Owner's Manual

26
NS-32E320A13 Insignia 32" LED TV
www.insigniaproducts.com
• Advanced Audio—Opens the
Audio · Advanced Audio menu where you can
adjust additional audio options.
• Bass—Adjusts the low sounds.
• Treble—Adjusts the high sounds.
• TV Speakers—Selects where to play TV
audio. When you connect headphones to
your TV, audio plays through both the
headphones and the TV speakers. You can
select On (default setting) to play audio
through both the headphones and the TV
speakers, or select Off to turn off the TV
speakers and play audio only through the
headphones.
• Digital Audio/SPDIF—Sends digital audio
to an external audio system. You can select
PCM (to output audio in 2-channel stereo),
or RAW (to pass through the original
digital audio sound).
• MTS/SAP—(Analog channels only) Selects
the audio mode. You can select:
• Mono—Select this option if there is
noise or static on weak stereo
broadcasts.
• Stereo—Select this option for
programs broadcast in stereo.
• SAP—Select this option to listen to a
secondary audio program, if available.
• Audio Language—(Digital channels only)
Selects an alternate audio language, if
available.
• Reset Audio Settings—Reset all audio
settings to factory defaults.
4 Press
W or X to adjust the option, or press S or
T to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Playing TV audio only
You can turn off the picture on your TV and listen to
the program audio only.
To play T V audio only:
1 Press MENU. The on-screen menu opens.
2 Press
W or X to highlight CHANNELS, then press
T or ENTER. The Channels menu opens.
3 Press
S or T to highlight Audio Only, then
press ENTER.
4 Press
S or T to select On.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Note
You can also press MTS/SAP one or
more times to select the audio mode.
Notes
• Audio Only works only when the input source is
TV, and your TV is receiving a broadcast signal.
• To exit audio only mode, press any button.
When you exit audio only mode, the Audio
Only option is automatically reset to Off.