User Manual
Table Of Contents
- Contents
- Introduction
- IMPORTANT SAFEGUARDS
- Features
- Before installing your air conditioner
- Installing your air conditioner
- Using your air conditioner
- Turning your air conditioner on or off
- Selecting the operating mode
- Setting the operating temperature
- Setting the temperature format
- Adjusting the fan speed
- Controlling the vent
- Setting the timers
- Using the Sleep feature
- Setting the shortcut
- Turning the control panel display on or off
- Using the Follow Me feature
- Using the dehumidifier feature
- Maintaining your air conditioner
- Troubleshooting
- Specifications
- Legal notices
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
25
NS-AC06PWH1/NS-AC07PWH1/NS-AC08PWH1
Using the dehumidifier feature
You can use your air conditioner as a dehumidifier to remove moisture from the air.
1 If the exhaust hose is installed, remove it.
2 Make sure that all windows and doors are closed.
3 Set your air conditioner to the Dry operating mode. See Selecting the operating mode
on page 22.
4 Remove the upper drain plug, then connect a 3/4 in. hose (not included) to the drain hole.
5 Place the other end of the hose into a drain or other type of container for the water to drain into.
6 Turn your air conditioner on.
Maintaining your air conditioner
Safety guidelines
• Always unplug your air conditioner before cleaning or servicing.
• DO NOT use flammable liquids or chemicals to clean your air conditioner.
• DO NOT wash your air conditioner under running water. Doing so causes electrical danger.
• DO NOT run your air conditioner if the power supply is damaged during cleaning. You must replace a damaged power
cord.
Cleaning the exterior
1 Clean the exterior with a damp, lint-free cloth and mild detergent, then rinse with a damp cloth.
2 Dry your air conditioner with a lint-free cloth.
Note: You can’t change the fan speed in the Dry operating mode.
Upper drain
Hose