User Manual
Table Of Contents
- CHILD SAFETY
- IMPORTANT SAFEGUARDS
- Introduction
- TV components
- Connecting a cable or satellite box
- Connecting an antenna or cable TV (no box)
- Connecting a DVD or Blu-ray player
- Connecting a game console
- Connecting a computer
- Connecting to Ethernet
- Connecting a USB flash drive
- Connecting headphones
- Connecting external speakers or a sound bar
- Connecting power
- Programming a universal remote control
- Setting up your TV
- Using your TV
- Maintaining
- Troubleshooting
- Legal notices
- ONE-YEAR LIMITED WARRANTY
17
www.insigniaproducts.com
LED TV
Connecting external speakers or a sound bar
You can connect external speakers or a sound bar using:
• Digital audio using the digital optical audio jack
• Digital audio using the HDMI/ARC jack
• Analog audio
Digital audio using the digital optical audio jack
1 Make sure that your TV’s power cord is unplugged and the digital speaker system or sound bar is turned off.
2 Connect a digital optical audio cable (not provided) to the digital output jack on your TV and to the audio in jack on the
digital speaker system or sound bar.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the digital speaker system or sound bar, then set it to the correct source. See the documentation that came with
the digital speaker system or sound bar.
5 If you need to change the digital audio format, go to the Home menu, select Settings, then select Display & Sounds.
Select Audio Output, then select Digital Audio Format and change the setting to PCM or Dolby Digital.
6 If you want to turn off your TV speakers, go the Home menu, select Settings, then select Display & Sounds. Select Audio
Output, then select TV Speakers and change the setting to OFF.
Note: Depending on the audio device you are connecting, you may need to change the digital audio format for your TV. The default setting
is Auto.
Digital speaker system
Sound bar
Digital optical audio cable
Digital optical
audio jack