User Manual
Table Of Contents
- Introduction
- IMPORTANT SAFEGUARDS
- Features
- Before you mount your air conditioner
- Installing your air conditioner
- Using your air conditioner
- Using your air conditioner for the first time
- Turning your air conditioner on/off
- Selecting an air conditioner mode
- Selecting the fan speed
- Using ECO (energy saver) mode
- Setting the timer
- Using the remote as a thermostat (I SENSE)
- Using the check filter reminder
- Using sleep mode
- Turning the display on or off
- Locking air conditioner settings
- Controlling air flow
- Understanding sounds
- Cleaning and maintaining your air conditioner
- Removing your air conditioner from the window
- Troubleshooting
- Specifications
- Legal notices
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
23
8,000 BTU Window Air Conditioner
5 Using 1/4 in. and 1/2 in. type B screws, install the open window brackets with an “L” shaped screwdriver, if needed.
Step 4: Installing the sealing foam and anti-tip brackets
1 Measure the distance between the right side arm hinge and the closest part of the window frame. Add 1/4 in. to this
distance and cut the side arm foam block to width.
WARNING: Failure to install the open window brackets could cause injury or property damage.
CAUTION: Do not leave your air conditioner unattended during installation.
1/2 in. type B screw
1/4 in. type B screw
Measure here