User Manual
Table Of Contents
- Introduction
- IMPORTANT SAFEGUARDS
- Features
- Before you mount your air conditioner
- Installing your air conditioner
- Using your air conditioner
- Using your air conditioner for the first time
- Turning your air conditioner on/off
- Selecting an air conditioner mode
- Selecting the fan speed
- Using ECO (energy saver) mode
- Setting the timer
- Using the remote as a thermostat (I SENSE)
- Using the check filter reminder
- Using sleep mode
- Turning the display on or off
- Locking air conditioner settings
- Controlling air flow
- Understanding sounds
- Cleaning and maintaining your air conditioner
- Removing your air conditioner from the window
- Troubleshooting
- Specifications
- Legal notices
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
19
8,000 BTU Window Air Conditioner
3 Lower the bracket until it rests on the windowsill.
4 For wooden windows with a flat sill, secure the bracket to the windowsill by drilling 1/8 in. pilot holes and securing the
bracket to the window with the 1/2” and 1” type A screws.
OR
• For vinyl windows with a flat sill, secure the bracket to the windowsill by drilling 1/8 in. pilot holes and securing the
bracket to the window with the 1/2” type A screws.
Note: If the gap between the bracket and the window sill exceeds 3/16 in. (5 mm), the bracket may be deformed while securing the 1"
type A screws, you can add a block to reduce the gap if possible.
Wooden window
Outside
Outside
Vinyl window
Inside
Inside
1 in. type A screw
1 in. type A screw
1/2 in. type
A screw
1/2 in. type
A screw
Wooden window
1/2 in. type
A screw
1/2 in. type
A screw
Vinyl window