User Manual
Table Of Contents
- Introduction
- IMPORTANT SAFEGUARDS
- Features
- Before you mount your air conditioner
- Installing your air conditioner
- Using your air conditioner
- Using your air conditioner for the first time
- Turning your air conditioner on/off
- Selecting an air conditioner mode
- Selecting the fan speed
- Using ECO (energy saver) mode
- Setting the timer
- Using the remote as a thermostat (I SENSE)
- Using the check filter reminder
- Using sleep mode
- Turning the display on or off
- Locking air conditioner settings
- Controlling air flow
- Understanding sounds
- Cleaning and maintaining your air conditioner
- Removing your air conditioner from the window
- Troubleshooting
- Specifications
- Legal notices
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
21
8,000 BTU Window Air Conditioner
9 After making any final adjustments, insert the two cotter pins into the main support pin on both support brackets.
10 If necessary, cover the holes on the front of the bracket with bracket sealing foam.
Step 3: Installing your air conditioner on the support bracket
1 Measure the width of your window track (the vertical track your window slides up and down in). If it measures 1/2“ or
less, flip the anti-tip bracket so that the small end faces out, then continue with your air conditioner installation.
CAUTION: Do not leave your air conditioner unattended during installation.
Bracket sealing foam
Bracket sealing foam
This side faces indoors
Anti-tip bracket