Quick Start Guide

SOUNDBAR
SOUNDBAR
OPTICAL
AUDIO IN
AUDIO IN
L
R
32"
42"
Power/
Input button
Press to turn
your TV on or
o manually.
When your TV is on, a
short press changes
power menu and a
long press turns o
your TV.
QUICK SETUP GUIDE
32"/42" 1080p
NS32F202NA23 / NS42F201NA23
INCLUDED ACCESSORIES
Voice Remote with Alexa
and two AAA batteries
STOP
Before using your new TV, read these
instructions to prevent any damage.
Do not plug the power cord in until all
other devices have been connected.
VESA Mounting Pattern
100 × 100 mm
Screws: type M4, 10 mm to
minimum length depending
on the wall mount
VESA Mounting Pattern
200 × 100 mm
Screws: type M6, 10 mm to
minimum length depending
the wall mount
WALL MOUNT
Before you mount your TV, make sure that:
• You remove the stands.
• The wall-mount bracket supports the weight of your TV.
See the instructions that came with your wall mount
for more information about how to correctly mount your TV.
WARNING: Your TV has four VESA mounting holes on the back.
You must secure a wall-mount bracket to all four holes.
If you do not use all four holes, your TV may fall and cause
property damage or personal injury.
Note: Wall-mount screws are not included.
STANDS
1 Align the TV stand screw
holes with the holes on
your TV’s bottom.
2 Use a Phillips screwdriver
and two of the provided
screws to secure each
stand to your TV.
1
INSTALLING THE STANDS OR A WALL MOUNT
Place your TV face-down on a cushioned, clean surface.
A
U
DI
O
O
PTI
O
N
S
HDMI (best video quality)
AV (good video quality)
You can use the DIGITAL OPTICAL
OUTPUT jack or the HDMI1 (ARC) jack.
Note: If you need to change the digital
audio format, go to the Home menu,
select Settings, then select Display &
Sounds. Select Audio Output, then select
Digital Audio Format and change the
setting to PCM or your preferred audio
format.
Note: You can use a wired Ethernet connection to
access the internet, instead of a Wi-Fi connection.
Plug an Ethernet cable into the ETHERNET jack on
your TV and your Ethernet connection.
ANALOG
DIGITAL
2
Coaxial (good video quality)
ETHERNET (optional)
Connect an antenna to
access live over-the-air TV.
MAKING CONNECTIONS
Note: You can use the
HDMI 1 (ARC) jack to
connect a digital audio
system.
HDMI
O
PTI
O
N
S
TV stands
Self tapping screws
(4 x 12 mm length)
(4 pcs.)
42"
32"
Power indicator
Remote control
sensor
42" TV shown
Note: Images do not necessarily represent the exact design
of your television.
42" TV shown
42"
32"
42" TV shown
LED TV
FEATURES
NS-32F202_42F201NA23_21-1098_QSG_V1_EN_Final.ai 1 1/17/2022 9:20:17 AM