User Manual
Table Of Contents
- Introduction
- IMPORTANT SAFEGUARDS
- Features
- Before you mount your air conditioner
- Installing your air conditioner
- Using your air conditioner
- Using your air conditioner for the first time
- Turning your air conditioner on/off
- Selecting an air conditioner mode
- Selecting the fan speed
- Using ECO (energy saver) mode
- Setting the timer
- Using the remote as a thermostat (I SENSE)
- Using the check filter reminder
- Using sleep mode
- Turning the display on or off
- Locking air conditioner settings
- Controlling air flow
- Understanding sounds
- Cleaning and maintaining your air conditioner
- Removing your air conditioner from the window
- Troubleshooting
- Specifications
- Legal notices
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
29
8,000 BTU Window Air Conditioner
Using sleep mode
During Sleep mode, the temperature will increase by 2° F (1–2° C) 30 minutes after the mode is selected, then increase by
another 2° F (1–2° C) after an additional 30 minutes. This new temperature is maintained for 6–7 hours, then Sleep mode
turns off. Your air conditioner cools to the original temperature and continues to operate as first programmed.
• Press the SLEEP button to turn on sleep mode. The sleep indicator on your air conditioner, or on the remote control
lights.
• To turn off Sleep mode, press the SLEEP button again. The sleep indicator on your air conditioner, or on the remote
control turns off.
Turning the display on or off
Press the LED button on your air conditioner, or the LED DISPLAY button on your remote control, to turn your air
conditioner display on or off.
Locking air conditioner settings
• Press I SENSE and TIMER OFF for five seconds to lock the remote control's settings so that they cannot be changed.
Press I SENSE and TIMER OFF for two seconds again to unlock the remote control.
Controlling air flow
The louvers on the front of your air conditioner let you direct the air flow up or down and left or right throughout the room
as needed. Press the SWING button until the desired up/down direction is obtained. Move the louvers from side to side
until the desired left/right direction is obtained.
Understanding sounds
These sounds are part of your air conditioner’s normal operation.
Note: The up/down louvers cannot be adjusted manually.
Press the SWING button to
control up/down motion.
Manually adjust the louvers for left/right air flow
Manually adjust the louvers for left/right air flow
Sound of rushing air
Rushing air being moved by the
fan.
High-pitched chatter
High-efficiency compressor may have
chatter during the cooling cycle.
Vibration
Poor wall or window construction
or incorrect installation.
Pinging or switching
Droplets of water hitting the
condenser.
Gurgle/Hiss
Refrigerant passing through
the evaporator.