User Guide 24" LED TV NS-24E200NA14 Before using your new product, please read these instructions to prevent any damage.
Contents CHILD SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Connecting a basic home theater system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Using digital audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Using analog audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Connecting a home theater system with multiple devices . . . . . . . . . . . . . . . . .
Contents Adjusting time settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Setting the sleep timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Adjusting menu settings . . . . . . . . . . . . . . . . . . . . . .
f CHILD SAFETY It makes a difference how and where you use your flat panel display As you enjoy your new product, keep these safety tips in mind The issue The home theater entertainment experience is a growing trend, and larger TVs are popular purchases. However, TVs are not always supported on the proper stands or installed according to the manufacturer’s recommendations. We and the consumer electronics industry are committed to making home entertainment enjoyable and safe.
NS-24E200NA14 Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your TV. This label is located on the back of your TV. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your TV. 1 2 3 4 5 6 7 8 9 10 11 12 13 2 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
Safety check After completing any service or repair to this device, ask the service technician to perform routine safety checks to determine that your TV is in correct operating condition. Power source Operate your TV only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult an electrician or your local power company. Servicing These servicing instructions are for use by qualified service personnel only.
NS-24E200NA14 Insignia 24" LED TV Insignia 24" LED TV Introduction Congratulations on your purchase of a high-quality Insignia product. Your NS-24E200NA14 represents the state of the art in LED TV design and is designed for reliable and trouble-free performance. Installing the stand or wall-mount bracket Notes • If you plan to wall-mount your TV, do not install the stand. • Store the stand and stand screws in case you decide to use the stand in the future.
Insignia 24" LED TV 2 Secure the TV stand to the stand column with the four provided screws. Screw type Screw length # of screws B4 18 mm 4 www.insigniaproducts.
NS-24E200NA14 Insignia 24" LED TV Installing a wall-mount bracket Warning This TV is intended to be supported by a UL Listed wall mount bracket with suitable weight/load. (See “Miscellaneous” on page 65.) To attach your TV to a wall-mount bracket: 1 Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 Remove the three screws that secure the stand column to the TV, then remove the stand column. 6 www.insigniaproducts.
Insignia 24" LED TV 3 Attach the wall-mount bracket to your TV using the mounting holes on the back of your TV. See the instructions that came with the wall-mount bracket for information about how to correctly hang your TV. Notes • The length of the wall-mount screws vary depending on the wall-mount bracket you purchased. See the instructions that came with the wall-mount bracket for screw lengths. • The mounting holes on the back of your TV take type M4 screws. 3.94 in. (100 mm) 3.94 in. (100 mm) www.
NS-24E200NA14 Insignia 24" LED TV TV components Side Package contents • • • • • • 24" LED TV Remote control and batteries (2 AAA) Stand base and screws (4) Power adapter Quick Setup Guide Important Information Front # Item 1 2 # Item 8 1 Power indicator 2 Remote control sensor 3 INPUT 4 MENU 5 CHS/CHT 6 VOL+/VOL– 7 POWER 3 Description Turns off when your TV is on. Lights red when your TV is off (standby mode). Receives signals from the remote control. Do not block.
Insignia 24" LED TV Back # Item 1 2 3 4 5 6 Description Connect the power adapter to this jack and to a power outlet. Connect an HDMI device to this jack. For more information, see “Using HDMI (best)” on pages 12, 18, 22, or 26. OR HDMI 1/DVI Connect the video for a DVI device to this jack. For more information, see “Using DVI (same as HDMI but requires an audio connection)” on pages 13, 19 or 27. Connect the audio for a computer to this jack.
NS-24E200NA14 Insignia 24" LED TV Remote control # Button Description 11 Media controls These buttons have no function. 12 INPUT Press to open the INPUT SOURCE list, press S or T on the remote control to select the video input source, then press ENTER. For more information, see “Selecting the video input source” on page 37. 13 (return) In TV mode, press to return to the previous channel. 14 S T W X Press to navigate in on-screen menus and to adjust settings.
Insignia 24" LED TV What connection should I use? Your TV has several connection types for connecting devices to your TV. For the best video quality, you should connect a device to the best available connection.
NS-24E200NA14 Insignia 24" LED TV Connecting a cable or satellite box Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best connection type available. For more information, see “What connection should I use?” on page 11.
Insignia 24" LED TV Using DVI (same as HDMI but requires an audio connection) Note You must use the HDMI 1/DVI jack to connect a cable or satellite box. If you use another HDMI jack, you will not hear sound from the TV speakers. On your TV HDMI cable connector 3.5mm audio connector Cable or satellite box 3.
NS-24E200NA14 Insignia 24" LED TV Using component video (better) Note Cables are often color-coded to match color-coded jacks. Side of TV On your TV Component Analog video cable audio cable connectors connector Cable or satellite box Component video cable Audio cable Component video jacks Analog audio jacks To connect a cable or satellite box using component video: 1 Make sure that your TV’s power adapter is unplugged and all connected equipment is turned off.
Insignia 24" LED TV Using composite video (good) Notes • Cables are often color-coded to match color-coded jacks. • The yellow video connector on the AV cable connects to the green COMPONENT/AV Y/VIDEO jack.
NS-24E200NA14 Insignia 24" LED TV Using coaxial (good) On your TV Cable or satellite box Coaxial cable connector Coaxial jack Coaxial cable Back of TV To connect a cable or satellite box using coaxial: 1 Make sure that your TV’s power adapter is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
Insignia 24" LED TV Connecting an antenna or cable TV (no box) On your TV Antenna or cable TV (no box) Coaxial cable connector Coaxial jack Coaxial cable Back of TV To connect an antenna or cable TV (no box): 1 Make sure that your TV’s power adapter is unplugged and all connected equipment is turned off. 2 Connect a coaxial cable (not provided) to the ANT/CABLE jack on the back of your TV and to the antenna or cable TV wall jack. 3 Plug your TV’s power adapter into a power outlet, then turn on your TV.
NS-24E200NA14 Insignia 24" LED TV Connecting a DVD or Blu-ray player Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best connection type available. For more information, see “What connection should I use?” on page 11.
Insignia 24" LED TV Using DVI (same as HDMI but requires an audio connection) Note You must use the HDMI 1/DVI jack to connect a DVD or Blu-ray player using DVI. If you use another HDMI jack, you will not hear sound from the TV speakers. On your TV HDMI cable connector HDMI 1/DVI jack 3.5mm cable connector PC/DVI AUDIO IN jack DVD or Blu-ray player Back of TV 3.
NS-24E200NA14 Insignia 24" LED TV Using component video (better) Note Cables are often color-coded to match color-coded jacks. On your TV Component video cable connectors Component video jacks Side of TV Analog audio cable connectors Component video cable Analog audio jacks Audio cable DVD or Blu-ray player To connect a DVD or Blu-ray player using component video: 1 Make sure that your TV’s power adapter is unplugged and the DVD or Blu-ray player is turned off.
Insignia 24" LED TV Using composite video (good) Notes • Cables are often color-coded to match color-coded jacks. • The yellow video connector on the AV cable connects to the green COMPONENT/AV Y/VIDEO jack.
NS-24E200NA14 Insignia 24" LED TV Connecting a game console Using HDMI (best) On your TV Side of TV Game console HDMI cable connector HDMI cable HDMI jack To connect a game console using HDMI: 1 Make sure that your TV’s power adapter is unplugged and the game console is turned off. 2 Connect an HDMI cable (not provided) to the HDMI jack on the side or back of your TV and to the HDMI OUT jack on the game console. 3 Plug your TV’s power adapter into a power outlet, then turn on your TV.
Insignia 24" LED TV Using component video (better) Note Cables are often color-coded to match color-coded jacks. On your TV Game console Side of TV Component video cable connectors Analog audio cable connectors Component video jacks Analog audio jacks Console-specific component video and audio cable To connect a game console using component video: 1 Make sure that your TV’s power adapter is unplugged and the game console is turned off.
NS-24E200NA14 Insignia 24" LED TV Using composite video (good) Notes • Cables are often color-coded to match color-coded jacks. • The yellow video connector on the AV cable connects to the green COMPONENT/AV Y/VIDEO jack.
Insignia 24" LED TV Connecting a computer Using VGA (most common) On your TV VGA cable connector VGA jack Audio cable with stereo mini plug PC/DVI AUDIO IN jack Back of TV VGA cable Audio cable with stereo mini plug To connect a computer using VGA: 1 Make sure that your TV’s power adapter is unplugged and the computer is turned off. 2 Connect a VGA cable (not provided) to the VGA jack on the back of your TV and to the VGA jack on the computer.
NS-24E200NA14 Insignia 24" LED TV Using HDMI (best) On your TV Side of TV HDMI cable connector HDMI cable HDMI jack To connect a computer using HDMI: 1 Make sure that your TV’s power adapter is unplugged and the computer is turned off. 2 Connect an HDMI cable (not provided) to the HDMI jack on the side or back of your TV and to the HDMI OUT jack on the computer. 3 Plug your TV’s power adapter into a power outlet, then turn on your TV and the computer. 4 Press INPUT to open the INPUT SOURCE list.
Insignia 24" LED TV Using DVI (same as HDMI but requires an audio connection) Note You must use the HDMI 1/DVI jack to connect a computer using DVI. If you use another HDMI jack, you will not hear sound from the TV speakers.
NS-24E200NA14 Insignia 24" LED TV Connecting a USB flash drive Side of TV USB flash drive To connect a USB flash drive: 1 Plug a USB flash drive into the USB port on the side of your TV. Caution Do not remove the USB flash drive or turn off the TV while using the USB flash drive. You may lose data or damage the USB flash drive. 2 If your TV is turned on when you connect the USB flash drive, press S or T to select Yes in the message that appears. The PHOTOS menu opens.
Insignia 24" LED TV Connecting headphones When you connect headphones, the TV speakers are muted. Warning Loud noise can damage your hearing. When using headphones, use the lowest volume setting on your headphones that still lets you hear the sound. Side of TV To connect headphones: 1 Connect the headphones to the /AUDIO OUT jack on the side of your TV. 2 In the screen that opens, press W or X to highlight Headphones, then press ENTER. For more information, see “Selecting the audio out mode” on page 43.
NS-24E200NA14 Insignia 24" LED TV Connecting a basic home theater system Using digital audio On your TV Home theater system Digital coaxial audio cable connector Digital coaxial audio jack Digital coaxial audio cable Back of TV To connect a basic home theater system using digital audio: 1 Make sure that your TV’s power adapter is unplugged and the home theater system is turned off.
Insignia 24" LED TV Using analog audio When you connect an analog home theater system, the TV speakers are muted. On your TV Side of TV Home theater system 3.5mm audio cable connector 3.5mm audio cable /AUDIO OUT jack To connect a home theater system using analog audio: 1 Make sure that your TV’s power adapter is unplugged and the home theater system is turned off. 2 Connect a 3.
NS-24E200NA14 Insignia 24" LED TV Connecting a home theater system with multiple devices DVD or Blu-ray player Cable or satellite box AV receiver Game console USB flash drive Antenna or cable TV connected directly to the wall jack Computer The connections you make depend on the video and audio jacks available on your devices. Refer to the documentation that came with your devices for connection information. Just remember to use the best connection types available for the best picture and sound.
Insignia 24" LED TV Connecting power To connect the power: 1 Plug the AC power adapter into the POWER jack on the back of your TV. 2 Plug the other end of the adapter into a power outlet. Cautions • Your TV should only be operated from the power source indicated on the label. • Always unplug the AC power adapter from the power outlet when you will not be using your TV for an extended period of time. www.insigniaproducts.
NS-24E200NA14 Insignia 24" LED TV Using the remote control Cautions • Installing remote control batteries • To install remote control batteries: 1 While pressing the release latch on the back of the remote control, lift the battery compartment cover off the remote control. • Batteries should not be exposed to excessive heat, such as sunshine, heat registers, or fire. Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth.
Insignia 24" LED TV Turning on your TV for the first time The first time you turn on your TV, the Setup Wizard opens. The Setup Wizard guides you through setting up basic settings including the menu language, time setting, picture mode, TV signal source, and the channel list. To set up your TV: 1 Make sure that you have: • Installed the remote control batteries. (See page 34 for details.) • Connected an antenna, cable TV, or satellite TV. (See page 12 through 17 for details.) • Connected the power adapter.
NS-24E200NA14 Insignia 24" LED TV 13 Press S or T to highlight Antenna, Cable, or Satellite Box, then press ENTER. A If you select Antenna, your TV scans for available channels. The scan may take several minutes. B If you select Cable, a message asks if you have a cable box: • Select No, then press ENTER if no cable box is connected. Your TV scans for available channels. The scan may take several minutes. • Select Yes, then press ENTER if a cable box is connected.
Insignia 24" LED TV C If you select Satellite Box, a message asks how you connected the satellite box to your TV: Understanding the basics Turning your TV on or off To turn your TV on or off: 1 Make sure that the power adapter is connected to a power outlet. 2 Press (power) to turn on your TV. The power indicator turns off. 3 Press (power) again to turn off your TV. Your TV enters standby mode, and the power indicator turns red.
NS-24E200NA14 Insignia 24" LED TV On-screen menu overview SETTINGS menu (TV mode) Notes • Depending on the signal source selected, you may see different options on your screen. The following menus are shown in TV mode (except the Photos menu). • Menu items that are not selectable are grayed out. • Menus in this manual are described in TV mode, unless otherwise indicated. • The screens shown in this manual are for explanation purposes and may vary from the actual screens on your TV.
Insignia 24" LED TV Selecting a channel Viewing channel information To select a channel: • Press CH or CH to go to the next or previous channel on the memorized channel list. • Press the number buttons to enter the channel number you want, then wait for the channel to change or press ENTER to immediately change the channel. • To select a digital sub-channel, press the number buttons to select the main digital channel, press (dot), then press the number button for the sub-channel.
NS-24E200NA14 Insignia 24" LED TV Adjusting the picture Adjusting the TV picture You can adjust various settings to improve the quality of the TV picture. Also, you can reset all picture settings to the factory default. To adjust the TV picture: 1 Press MENU. The on-screen menu opens with the PICTURE menu displayed. • Tint—Adjusts the color balance of the picture. Use this control to make skin tones look more natural. • Sharpness—Adjusts the color detail of images.
Insignia 24" LED TV • Overscan—Extends text and images past the screen edges to hide edge artifacts. You can select On or Off. • Dynamic Backlight (DCR)—Enhances the contrast ratio between light and dark areas of the picture. You can select Off, Low, or High. • Color Temperature—Selects the color temperature. You can select Cool (to enhance the blues), Normal, or Warm (to enhance the reds). • Noise Reduction—Selects the noise reduction mode to reduce picture noise (snow).
NS-24E200NA14 Insignia 24" LED TV Adjusting the computer image When you connect a computer to your TV using the VGA jack, you may need to adjust the computer image to improve the quality. Note The Computer Settings option is only available when a computer is connected to the VGA jack on the back of your TV. To adjust the computer image: 1 Make sure that your TV is in VGA mode. For more information, see “Selecting the video input source” on page 37. 2 Press MENU. The on-screen menu opens.
Insignia 24" LED TV • MTS/SAP—(Analog channels only) Selects the audio mode. You can select: • Mono—Select this option if there is noise or static on weak stereo broadcasts. • Stereo—Select this option for programs broadcast in stereo. • SAP—Select this option to listen to a secondary audio program, if available. Note You can also press MTS/SAP one or more times to select the audio mode. • Audio Language—(Digital channels only) Selects an alternate audio language, if available.
NS-24E200NA14 Insignia 24" LED TV Playing TV audio only You can turn off the picture on your TV and listen to the program audio only. To play TV audio only: 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight CHANNELS, then press T or ENTER. The CHANNELS menu opens. Changing channel settings Automatically scanning for channels When you scan for channels, your TV searches for channels with signals and stores the channel information in the channel list.
Insignia 24" LED TV 4 Press S or T to highlight Antenna, Cable, or Satellite Box, then press ENTER. A If you select Antenna, your TV scans for available channels. The scan may take several minutes. • Select Coaxial, then press ENTER if you connected a cable box to your TV using a coaxial cable. Read the message, then press ENTER to start the channel scan (VHF channels only).
NS-24E200NA14 Insignia 24" LED TV Hiding channels Setting up a favorite channel list You can hide channels in the channel list. When you press CH or CH , your TV skips the hidden channels. You can still tune to a hidden channel by pressing the number buttons for the channel. You can create a favorite channel list so you can quickly browse through your favorite channels by pressing FAVORITE, then selecting a channel from the favorite channel list. To hide channels: 1 Press MENU.
Insignia 24" LED TV Adding or changing a channel label Checking the digital signal strength If a channel is not already labeled, you can label the channel to make it easier to identify. You can also relabel a channel that is already labeled. To add or change a channel label: 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight CHANNELS, then press T or ENTER. The CHANNELS menu opens. 3 Press S or T to highlight Channel Labels, then press ENTER.
NS-24E200NA14 Insignia 24" LED TV Setting parental controls 5 Press S or T to highlight Change Password, then press ENTER. The SETTINGS · PARENTAL CONTROLS · CHANGE PASSWORD screen opens. Setting or changing the password Parental controls let you prevent your children from watching inappropriate material on TV. When set, parental controls read the rating of the program (with some exceptions, such as news and sports) and deny access to programs that exceed the ratings level you select.
Insignia 24" LED TV Locking control buttons Blocking unrated TV When the button lock is turned On, the buttons on the side of your TV are locked, and you can only operate your TV using the remote control. To lock control buttons: 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens. 3 Press S or T to highlight Parental Controls, then press ENTER. The Enter password screen opens.
NS-24E200NA14 Insignia 24" LED TV Setting parental control levels You can set parental controls for the U.S. and Canada. U.S. rating levels To set parental control levels: 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens. U.S.
Insignia 24" LED TV 5 Press S or T to highlight USA Parental Locks, then press ENTER. (To set Canadian ratings, select Canadian Parental Locks.) USA Parental Locks Downloading rating information If the program you are viewing has downloadable rating information, you can download the information to use when setting parental controls. Note If the program you are viewing does not have RRT5 rating information, RRT5 is grayed on the SETTINGS · PARENTAL CONTROLS menu and cannot be selected.
NS-24E200NA14 Insignia 24" LED TV 5 Press S or T to highlight RRT5, then press ENTER. The SETTINGS · PARENTAL CONTROLS · RRT5 screen opens. The screen that opens may vary depending on the broadcaster. Using closed captioning Closed captioning displays a text version of the TV program audio or displays information provided by the broadcaster. Turning closed captioning on or off To turn closed captioning on or off: 1 Press MENU. The on-screen menu opens.
Insignia 24" LED TV Selecting the analog closed captioning mode Selecting the digital closed captioning mode Analog channels usually have one or more closed captioning modes. The CC1 mode usually displays a text version of the TV program audio in a small banner. The other CC modes display information provided by the broadcaster. The Text modes display information in a box that covers half of the screen. Digital channels usually have one or more closed captioning modes.
NS-24E200NA14 Insignia 24" LED TV Customizing digital closed captioning settings To customize digital closed captioning styles: 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens. 7 Press S or T to highlight an option, then press ENTER. You can select: • Size—Selects the font size. • Font—Selects the font style. • Text Color—Selects the color for the words. • Text Opacity—Selects the opacity level for the words.
Insignia 24" LED TV Adjusting time settings When you set up your TV for the first time, the clock was set up. If you move your TV to a different time zone, you need to reset the clock to the correct time. Setting the clock To set the clock: 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens. 9 Press S or T to select your time zone, then press ENTER.
NS-24E200NA14 Insignia 24" LED TV Setting the sleep timer You can specify the amount of time before your TV automatically turns off. Adjusting menu settings Selecting the menu language To set the sleep timer: 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens. Your TV can display the on-screen menu in English, French, or Spanish. When you set your TV up for the first time, the language was selected.
Insignia 24" LED TV Labeling an input source Turning Input Sensor on or off You can add a label to an input source to make it easier to identify. To label an input source: 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens. When the Input Sensor feature is turned on, your TV automatically detects which video jacks have devices connected to them.
NS-24E200NA14 Insignia 24" LED TV Using a USB flash drive You can connect a USB flash drive to your TV to view compatible JPEG pictures. Notes • Never remove the USB flash drive or turn off your TV while viewing JPEG pictures. • The JPEG picture viewer only supports JPEG format images (with “.jpg” file extensions) and not all JPEG files are compatible with your TV. 2 Press S or T to highlight Browse Photos, then press ENTER.
Insignia 24" LED TV Viewing favorite photos Viewing photos in a slideshow After you created your favorite photo list, you can browse among your favorite photos quickly. To view favorite photos: 1 Switch to USB mode. See “Switching to USB mode” on page 58. The PHOTOS menu opens. You can view your photos in a slideshow. To view photos in a slideshow: 1 Switch to USB mode. See “Switching to USB mode” on page 58. The PHOTOS menu opens.
NS-24E200NA14 Insignia 24" LED TV Customizing slideshow settings You can customize the slideshow settings, including Repeat, Shuffle, Speed, and Transition. To customize slideshow settings: 1 Switch to USB mode. See “Switching to USB mode” on page 58. The PHOTOS menu opens. Maintaining • Do not use your TV in areas that are too hot or too cold, because the cabinet may warp or the screen may malfunction. Your TV works best in temperatures that are comfortable to you.
Insignia 24" LED TV Troubleshooting Viewing system information You may need to view system information during troubleshooting. Warning Do not try to repair your TV yourself. Contact authorized service personnel. To view system information: 1 Press MENU. The on-screen menu opens. 2 Press W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens.
NS-24E200NA14 Insignia 24" LED TV Problem Dark, poor, or no picture (screen is lit), but sound is good. No color, dark picture, or color is not correct. Only snow (noise) appears on the screen. 62 Solution Problem • Try another channel. The station may be experiencing problems. • Make sure that the antenna or cable TV is connected correctly and securely. See “Connecting a cable or satellite box” on page 12 or “Connecting an antenna or cable TV (no box)” on page 17. • Adjust the brightness.
Insignia 24" LED TV Problem Solution Poor picture. Problem • Make sure that the room is not too bright. Light reflecting off the screen can make the picture difficult to see. • If an S-VHS camera or a camcorder is connected while another connected device is turned on, the picture may be poor. Turn off one or more devices. Good sound, but poor color. • Adjust the contrast, color, and brightness settings. See “Adjusting the TV picture” on page 40. Audio noise.
NS-24E200NA14 Insignia 24" LED TV Problem One or more channels do not display. Password is lost. Specifications Solution • Make sure that the channels are not blocked. See “Setting parental control levels” on page 50. • Make sure that the channels are not hidden. The channel may have been deleted from the channel list. You can tune to the channel by pressing the number buttons or you can add the channel back to the channel list. See “Hiding channels” on page 46.
Insignia 24" LED TV Programming universal remote controls Outputs Video Analog audio/Headphone Digital audio WiFi Ethernet No 1 (side) 1 (coaxial) (back) No No You can operate your Insignia TV with a new or existing universal remote control. Audio Speakers Number: 2 Watts per channel: 2.8W Power Power consumption Power input On: 36W Standby: <1W AC 120V/60Hz Miscellaneous OSD languages INlink Game Mode ENERGY STAR qualified Internet connectable TV base screws V-Chip (version 2.
NS-24E200NA14 Insignia 24" LED TV Common universal remote control codes The following is a list of the most common remote control codes. Codes for other remote controls are available online at: http://www.insigniaproducts.com/remotecodes or check with your cable or satellite TV provider for the remote control code. Legal notices FCC Statement This device complies with Part 15 of the FCC Rules.
Insignia 24" LED TV One-year limited warranty Insignia Televisions Definitions: Insignia Products ("Insignia") warrants to you, the original purchaser of this new Insignia-branded television ("Product"), that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase of the Product ("Warranty Period").
www.insigniaproducts.com (877) 467-4289 Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfield, MN 55423-3645 USA © 2013 BBY Solutions, Inc. All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.
