TV/AV STEREO 1 2 3 CCD 4 5 6 7 8 9 DSP TV/AV This TV set provides AV input terminals for your convenient connection to VCR, DVD or other video equipments. To watch video program from AV inputs, press 1 TV/AV button repeatedly until you see the appropriate input indicator on the screen. AV1 AV2 SVHS DVD 12 MUTE 0 P SCAN NOTE: AV1: Select AV1 when viewing the signals from the video equipment connected to the AV1 IN terminals.
Tuning in TV/CATV selection Before your TV can memorize the available channels, you must specify the type of signal source that is connected to the unit. (i.e., an antenna or cable system) TV/AV 1 Press MENU repeatedly to display Search menu. Press CH- or CH+ to select 2 Signal Input. STEREO 1 2 3 CCD 4 5 6 7 8 9 DSP DSP 3 MUTE 0 Air 28 Off Press V+ 0 Select Air if using VHF/UHF antenna, select CATV if using Cable TV.
Tuning in To skip unwanted channel After presetting the channels, you can skip unwanted channels so that only the channels you want to watch are selected with Channel up/down buttons. Select the unwanted channel with channel select buttons. TV/AV STEREO 1 2 3 CCD 4 5 6 7 8 9 Direct channel select buttons DSP 1 DSP MUTE 2 0 Search Signal Input Channel Skip Auto Search Fine tune Air 28 On Press V+ 0 Press CH- or CH+ to select Skip, press V- or V+ to select Skip ON.
Channel selection You can select your desired TV program by one of the following methods. Use Direct Channel Select buttons ? AIR Mode Direct Channel Selection TV/AV STEREO 1 2 3 Direct channel select buttons CCD 4 5 6 DSP 7 8 9 DSP When the Signal Input menu option in Search menu is in the Air position, all channels can be selected by directly entering the channel number.
Picture adjustment To select the picture mode You can select the picture quality instantly among three preset modes and one user-set mode. TV/AV Dynamic STEREO 1 2 3 CCD 4 5 6 7 8 9 DSP Standard DSP P Press button to select the desired picture quality. Standard, Dynamic, Mild and User (user-set) can be selected cyclically.
Sound controls Adjusting volume 1 Use Volume up/down button Press V- button, the volume decreases; TV/AV STEREO 1 2 STEREO 3 Press V+ button, the volume increases. Volume 50 CCD 4 5 6 7 8 9 2 Make use of Sound menu to adjust volume DSP MUTE 0 MUTE Press MENU twice to display Sound menu, then make use of V+/- button to adjust the level. Sound Volume P SCAN 3 Use MUTE button. CH+ V- MENU V+ V- If you want to mute the sound, press MUTE button on the remote.
Timer setting Setting clock time Making use of this function can set the current time for the TV. 1 TV/AV STEREO 1 2 3 CCD 4 5 6 DSP 7 8 9 DSP 2 3 Press CH- or CH+ to select Clock. Clock On Time On Program Off Time Repeat 10:05 - -:- 32 - -:- Once Press V- to set the hour (0-23), press V+ to set the minute (00-59). Note: Before setting the ON timer and OFF timer, please set the Clock item first. MUTE 0 P SCAN Timer Press MENU repeatedly to display the Timer menu.
Timer setting Setting OFF timer With the OFF timer, the TV will automatically switch to standby mode at a preset time. Timer In Timer menu, press CH- or 1 TV/AV STEREO 1 2 3 CCD 4 5 6 DSP 7 8 9 DSP MUTE 2 CH+ to select Off Time. Press V- to set the hour (0-23), press V+ to set the minute (0059). Clock On Time On Program Off Time Repeat 10:08 18:00 32 13:30 Once Press CH- to select Repeat. Press V- or V+ to select Once or Everyday.
System Settings To select OSD language There are multi OSD languages in this TV set provided for you to select (OSD: on-screen display) Settings Press MENU repeatedly to 1 display Settings menu. TV/AV STEREO 1 2 3 2 Press CH+/- to select Language. CCD 4 5 6 7 8 9 DSP DSP English Language Blue Screen On Off Picture Enhance CC1 Caption Mode Game 3 Press V+ or V- to select a proper OSD language. MUTE 0 Setting Blue Screen 1 Enter into Settings menu.
Closed Captions The unit decodes and displays the closed captions that are broadcast with certain TV shows. These captions are usually subtitles for the hearing impaired or foreign language translations. All VCRs record the closed caption signal from television programs, so home-recorded video tapes also provide closed captions. Most prerecorded commercial video tapes provide closed captions as well. Check for the closed caption symbol in your television schedule and on the tape’s packaging: .
Setting Parental Control Parental Control enables parents to prevent their children from watching inappropriate material on TV. Parental Control reads the ratings for programming (except for news, sports, unedited movies on premium cable and Emergency System signals ), then denies access to programming if the program's rating meets the limitations you select. In this case, the program will be blocked.
Setting Parental Control U.S. TV Rating Set-up TV Parental Guidelines may have one or more letters added to the basic rating to let parents know when a show contains higher levels of violence, sex, adult language or suggestive dialogue. TV/AV STEREO 1 2 3 0-9 digit buttons Press button and then input the correct password to enter 1 into Parental Control menu. Parental Control CCD 4 5 6 7 8 9 DSP DSP MUTE Press CH- or CH+ button 2 select U.S. TV Rating item.
Setting Parental Control Movie Rating Set-up Rating guidelines are provided by broadcast stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-video movies use the Movie Rating System (MPAA) only. TV/AV STEREO 1 2 3 0-9 digit buttons 1 CCD 4 5 Parental Control 6 DSP 7 8 9 DSP 2 MUTE 0 Press CH- or CH+ button to select MPAA Rating item.
Setting Parental Control CANADA English Rating Set-up into Parental Control 1 Enter menu, press CH- or CH+ button to select CANADA English menu item. Press V+ or V- button to enter into the sub-menu. TV/AV STEREO 1 2 3 0-9 digit buttons Parental Control Password: * * * * * * U.S. TV Rating MPAA Rating CANADA English CANADA French Change Password CCD 4 5 6 DSP 7 8 9 DSP In CANADA English sub-menu, 2 use CH+/- to select the desired rating, use V+/- to toggle between Block and View.
Troubleshooting Guide Power Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION No power The AC power cord is not connected. Connect the AC power cord to the AC outlet TV station experiencing problems. Try another channel. Picture control is not adjusted. Check picture control adjustments. Possible local interference. Check for source of reception disturbance. Poor or no picture.
Troubleshooting Guide Reception disturbances Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results if not using cable. The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local cable company broadcast.
Specifications Power Supply Power Consumption Dimensions(inch) Weight(lbs) CRT(inch) Sound output Color System Accessory Receiving channel: VHF UHF CATV Total AC 120V 60Hz 140W (Max.) 27.6(W) x 20.1(H) x 19.0(D) 80 24” 4W+4W NTSC-M Remote control x 1 2-13 14-69 2-69, (A-6)-(A-1), A-W, (W+1)-(W+28) 181 channels Note: Design and specifications are subject to change without notice.
Manufactured for Insignia Products 7601 Penn Ave S.
