42" Plasma TV | Téléviseur plasma de 42 po | Televisor de Plasma de 42" NS-42PDP
Insignia NS-42PDP 42” Plasma TV Contents Safety information . . . . . . . . . . . . . . . . . . . . . . . . .3 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Setting up your TV . . . . . . . . . . . . . . . . . . . . . . . . .8 Using your TV . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Programming the remote control . . . . . . . . . . . . .21 Maintaining. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Troubleshooting . . . . . . . . . . . . . . . . . . .
Insignia NS-42PDP 42” Plasma TV Servicing Do not attempt to service your TV yourself because opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Replacement parts When replacement parts are required, make sure that the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part.
Insignia NS-42PDP 42” Plasma TV Features Back Front 3 MENU VOL CH 1 2 1 2 SPEAKER AC-INPUT 6 7 4 5 Control Description 1 Power indicator Lights when your TV is turned on. 2 Remote sensor Receives signals from the remote control. 1 Speaker output jacks 3 Control buttons For details, see items 4 through 7. 2 Power connector 4 Power/standby button Press to turn on your TV or to put it into standby mode. 5 MENU Press to open the on-screen menu system.
Insignia NS-42PDP 42” Plasma TV Back jacks S/PDIF 1 2 COMPONENT INPUT 1 3 4 5 6 7 8 COMPONENT INPUT 2 9 10 11 12 13 14 15 16 17 18 19 Connectors 6 1 Speaker output jacks 2 RS232 control interface. This interface is used for service only. You cannot operate your TV from this interface.
Insignia NS-42PDP 42” Plasma TV Remote control Note This remote control is a universal remote control. If it does not seem to work with your TV, press the TV button. Button Description 2 Device buttons TV–Press to select the TV. DVD–Press to select a connected DVD player. CBL–Press to select cable or satellite TV. AUX–Press to select a device assigned to this button. 3 Number buttons Press to enter channel numbers. In the on-screen menu system, press to enter your parental controls password.
Insignia NS-42PDP 42” Plasma TV Button Setting up your TV Description 24 Press to fast-forward on a DVD or CD if a DVD or CD player is connected. 25 Press to skip the next chapter on a DVD or next track on a CD if a DVD or CD player is connected. 26 SLEEP Press to set the sleep timer. For more information, see “Setting the sleep timer” on page 18. 27 CCD Press to turn closed captions on and off. For more information, see “Viewing closed captions” on page 18.
Insignia NS-42PDP 42” Plasma TV Connecting your TV to an electrical outlet To connect your TV to an electrical outlet: 1 Plug the power cord into the power connector on the back of your TV. Connecting an outside antenna Antenna cables come in two types: 75 ohm and 300 ohm. 75 ohm cable 300-ohm cable If your antenna cable has a 75 ohm connector, connect the cable to the coaxial jack on the back of your TV.
Insignia NS-42PDP 42” Plasma TV Connecting cable TV Connecting a sound system Your TV has a 75 ohm jack for connecting cable TV. Some cable TV providers scramble the signals for “premium” (pay) channels. To view these channels you need a converter/descrambler box. If you do not have a converter/descrambler box, you can connect your cable TV directly to your TV. If you have a converter/descrambler box, you can connect your cable TV using an RF switch (not supplied).
Insignia NS-42PDP 42” Plasma TV Connecting a VCR Connecting a VCR (for recording) You can connect a VCR with a standard audio/video cable or with a S-Video cable. The S-Video cable does not carry sound. If you use an S-Video cable, you need to use an audio cable to connect sound. Warning Make sure that you turn off and unplug your TV before installing devices. Use the following illustration to connect a VCR for recording TV programs.
Insignia NS-42PDP 42” Plasma TV Connecting an amplifier Connecting a camcorder Use the following illustration to connect an external amplifier. Back of TV Warning Make sure that you turn off and unplug your TV before installing devices. Use the following illustration to connect a camcorder to your TV. W R W=white (audio left) R=red (audio right R To connect a camcorder: 1 Plug the audio/video cable into the AUDIO L, AUDIO R, and VIDEO jacks ont the back of your TV.
Insignia NS-42PDP 42” Plasma TV Connecting a DVD player Connecting a DTV receiver Warning Make sure that you turn off and unplug your TV before installing devices. Warning Make sure that you turn off and unplug your TV before installing devices. Use the following illustration to connect a DVD player to your TV. To connect a DVD player: • Plug the HDMI cable into the HDMI jack on the back of your TV and to the HDMI out jack on the back of the DVD player.
Insignia NS-42PDP 42” Plasma TV Using your TV Connecting a computer Warning Make sure that you turn off and unplug your TV before installing devices. Use the following illustration to connect a computer to your TV. Back of TV Turning your TV on and off To turn on your TV: 1 Make sure that the power cord is connected to your TV and an electrical outlet. 2 Press the button to turn on your TV.
Insignia NS-42PDP 42” Plasma TV Automatically setting up channels 3 Press the or button one or more times to highlight Manual Ch Set. To automatically set up the channel list: 1 Press the MENU button. 2 Press the or button one or more times to highlight Setup, then press the OK or button to open the Setup menu. 3 Press the or button one or more times to highlight Auto Ch Search. 4 Press the OK or button to access the Manual Ch Set options.
Insignia NS-42PDP 42” Plasma TV Selecting the video input source Adding a channel label To select the video input source: • Press the INPUT button one or more times to select the video source. You can select: • TV–TV signal • Composite1–AV INPUT1 jacks • Composite2–AV INPUT2 jacks • Component1–COMPONENT INPUT1 jacks • Component2–COMPONENT INPUT2 jacks • VGA–D-SUB jack (computer) • HDMI–HDMI jack • S-Video–S-Video jack To add a label to a channel: 1 Press the MENU button.
Insignia NS-42PDP 42” Plasma TV Manually setting the clock Setting the clock You can automatically set the clock from a digital channel signal. Your TV searches for a digital channel that has time information encoded. If the clock is not correct after you automatically set it, you can manually set the clock. Automatically setting the clock To manually set the clock: 1 Press the MENU button.
Insignia NS-42PDP 42” Plasma TV Setting the sleep timer The sleep timer lets you select the amount of time before your TV turns off automatically. 3 Press the or button one or more times to highlight CC Options. To set the sleep timer: 1 Press the MENU button. 2 Press the or button one or more times to highlight Feature, then press the OK or button to open the Feature menu. 4 Press the OK or button to open the Digital Closed Caption menu.
Insignia NS-42PDP 42” Plasma TV 3 Press the or button one or more times to highlight CC when Mute. 5 Press the number buttons to enter the old password. If you have not set a password, enter 0000. The Enter New Password screen opens. 6 Press the number buttons to enter a new password, then enter the new password again to confirm. 4 Press the OK or button to select On or Off. Setting parental controls Your TV has a V-chip that lets you control the type of programs your children can watch.
Insignia NS-42PDP 42” Plasma TV To set the ratings: 1 Press the MENU button. 2 Press the or button one or more times to highlight Feature, then press the OK or button to open the Feature menu. 3 Press the or button one or more times to highlight Parental Control, then press the OK or button to open the Parental Control menu. Selecting the on-screen menu language To select the on-screen menu language: 1 Press the MENU button.
Insignia NS-42PDP 42” Plasma TV On-screen menus On-screen menu Video Note: Options may vary in different modes. Audio Note: Options may vary in different modes. On-screen menu Options Picture Mode–Selects the picture mode: User, Nature, Soft, or Bright. You can also press the PICTURE button to select the picture mode. Contrast–Increases the picture level to adjust the white areas of the picture. Decreases the picture level to adjust the black areas of the picture.
Insignia NS-42PDP 42” Plasma TV 4 Press and hold the SET button on the remote control until the LED blinks twice, then release the button. 5 Enter the first five-digit code for your device. The LED blinks once as each digit is entered. If the code is correct, the LED blinks twice. Note If the LED does not blink twice, repeat steps 3 through 5 using a different code. 6 Aim the remote at the device, then press the button.The device should turn off.
Insignia NS-42PDP 42” Plasma TV Cleaning your TV Symptom Clean the screen and cabinet with a soft, lint-free cloth. If the screen or cabinet is especially dirty, moisten a soft, lint-free cloth in a weak detergent solution, squeeze the excess moisture from the cloth, then wipe the screen or cabinet with the cloth. Use a clean cloth to dry the screen or cabinet. Caution Avoid volatile substances, such as insect sprays, solvents, and thinners.
Insignia NS-42PDP 42” Plasma TV Specifications • Daewoo Design and specifications are subject to change without notice. Weight and dimensions listed are approximate.
Insignia NS-42PDP 42” Plasma TV Mitsubishi 20067, 20043 Tatung 20045, 20067 Motorola 20035, 20048 Technics 20035, 20162 MTC 20240 Teco 20035, 20037, 20048, 20038 Multitech 20072 Teknika 20035, 20037 NEC 20035, 20037, 20048, 20104,20067, 20038 Tivo 20636, 20618, 21503, 20739 Newave 20037 Nikko 20037 Noblex Northgate TMK 20240 Toshiba 20045, 20042, 20067, 20043,21503, 21008, 21972 20240 Totevision 20037, 20240 21972 Touch 21972 Olympus 20035 Unitech 20240 Optimus 21062,
Insignia NS-42PDP 42” Plasma TV Harman/Kardon 26 20582, 20702 Technics 20490 Hitachi 20573, 20664, 21919 Theta Digital 20571 Hiteker 20672 Toshiba 20503, 20695 Initial 20717 Urban Concepts 20503 Integra 20627, 21924 Xbox 20522 JBL 20702 Yamaha 20490, 20539, 20545 JVC 20558, 20623, 20867 Zenith 20503, 20591, 20869 Kenwood 20490, 20534 KLH 20717, 21020, 21149 Koss 20651, 21980 ABC 00003, 00008, 00014 Lasonic 20798 Americast 00899 LG 20591, 20869, 20801 Bell & Howell
Insignia NS-42PDP 42” Plasma TV Toshiba 00000 Copyright Trans PX 00276 Tristar 00883 TS 00003 V2 00883 Viewmaster 00883 © 2006 Insignia. Insignia and the Insignia logo are trademarks of Best Buy Enterprise Services, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. Specifications and features are subject to change without notice or obligation.
Insignia NS-42PDP 42” Plasma TV 28 www.insignia-products.
Insignia NS-42PDP 42” Plasma TV 1 Year Limited Warranty Insignia Products (“Insignia”) warrants to you, the original purchaser of this new NS-42PDP (“Product”), that the Product shall be free of defects in the original manufacture of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”). This Product must be purchased from an authorized dealer of Insignia brand products and packaged with this warranty statement.
Insignia NS-42PDP 42” Plasma TV 30 www.insignia-products.
Téléviseur Insignia NS-42PDP à écran plasma de 42 po Téléviseur Insignia NS-42PDP à écran plasma de 42 po Table des matières Informations sur la sécurité . . . . . . . . . . . . . . . . .31 Fonctionnalités. . . . . . . . . . . . . . . . . . . . . . . . . . .33 Installation du téléviseur . . . . . . . . . . . . . . . . . . .36 Fonctionnement du téléviseur . . . . . . . . . . . . . . .42 Programmation de la télécommande . . . . . . . . . .50 Entretien. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Téléviseur Insignia NS-42PDP à écran plasma de 42 po Support Ne pas placer cet appareil sur une table roulante, un pied, un trépied, un support ou une table instables. L’appareil pourrait tomber et provoquer dans sa chute des blessures et subir de graves dommages. N’utiliser qu’avec la table roulante, le pied, le trépied, le support ou la table recommandés par le fabricant ou vendus avec le téléviseur.
Téléviseur Insignia NS-42PDP à écran plasma de 42 po Mise à la terre d’une antenne externe Si cet appareil est connecté à une antenne extérieure ou à un réseau câblé, vérifier que l'antenne ou la connexion au réseau câblé est mis à la terre afin de bénéficier d'une certaine protection contre les sautes de tension et les charges électrostatiques.
Téléviseur Insignia NS-42PDP à écran plasma de 42 po Prises arrière S/PDIF 1 2 COMPONENT INPUT 1 3 4 5 6 7 8 COMPONENT INPUT 2 9 10 11 12 13 14 15 16 17 18 19 Connecteurs 34 1 Prises de sortie pour haut-parleurs 2 Interface de commande RS232. Cette interface n’est utilisée que pour la maintenance. Il n’est pas possible de faire fonctionner l’appareil à partir de cette interface.
Téléviseur Insignia NS-42PDP à écran plasma de 42 po Utilisation de la télécommande Télécommande Remarque Cette télécommande est une télécommande universelle. Si elle ne semble pas fonctionner avec le téléviseur, appuyer sur la touche TV. Remarque Pour toute information sur la programmation de la télécommande, voir « Programmation de la télécommande » page 50. Touche Description 1 CONFIGURER Permet de programmer la télécommande.
Téléviseur Insignia NS-42PDP à écran plasma de 42 po Le schéma ci-après illustre la portée de la télécommande. Touche Description 17 DEL S’allume lors de la programmation de la télécommande. Pour des informations complémentaires, voir « Programmation de la télécommande » page 50. 18 — Permet de sélectionner un canal secondaire. Pour des informations complémentaires, voir « Sélection d’un canal secondaire numérique » page 43. 19 + VOL - Permet de régler le volume.
Téléviseur Insignia NS-42PDP à écran plasma de 42 po Connexion des haut-parleurs 3 Remettre le couvercle en place. Pour connecter des haut-parleurs à l’appareil : 1 Débrancher le cordon d’alimentation de l’appareil ainsi que tous les périphériques connectés à ce dernier. 2 Connecter les haut-parleurs aux prises pour haut-parleurs situées au dos de l’appareil.
Téléviseur Insignia NS-42PDP à écran plasma de 42 po Utiliser l’illustration ci-après pour connecter une antenne extérieure. ANTENNE COMBINÉE Antenne VHF / UHF Antenne VHF / UHF OU Câble de 75 ohms Câble de 300 ohms avec adaptateur ANTENNES SÉPARÉES Pour le raccordement à la TV câblée avec un décodeur/décrypteur : • Se référer au schéma ci-après pour la connexion d’un décodeur/décrypteur (l’interrupteur RF et le répartiteur de signal ne sont pas fournis).
Téléviseur Insignia NS-42PDP à écran plasma de 42 po Connexion d’un magnétoscope Il est possible de connecter un magnétoscope avec un câble audio/vidéo standard ou un câble S-Vidéo. Le câble S-Vidéo ne fournit pas de son. Si un câble S-Vidéo est utilisé, un câble audio est nécessaire pour la connexion du son. Remarque Pour obtenir une meilleure vidéo, utiliser la prise S-Vidéo si le magnétoscope est doté d’une connexion S-vidéo.
Téléviseur Insignia NS-42PDP à écran plasma de 42 po Connexion d’un amplificateur Connexion d’un caméscope Se référer au schéma ci-après pour la connexion d’un amplificateur externe. Panneau arrière du téléviseur Avertissement S’assurer d’éteindre et de débrancher l’appareil avant l’installation de périphériques. Se référer au schéma ci-après pour la connexion d’un caméscope au téléviseur.
Téléviseur Insignia NS-42PDP à écran plasma de 42 po Connexion d’un lecteur de DVD Connexion d’un récepteur TVN Avertissement S’assurer d’éteindre et de débrancher l’appareil avant l’installation de périphériques. Se référer au schéma ci-après pour la connexion du lecteur de DVD à l’appareil. Connexion d’un lecteur de DVD : • Brancher le câble HDMI sur la prise HDMI au dos de l’appareil et sur la prise de sortie HDMI sur le panneau arrière du lecteur de DVD.
Téléviseur Insignia NS-42PDP à écran plasma de 42 po Connexion d’un ordinateur Avertissement S’assurer d’éteindre et de débrancher l’appareil avant l’installation de périphériques. Se référer au schéma ci-après pour la connexion d'un ordinateur à l'appareil. Panneau arrière du téléviseur Fonctionnement du téléviseur Mise en Marche/Arrêt de l’appareil Pour mettre l'appareil en marche : 1 Vérifier que le cordon d’alimentation est connecté à l’appareil et à une prise secteur.
Téléviseur Insignia NS-42PDP à écran plasma de 42 po Configuration automatique des canaux Pour configurer la liste des canaux automatiquement : 1 Appuyer sur MENU. 2 Appuyer une ou plusieurs fois sur ou pour sélectionner Setup (Configuration), puis sur OK ou pour ouvrir le menu de configuration. 3 Appuyer une ou plusieurs fois sur ou pour sélectionner Auto Ch Search (Recherche automatique des canaux).
Téléviseur Insignia NS-42PDP à écran plasma de 42 po Réglage du volume 3 Appuyer une ou plusieurs fois sur ou pour sélectionner DTV Signal (Signal TVN). Pour régler le volume : • Appuyer sur la touche VOL ou à l’avant de l’appareil ou sur la touche VOL – ou + de la télécommande pour diminuer ou augmenter le volume. • Appuyer sur MUTE (Sourdine) pour désactiver le son. Appuyer de nouveau sur MUTE (Sourdine) pour réactiver le son.
Téléviseur Insignia NS-42PDP à écran plasma de 42 po Réglage manuel de l’horloge Arrêt sur image Il est possible de faire un arrêt sur image (figer l’image). Avertissement Pour éviter d’endommager l’appareil, ne pas faire un arrêt sur image pendant une durée prolongée. Pour faire un arrêt sur image ou réactiver l'image : • Appuyer sur FREEZE (Arrêt sur image). Pour régler l’horloge manuellement : 1 Appuyer sur MENU.
Téléviseur Insignia NS-42PDP à écran plasma de 42 po Réglage de l’arrêt différé L’arrêt différé permet de sélectionner la durée avant que l’appareil se mette automatiquement hors tension. Pour régler l'arrêt différé : 1 Appuyer sur MENU. 2 Appuyer une ou plusieurs fois sur ou pour sélectionner Feature (Fonctionnalités), puis sur OK ou pour ouvrir le menu des fonctionnalités.
Téléviseur Insignia NS-42PDP à écran plasma de 42 po • • • Background Opacity–Permet de choisir la transparence de l'arrière plan. Edge Effect–Permet de choisir un effet de bordure. Edge Color–Permet de choisir une couleur pour les bordures. Pour configurer un mot de passe : 1 Appuyer sur MENU. 2 Appuyer une ou plusieurs fois sur ou pour sélectionner Feature (Fonctionnalités), puis sur OK ou pour ouvrir le menu des fonctionnalités.
Téléviseur Insignia NS-42PDP à écran plasma de 42 po Classification MPAA Classification Description AUCUNE Non classifié. 3 Appuyer une ou plusieurs fois sur ou pour sélectionner Parental Control (Contrôle parental), puis sur OK ou pour ouvrir le menu de contrôle parental. G Tout public. PG Surveillance parentale suggérée. Certains aspects peuvent ne pas convenir à des enfants. PG -13 Surveillance parentale fortement suggérée.
Téléviseur Insignia NS-42PDP à écran plasma de 42 po 3 Appuyer une ou plusieurs fois sur ou pour sélectionner Parental Control Set (Configuration du contrôle parental), puis sur OK ou pour sélectionner la langue souhaitée. 4 Appuyer sur EXIT (Quitter) pour fermer le menu d'écran. Utilisation du système de menus d’écrans L’appareil est doté d’un système de menus d’écrans qui permet de régler les paramètres du téléviseur, tels que l’image vidéo et le son.
Téléviseur Insignia NS-42PDP à écran plasma de 42 po Menu d’écran Options Menu d’écran Options Audio Remarque : Les options varient en fonction des différents modes d’entrée sortie. Sound Mode (Mode sonore) – Sélectionne le mode sonore : User (Utilisateur), News (Nouvelles), Music (Musique) ou Movie (Film). Il est aussi possible d’appuyer sur AUDIO pour sélectionner le mode sonore. Bass (Graves) – Règle les graves (notes basses). Treble (Aigus) – Règle les aigus (notes puissantes).
Téléviseur Insignia NS-42PDP à écran plasma de 42 po 5 Saisir le code à cinq chiffres du périphérique. Le témoin DEL clignote chaque fois qu’un chiffre est saisi. Si le code est correct, le témoin DEL clignote deux fois. Remarque Si le témoin DEL de clignote pas deux fois, répéter les étapes 3 à 5 en essayant un code différent. 6 Pointer la télécommande vers le périphérique, puis appuyer sur . Le périphérique devrait s’éteindre.
Téléviseur Insignia NS-42PDP à écran plasma de 42 po Anomalie Solution possible Anomalie La télécommande ne Vérifier que le périphérique est doté contrôle pas un d'un capteur de télécommande, puis périphérique ou ne essayer un autre code. commande que certaines fonctionnalités de celui-ci Pas de volume sur le périphérique Voir « Programmation du verrouillage de volume » page 51. Entretien • Bonne image mais pas de son • Augmenter le volume. • Vérifier que le son n’est pas mis en sourdine.
Téléviseur Insignia NS-42PDP à écran plasma de 42 po Anomalie Solution possible Image rémanente • Ne pas afficher une image fixe telle qu’un logo, un jeu, une image d’ordinateur, pendant une période prolongée. Ceci peut provoquer l’incrustation d’une image rémanente sur l’écran. Ces dommages ne sont pas couverts par la garantie. Le téléviseur émet des craquements • Les craquements se produisent quand le châssis du téléviseur se dilate ou se contracte sous l’effet de variations de températures.
Téléviseur Insignia NS-42PDP à écran plasma de 42 po Marantz 20035, 20081 Sharp Marta 20037 Shintom 20072 Matsushita 20035, 20162 Shogun 20240 Media Center PC 21972 Singer 20072 MEI 20035 Sonic Blue 20616 Memorex 20035, 20162, 20037, 20048,20039, 20047, 20240, 20104, 20209, 20479 Sony 20035, 20032, 20033, 20636,21972 STS 20042 MGA 20240, 20043 MGN Technology 20240 Microsoft 21972 Mind 21972 Minolta 20042 Mitsubishi 20067, 20043 Motorola 20035, 20048 MTC 20240 Multite
Téléviseur Insignia NS-42PDP à écran plasma de 42 po Denon 20490 Sharper Image 21117 DVD2000 20521 Sherwood 20770 Emerson 20591, 20675 Shinco 20717 Entreprise 20591 Shinsonic 20533 Fisher 21919 Sonic Blue 20869, 21099 Funai 20675 Sony 20533, 20864, 21033, 21904, 21903 Gateway 2000 21158, 21073 SVA 20717 GE 20522, 20717 Sylvania 20675 Go Video 20744, 20833, 21099, 20783,21075, 20869, 21730 Symphonic 20675 Teac 20717, 21984, 20809 Greenhill 20717 Technics 20490 Harman
Téléviseur Insignia NS-42PDP à écran plasma de 42 po Regal 00279, 00273 Droits d’auteurs Runco 00000 Samsung 00000, 00144 © 2006 Insignia. Insignia et le logo Insignia sont des marques de commerce de Best Buy Enterprise Services, Inc. Les autres noms de marques et de produits mentionnés sont des marques de commerce ou des marques déposées de leurs propriétaires respectifs. Les spécifications et caractéristiques sont susceptibles d’être modifiées sans préavis.
Téléviseur Insignia NS-42PDP à écran plasma de 42 po • les produits dont le numéro de série usine a été Garantie limitée d’un an altéré ou enlevé du Produit. Insignia Products (“Insignia”) garantit au premier acheteur de ce NS-42PDP neuf (“Produit”), qu’il est exempt de vices de fabrication et de main-d’œuvre à l’origine, pour une période d’un (1) an à partir de la date d’achat du Produit (“Période de garantie”).
Téléviseur Insignia NS-42PDP à écran plasma de 42 po 58 www.insignia-products.
Televisor de Plasma de 42" NS-42PDP de Insignia Televisor de Plasma de 42" NS-42PDP de Insignia Contenido Información de seguridad . . . . . . . . . . . . . . . . . .59 Características . . . . . . . . . . . . . . . . . . . . . . . . . . .61 Preparación de su TV . . . . . . . . . . . . . . . . . . . . .64 Uso del TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 Programación del control remoto. . . . . . . . . . . . .79 Mantenimiento . . . . . . . . . . . . . . . . . . . . . . . . . . .
Televisor de Plasma de 42" NS-42PDP de Insignia Soporte No coloque su TV en un carro, base, trípode, soporte o mesa inestable. Su TV se podría caer y sufrir daños importantes, además de causar serias lesiones personales. Usar solamente con carros, bases, trípodes, soportes, o mesas especificadas por el fabricante o que se vendan con el televisor. Si monta su TV en la pared, siga las instrucciones del fabricante y use un accesorio de montaje recomendado por el fabricante.
Televisor de Plasma de 42" NS-42PDP de Insignia Conexión a tierra de la antena exterior Sí una antena externa o un sistema de cable esta conectado al TV, asegúrese de que la antena o el sistema de cable esta conectado a tierra, para proveer una protección contra sobre voltajes y la acumulación de cargas estáticas. El artículo 810 del código nacional eléctrico, ANSI/NFPA No.
Televisor de Plasma de 42" NS-42PDP de Insignia Conectores posteriores S/PDIF 1 2 COMPONENT INPUT 1 3 4 5 6 7 8 COMPONENT INPUT 2 9 10 11 12 13 14 15 16 17 18 19 Conectores 62 1 Conectores de salida de altavoces 2 Interfaz de control RS232. Esta interfaz se usa solamente para reparaciones. No puede operar su TV con está interfaz.
Televisor de Plasma de 42" NS-42PDP de Insignia Control remoto Nota Este control remoto es universal. Si pareciera que el control remoto no funciona con su televisor, presione el botón TV. Botón Descripción 2 Botones de dispositivos TV–Presione para seleccionar el TV. DVD–Presione para seleccionar un reproductor de DVD conectado. CBL–Presione para seleccionar TV por cable o satélite. AUX–Presione para seleccionar un dispositivo asignado a este botón.
Televisor de Plasma de 42" NS-42PDP de Insignia La siguiente figura muestra el rango del control remoto. Botón Descripción 20 INFO Permite de mostrar información del estado. 21 SALIR Permite de cerrar el sistema de menú de pantalla. 22 Permite de comenzar a reproducir un DVD o CD si un reproductor de DVD o de CD está conectado. 23 Permite de dejar de reproducir un DVD o CD si un reproductor de DVD o de CD está conectado.
Televisor de Plasma de 42" NS-42PDP de Insignia Conexión de altavoces 3 Vuelva a colocar la cubierta. Para conectar altavoces a su TV: 1 Desconecte el cable de alimentación del TV y todos los dispositivos que estén conectados a su TV. 2 Conecte los altavoces a los conectores de altavoces en la parte posterior de su TV. Verifique que conecte la parte negra del cable de altavoz en el conector – y la parte roja en el conector + en la parte posterior de su TV.
Televisor de Plasma de 42" NS-42PDP de Insignia Refiérase a la siguiente figura para conectar una antena exterior. ANTENA COMBINADA Antena de VHF/UHF Antena de VHF/UHF O Cable de 75 ohmios Cable de 300 ohmios con adaptador ANTENAS SEPARADAS Para conectar TV por cable con una caja conversora/decodificadora: • Refiérase a la siguiente figura para conectar una caja conversora/decodificadora. (El conmutador de RF y el divisor de señal no se suministran.
Televisor de Plasma de 42" NS-42PDP de Insignia Conexión de un VCR Conexión de un VCR (para grabar) Puede conectar un VCR con un cable de audio/video estándar o con un cable de S-Video. El cable de S-Video no incluye el sonido. Si usa un cable de S-Video, necesitará usar un cable de audio para conectar el sonido. Advertencia Verifique que apague y desconecte su TV antes de instalar dispositivos. Refiérase a la siguiente figura para conectar un VCR para grabar programas de TV.
Televisor de Plasma de 42" NS-42PDP de Insignia Conexión de un amplificador Conexión de una cámara de video Refiérase a la siguiente figura para conectar un amplificador externo. Parte posterior del televisor Advertencia Verifique que apague y desconecte su TV antes de instalar dispositivos. Refiérase a la siguiente figura para conectar una cámara de video a su TV.
Televisor de Plasma de 42" NS-42PDP de Insignia Conexión de un reproductor de DVD Advertencia Verifique que apague y desconecte su TV antes de instalar dispositivos. Refiérase a la siguiente figura para conectar un reproductor de DVD a su TV. Para conectar un reproductor de DVD: • Conecte el cable HDMI en el conector HDMI en la parte posterior de su TV y al conector de salida HDMI en la parte posterior del reproductor de DVD.
Televisor de Plasma de 42" NS-42PDP de Insignia Uso del TV Conexión de una computadora Advertencia Verifique que apague y desconecte su TV antes de instalar dispositivos. Refiérase a la siguiente figura para conectar una computadora a su TV. Parte posterior del TV Cómo encender y apagar el TV Para encender su TV: 1 Verifique que el cable de alimentación está conectado a su TV y a un tomacorriente eléctrico. 2 Presione el botón para encender su TV. 3 Presione el botón de nuevo para apagar su TV.
Televisor de Plasma de 42" NS-42PDP de Insignia Configuración automática de canales Para configurar automáticamente la lista de canales: 1 Presione el botón MENU (Menú). 2 Presione el botón o una o más veces para resaltar Setup (Configuración), luego presione el botón OK (Aceptar) o para abrir el menú de configuración. 3 Presione el botón o una o más veces para resaltar Auto Ch Search (Búsqueda Automática de Canales).
Televisor de Plasma de 42" NS-42PDP de Insignia Ajuste del volumen 3 Presione el botón o una o más veces para resaltar DTV Signal (Señal de DTV). Para ajustar el volumen: • Presione el botón VOL o en el frente de su TV o el botón VOL – o + en el control remoto para bajar o subir el volumen. • Presione el botón MUTE para desactivar el sonido. Presione el botón MUTE (Silenciar) de nuevo para reactivar el sonido.
Televisor de Plasma de 42" NS-42PDP de Insignia 4 Presione el botón o para mover la selección o el cursor. Presione el botón o para alternar entre NTSC o ATSC o para seleccionar el número de canal o carácter. 5 Presione el botón OK (Aceptar) para regresar al menú anterior, o presione el botón EXIT (Salir) para ocultar el sistema de menú. Congelamiento de la imagen Puede congelar (detener) la imagen en la pantalla.
Televisor de Plasma de 42" NS-42PDP de Insignia Ajuste del temporizador de apagado automático El temporizador de apagado automático le permite seleccionar la cantidad de tiempo que transcurrirá antes de que su TV se apague automáticamente. Para ajustar el temporizador de apagado automático: 1 Presione el botón MENU (Menú). 2 Presione el botón o una o más veces para resaltar Feature (Función), luego presione el botón OK (Aceptar) o para abrir el menú de funciones.
Televisor de Plasma de 42" NS-42PDP de Insignia • • Edge Effect– Para seleccionar un efecto de borde. Edge Color–Para seleccionar un color para los bordes. Visualización de subtítulos optativos cuando se silencia el volumen Para establecer una contraseña: 1 Presione el botón MENU (Menú). 2 Presione el botón o una o más veces para resaltar Feature (Función), luego presione el botón OK (Aceptar) o para abrir el menú de funciones.
Televisor de Plasma de 42" NS-42PDP de Insignia Clasificaciones MPAA 3 Presione el botón o una o más veces para resaltar Parental Control (Control Paterno), luego presione el botón OK (Aceptar) o para abrir el menú de control paterno. Clasificación Descripción NONE (Ninguna) Sin clasificación. G Apto para todo público. PG Se sugiere el control de los padres. Contiene material que los padres pueden considerar inadecuado para los niños. PG-13 Se recomienda fuertemente la supervisión de los padres.
Televisor de Plasma de 42" NS-42PDP de Insignia 3 Presione o una o más veces para resaltar Parental Control Set (Ajuste del Control de los Padres), y luego presione OK (Aceptar) o para seleccionar el idioma deseado. 4 Presione EXIT (Salir) para cerrar el sistema de menú de pantalla. Uso del sistema de menú de pantalla Su TV tiene un sistema de menú de pantalla que le permite ajustar los controles del TV, tal cómo los ajustes de video y audio.
Televisor de Plasma de 42" NS-42PDP de Insignia Menú de pantalla Menú de pantalla Opciones Audio Nota: Las opciones pueden variar en los diferentes modos de entrada/salida. Sound Mode (Modo de Sonido) –Selecciona el modo de sonido: User (Usuario), News (Noticias), Music (Música), o Movie (Película). También puede presionar el botón AUDIO para seleccionar el modo de sonido. Bass (Graves) – Ajusta los sonidos graves. Treble (Agudos) – Ajusta los sonidos agudos.
Televisor de Plasma de 42" NS-42PDP de Insignia Programación del control remoto Programación de un equipo conectado a su TV El control remoto puede controlar cuatro dispositivos, tal cómo un VCR, un reproductor de DVD, un receptor de cable o satélite, un amplificador o sintonizador, o un equipo similar. Para programar el control remoto: 1 Encuentre el código para el dispositivo que desea programar. Refiérase a “Appendix” en la página 81.
Televisor de Plasma de 42" NS-42PDP de Insignia Para desbloquear el control de volumen de un solo equipo: 1 Presione el botón del equipo. 2 Mantenga presionado el botón SET (Establecer) hasta que el indicador LED parpadee dos veces, luego suelte el botón. 3 Ingrese 993, luego presione el botón VOL–. El indicador LED parpadeará cuatro veces. El control de volumen para el equipo que ha seleccionado estará desbloqueado.
Televisor de Plasma de 42" NS-42PDP de Insignia Síntoma Solución probable Los botones de control no funcionan • Desconecte el cable de alimentación por unos segundos y luego reconecte el cable de nuevo y encienda su TV. Algunas partes de la pantalla no se iluminan • La pantalla de plasma se fabrica usando una tecnología de precisión de alto nivel. Elementos de la imagen pueden faltar de unas partes de la imagen o pueden encontrarse puntos luminosos. Esto no es un mal funcionamiento.
Televisor de Plasma de 42" NS-42PDP de Insignia 82 KEC 20037, 20278 Realistic 20035, 20037, 20048, 20047,20104 Kenwood 20067, 20038 ReplayTV 20616 KLH 20072 Runco 20039 Kodak 20035, 20037 Sampo 20037, 20048 Kolin 20043 LG 20037, 20045, 20042, 20209,20038 Samsung 20240, 20045, 20432 Logik 20072 LXI 20037 Magnavox 20035, 20039, 20081 Magnin 20240 Marantz 20035, 20081 Marta 20037 Matsushita 20035, 20162 Media Center PC 21972 MEI 20035 Memorex 20035, 20162, 20037, 20048,
Televisor de Plasma de 42" NS-42PDP de Insignia Apex Digital 20672, 20717, 20797, 21061,20796, 21056, 21937, 20794, 21020, 21915 Portland 20770 Blaupunkt 20717 Proscan 20522 Qwestar Blue Parade 20571 20651 Broksonic 20695 RCA 20522, 20571, 20717, 20822 Rio Changhong 20627, 21061 20869 CineVision 20869 Coby 21086 Curtis Mathes 21087 CyberHome 21024, 21023, 21129, 20816, 21117 Daewoo 20833, 21172, 20869 Denon 20490 DVD2000 20521 Emerson 20591, 20675 Enterprise 20591 Fishe
Televisor de Plasma de 42" NS-42PDP de Insignia Motorola 00476, 00810, 00276, 01254,01376 MultiVision 00012 Pace 01877, 00237 Panasonic 00000, 00008, 00107 Panther 00637 Paragon 00000 Philips 00317, 01305 Pioneer 01877, 00877, 00144, 00533 Pulsar 00000 Quasar 00000 RadioShack 00883 Regal 00279, 00273 Runco 00000 Samsung 00000, 00144 Scientific Atlanta 01877, 00877, 00477, 00008 Sony 01006 Starcom 00003, 00014 Supercable 00276 Supermax 00883 Tocom 00012 Torx 00003 To
Televisor de Plasma de 42" NS-42PDP de Insignia • Productos en los cuales el número de serie Garantía Limitada de 1 Año asignado en la fábrica ha sido alterado o removido. Insignia Products (“Insignia”) le garantiza a usted, el comprador original de este nuevo NS-42PDP (“Producto”), que éste se encontrará libre de defectos de material o de mano de obra en su fabricación original por un periodo de un (1) año a partir de la fecha de compra del Producto (“Período de Garantía”).
Televisor de Plasma de 42" NS-42PDP de Insignia 86 www.insignia-products.