USER GUIDE Portable Air Conditioner NS-AC06PWH1/NS-AC07PWH1/NS-AC08PWH1 Before using your new product, please read these instructions to prevent any damage.
Contents Introduction3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NS-AC06PWH1/NS-AC07PWH1/NS-AC08PWH1 Introduction Congratulations on your purchase of this Insignia product. Your NS-AC06PWH1, NS-AC07PWH1, or NS-AC08PWH1 is a state of the art portable air conditioner and is designed for reliable and trouble-free performance. IMPORTANT SAFEGUARDS Read these safety precautions before operation and installation to prevent death or injury to the user or other people and property damage. The following instructions must be followed.
Portable Air Conditioner • Do not operate the unit with a damaged cord, plug, power fuse, or circuit breaker. Discard the unit or return to an authorized service facility for examination and/or repair. • To reduce the risk of fire or electric shock, do not use this air conditioner with any solid-state speed control device. • The appliance shall be installed in accordance with national wiring regulations. • Contact the authorized service technician for repair or maintenance of this unit.
NS-AC06PWH1/NS-AC07PWH1/NS-AC08PWH1 • Appliance should be installed, operated, and stored in a room with a floor area according to the amount of refrigerant to be charged. For specific information on the type of gas and the amount, please refer to the relevant label on the unit itself. When there are differences between the label and the manual on the Min. room area description, the description on the label shall prevail. FOR R290 AMOUNT OF REFRIGERANT (KG) • • • • • • • • • MIN.
Portable Air Conditioner 3 Disposal of equipment using flammable refrigerants See national regulations. 4 Storage of equipment/appliances The storage of equipment should be in accordance with the manufacturer's instructions. 5 Storage of packed (unsold) equipment Storage package protection should be constructed such that mechanical damage to the equipment inside the package will not cause a leak of the refrigerant charge.
NS-AC06PWH1/NS-AC07PWH1/NS-AC08PWH1 7 • • 8 9 10 11 12 • Checks to electrical devices Repair and maintenance to electrical components shall include initial safety checks and component inspection procedures. If a fault exists that could compromise safety, then no electrical supply shall be connected to the circuit until it is satisfactorily dealt with. If the fault cannot be corrected immediately but it is necessary to continue operation, an adequate temporary solution shall be used.
Portable Air Conditioner 13 Charging procedures In addition to conventional charging procedures, the following requirements shall be followed. Ensure that contamination of different refrigerants does not occur when using charging equipment. Hoses or lines shall be as short as possible to minimize the amount of refrigerant contained in them. Cylinders shall be kept upright. Ensure that the refrigeration system is grounded prior to charging the system with refrigerant.
NS-AC06PWH1/NS-AC07PWH1/NS-AC08PWH1 Features • • • • • • • • • • • Enjoy 3 different fan speeds, a dehumidifier and a 62 ~ 95° F (16.6 ~ 35° C) temperature range for your comfort Remote with sensor lets you maintain or adjust the temperature even at a distance Timer functionality lets you set any temperature for a specific time of day or night Auto restart makes sure you’re ready to go after a power outage 6 ft. (1.
Portable Air Conditioner Back Upper air filter (behind the grill) Upper air intake Drain outlet Air outlet Lower air filter Lower air intake Power plug socket Power cord buckle Bottom tray drain outlet 10 www.insigniaproducts.
NS-AC06PWH1/NS-AC07PWH1/NS-AC08PWH1 Control panel 1 2 3 4 5 6 7 8 On Off CONSTANT FAN(Press 3s) 9 10 11 12 13 14 15 # COMPONENT DESCRIPTION 1 SWING button Turns the vent swing movement on or off. 2 On/Off indicator Lights when your air conditioner is turned on. 3 MODE indicators Lights to indicate which operating mode is selected. 4 Follow Me indicator Lights when the Follow Me feature is turned on. See Using the Follow Me feature on page 24.
Portable Air Conditioner Remote control Note: If you press a button for a feature that is not available, nothing happens. 7 1 2 3 ON/OFF SHORT CUT TIMER ON MODE TEMP 4 FAN 5 SLEEP 8 TIMER OFF SWING FOLLOW ME LED 9 10 11 6 # BUTTON DESCRIPTION 1 TEMP /TEMP Sets the temperature. This feature does not work in Fan mode. See Setting the operating temperature on page 23. 2 ON/OFF Turns your air conditioner on or off. 3 MODE Selects the operating mode.
NS-AC06PWH1/NS-AC07PWH1/NS-AC08PWH1 Installing remote control batteries 1 Press down on the remote control battery cover and slide the cover off the remote control. 2 Insert two AAA batteries (included) into the battery compartment. Make sure that the + marks on the batteries align with the + marks in the compartment. 3 Replace the cover. CAUTIONS: • Batteries should not be exposed to excessive heat, such as sunshine, heat registers, or fire. • Battery chemicals can cause a rash.
Portable Air Conditioner Remote control display 2 3 4 5 1 6 7 8 14 # INDICATOR DESCRIPTION 1 Operating mode Lights to indicate the selected mode: Auto, Cool, Dry, or Fan. 2 Power indicator Lights when your air conditioner is turned on. 3 Timer On/Timer Off Timer On appears when the timers are set. Timer Off appears when the timers are not set. 4 Low battery indicator Lights when your air conditioner detects low battery power in the remote control batteries.
NS-AC06PWH1/NS-AC07PWH1/NS-AC08PWH1 Before installing your air conditioner Finding a suitable location Make sure that: • You install your air conditioner on an even surface to minimize noise and vibration. • Your air conditioner is installed near a grounded plug. • You can access the collection tray drain on the back of your air conditioner. • Your air conditioner is at least 19.7" (50 cm) for the nearest walls. • The horizontal vent is 19.7 in. (50 cm) away from any obstacles.
Portable Air Conditioner Providing the correct power source Check your local power source. Your air conditioner requires a 115V, 60Hz power supply. WARNINGS: Make sure that: • The power outlet accepts a 3-prong grounding plug. The third prong on the power cord plug grounds your air conditioner to minimize the possibility of electric shock. Do not modify the power plug. • You do NOT plug anything else into the same power outlet as your air conditioner. You may overload the circuit which can cause a fire.
NS-AC06PWH1/NS-AC07PWH1/NS-AC08PWH1 Window installation kit The window installation kit fits windows 19.4'' ~ 62.2'' (49.3 ~ 158.1cm). HARDWARE HARDWARE QTY. QTY.
Portable Air Conditioner 2 Insert unit adapter on the assembled exhaust hose into the lower groove on the air outlet on your air conditioner. 3 Make sure that the hook on the adapter aligns with the notch on the air outlet, then press the adapter into the notch to lock it in place. Hook Notch Unit adapter Lower groove 18 www.insigniaproducts.
NS-AC06PWH1/NS-AC07PWH1/NS-AC08PWH1 STEP 2: Assembling the adjustable window slides Note: • Your air conditioner comes with three slides (A, B, and C). Depending on the size of the window, you may need two or more slides. • You may need to cut a slide to fit your window. Double-check the length before you cut. You need Bolt (optional) (3) Window slides Phillips screwdriver (not included) Scissors or knife (not included) 1 Select the window slides that fit your window.
Portable Air Conditioner STEP 3: Preparing the window frame and sash Note: • If you are installing your air conditioner in a window that opens vertically (a hung window), install the slides horizontally. • If you are installing your air conditioner in a window that opens horizontally (a sliding window), install the slides vertically.
NS-AC06PWH1/NS-AC07PWH1/NS-AC08PWH1 4 Cut the non-adhesive foam C to fit the width (hung window) or height (sliding window) of the window, then insert the foam between the glass and the window frame to prevent air and insects from getting into the room. Non-adhesive foam seal C Non-adhesive foam seal C Hung window Sliding window 5 Optional: Install the security bracket using two screws. The security bracket helps keep the window from moving.
Portable Air Conditioner STEP 4: Connecting the assembled exhaust hose to the window CAUTION: To make sure that your air conditioner is exhausted correctly: • Do not overextend or bend the exhaust hose. • Remove any obstacles within 20 in. (50 cm) of the exhaust hose. • Insert the window slide adapter on the end of the exhaust hose assembly into the hole on the window slide A.
NS-AC06PWH1/NS-AC07PWH1/NS-AC08PWH1 Setting the operating temperature Notes: • The operating temperature range for your air conditioner is 62° ~ 86° F (17° ~ 30° C). • You can’t adjust the temperature in the DRY operating mode. 1 Press the MODE button on the control panel or remote control to cycle through the operating modes. You can select: Auto, Fan, or Cool. As you cycle through the modes, the corresponding mode indicators light on the control panel and remote control displays.
Portable Air Conditioner Using the remote control 1 Press the TIMER ON (to set the ON timer) or TIMER OFF button (to set the OFF timer). 2 Press the TIMER ON or TIMER OFF button repeatedly to set the number of hours you want, then wait for two seconds. The timer turns on and the temperature setting appears in the display. 3 To turn the timer off, turn your air conditioner on or off or reset the timer to 0.0. Using the Sleep feature Note: The Sleep feature is not available in the FAN or DRY operating mode.
NS-AC06PWH1/NS-AC07PWH1/NS-AC08PWH1 Using the dehumidifier feature Note: You can’t change the fan speed in the Dry operating mode. You can use your air conditioner as a dehumidifier to remove moisture from the air. 1 If the exhaust hose is installed, remove it. 2 Make sure that all windows and doors are closed. 3 Set your air conditioner to the Dry operating mode. See Selecting the operating mode on page 22. 4 Remove the upper drain plug, then connect a 3/4 in. hose (not included) to the drain hole.
Portable Air Conditioner Cleaning the air filter CAUTION: Don’t run your air conditioner without the filter. Dust and lint can accumulate inside and reduce performance. Notes: • For the best performance, clean the air filter every two weeks. • Wipe the grill periodically to prevent blocked air flow. 1 Carefully pull the top of the grill away from your air conditioner, then pull the air filter up and out. 2 Wash the filter in warm, soapy water, then let it dry.
NS-AC06PWH1/NS-AC07PWH1/NS-AC08PWH1 Storing your air conditioner CAUTION: Store your air conditioner in a cool, dark place. Exposure to direct sunshine or extreme heat can shorten the lifespan of your air conditioner. 1 2 3 4 5 Run the fan for 12 hours, then empty the drain tray. See Emptying the drain tray on page 26. Run your air conditioner in FAN mode for 12 hours in a warm room to dry it and prevent mold. Turn off and unplug your air conditioner. Clean and reinstall the air filter.
Portable Air Conditioner Error codes Your air conditioner displays error and protection codes on the control panel display to help you resolve problems. Note: When an error occurs, turn off your air conditioner, check for obstructions, then turn it back on. If the error reoccurs, turn off and unplug your air conditioner. Contact a qualified technician for service. ERROR CODE DESCRIPTION E1 Room temperature sensor error. E2 Evaporator temperature sensor error. E3 Condenser temperature sensor error.
NS-AC06PWH1/NS-AC07PWH1/NS-AC08PWH1 ONE-YEAR LIMITED WARRANTY Definitions: The Distributor* of Insignia branded products warrants to you, the original purchaser of this new Insignia-branded product (“Product”), that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”).
For product inquiries, please contact us with the information below: 1-877-467-4289 www.insigniaproducts.com INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2019 Best Buy. All rights reserved.
