User Manual
Table Of Contents
- Introduction
- IMPORTANT SAFEGUARDS
- Features
- Before you mount your air conditioner
- Installing your air conditioner
- Using your air conditioner
- Using your air conditioner for the first time
- Turning your air conditioner on/off
- Selecting an air conditioner mode
- Selecting the fan speed
- Using ECO (energy saver) mode
- Setting the timer
- Using the remote as a thermostat (I SENSE)
- Using the check filter reminder
- Using sleep mode
- Turning the display on or off
- Locking air conditioner settings
- Controlling air flow
- Understanding sounds
- Cleaning and maintaining your air conditioner
- Removing your air conditioner from the window
- Troubleshooting
- Specifications
- Legal notices
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
20
5 Move the angled support arms toward the exterior wall until the feet touch the wall. Place a level on the bracket and
adjust the support arms so that it is level or tilted 1/4 bubble downward and towards the outside.
6 Insert the main support pin through the holes in the main support and angled support arm.
7 Using the numbers on the main support, repeat the adjustment for the other angled support arm matching the hole
number from the first support arm.
8 Check the level again and make sure that the bracket is secure. If further adjustment is required, use alternate holes
where the main supports attach to the horizontal bracket.
1/4 bubble on
the level
Angled
support arm
Main support pin