Quick Start Guide

AUDIO/VIDEO OUT
OPTICAL
AUDIO IN
H
DMI
O
PTI
O
N
S
SOUNDBAR
SOUNDBAR
STANDS
1 Align the TV stand screw holes
with the holes on your
TV's bottom.
2 Use a Phillips screwdriver and
two provided screws to secure
each stand to your TV.
WALL MOUNT
Before you mount your TV, make sure that:
• You remove the stands.
• The wall-mount bracket supports the weight of your TV.
See the instructions that came with your wall mount
for more information about how to correctly mount your TV.
WARNING: Your TV has four VESA mounting holes on the back.
You must secure a wall-mount bracket to all four holes.
If you do not use all four holes, your TV may fall and cause
property damage or personal injury.
Note: Wall-mount screws are not included.
HDMI (best video quality)
Note: You can use the
HDMI 1 (ARC) jack to
connect a digital
audio system.
AV (good video quality)
AUDIO
OUT
DIGITAL
OPTICAL
OUTPUT
You can use the DIGITAL OPTICAL
OUTPUT
jack or the HDMI1
(ARC) jack.
Note: If you need to change the
digital audio format, go to the
Home menu, select Settings, then
select Display & Sounds. Select
Audio Output, then select Digital
Audio Format and change the
setting to PCM or Dolby Digital.
Note: You can use a wired Ethernet connection to
access the internet instead of a WiFi connection.
Plug an Ethernet cable into the ETHERNET jack on
your TV and your Ethernet connection.
A
U
DI
O
O
PTI
O
N
S
VESA Mounting Pattern
400 x 300 mm
Screws: type M6, 12 mm to
14 mm length depending on the wall mount
1
AUDIO IN
L
R
ANALOG
INSTALLING THE STANDS OR A WALL MOUNT
Place your TV face-down on a cushioned, clean surface.
Note: Images do not necessarily represent the exact design of your television.
DIGITAL
2
STOP
Before using your new product, please
read these instructions to prevent
any damage.
Do not plug your power cord in until all
other devices have been connected.
Coaxial (good video quality)
ETHERNET (optional)
Connect an antenna to
access live over-the-air TV.
HD
HD
MAKING CONNECTIONS
FEATURES
ANT/CABLE
ETHERNET
HDMI3
HDMI2
HDMI1
(ARC)
ETHERNET
AV IN
VIDEO
AUDIO
LR
QUICK SETUP GUIDE
65 "/ 70 "
60 Hz LED TV
4K ULTRA HD
NS65DF710NA21 / NS70DF710NA21
INCLUDED ACCESSORIES
Voice Remote with Alexa
and two AAA batteries
AA
A
+
AA
A
+
M4 × 24 mm screws
USB
HDMI3
HDMI2
HDMI1
(ARC)
AUDIO OUT
A
V IN
VIDEO
AUDIO
LR
ANT/CABLEETHERNET
DIGIT
AL OPTICAL
OUTPUT
M4 × 24 mm screws
M4 screws
(24 mm length) (4 pcs.)
TV stands
Power cord
Power indicator
Remote control sensor
Power/Input button
Press to turn your TV on or o manually.
When your TV is on, a short press
changes inputs and a long press turns
o your TV.
M4 screws
(24 mm length) (4 pcs.)
TV stands
VESA Mounting Pattern
300 x 300 mm
Screws: type M8, 12 mm to
14 mm length depending on the wall mount
65"
70"
M4 x 24 mm screws
65" TV shown
65" TV shown
USB
HDMI3
HDMI2
HDMI1
(ARC)
AUDIO
OUT
65" TV shown
70"
65"
70"
70"65"
NS-65_70DF710NA21_20-0178_QSG_V2_EN_Final.ai 1 4/10/2020 8:36:20 AM