User Manual
Table Of Contents
- Introduction
- IMPORTANT SAFEGUARDS
- Features
- Before you mount your air conditioner
- Installing your air conditioner
- Using your air conditioner
- Using your air conditioner for the first time
- Turning your air conditioner on/off
- Selecting an air conditioner mode
- Selecting the fan speed
- Using ECO (energy saver) mode
- Setting the timer
- Using the remote as a thermostat (I SENSE)
- Using the check filter reminder
- Using sleep mode
- Turning the display on or off
- Locking air conditioner settings
- Controlling air flow
- Understanding sounds
- Cleaning and maintaining your air conditioner
- Removing your air conditioner from the window
- Troubleshooting
- Specifications
- Legal notices
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
24
2 Apply window sealing foam to the side arm foam block as shown. Note that the window sealing foam attaches to the
side next to your air conditioner.
3 Insert a side arm foam block into the side arm hinge until the top front of the side arm foam is flush with the top of the
hinge.
4 Repeat steps 1 through 3 for the left side of your air conditioner.
5 Remove the two 1/2 in. screws from the top left and right sides of your air conditioner.
CAUTION: The factory installed 1/2 in. screws must be re-used to secure the anti-tip brackets. Failure to use these screws could result
in damage to your air conditioner.
Window sealing foam
Window sealing foam
Side arm foam block
Side arm foam block
Additional side
arm foam
Air conditioner
Air conditioner
Vinyl window with lipped sill
Wooden window with flat sill
Side arm foam block
To p
Front Side arm
foam block
Note: The “front” of the side arm
foam block goes toward the inside
of the house.