USER GUIDE 130-Can Beverage Cooler NS-BC130GP1 Before using your new product, please read these instructions to prevent any damage.
Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
130-Can Beverage Cooler Introduction Congratulations on your purchase of a high-quality Insignia product. Your NS-BC130GP1 represents the state of the art in beverage cooler design and is designed for reliable and trouble-free performance. IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your cooler.
NS-BC130GP1 12 Unplug this appliance during lightning storms or when it will not be used for long periods of time. 13 Make sure that the available AC power matches the voltage requirements of 14 15 16 17 18 19 this appliance. Do not handle the plug with wet hands. This could result in an electric shock. Unplug the power cord by holding the plug, never by pulling the cord. Do not turn the appliance on or off by plugging or unplugging the power cord. Turn off the appliance before unplugging it.
130-Can Beverage Cooler 9 10 11 12 13 14 15 If a component part is damaged, it must be replaced by the manufacturer, its service agent, or similar qualified persons in order to avoid a hazard. Dispose of the cooler according to local regulations as the cooler contains flammable gas and refrigerant. Follow local regulations regarding disposal of the cooler due to flammable refrigerant and gas.
NS-BC130GP1 Components Control panel/ Display Fan Glass door Shelf Leveling feet 6 www.insigniaproducts.
130-Can Beverage Cooler Control and display panel Standby BUTTON Light LED Display Temperature +/- FUNCTION • Press to turn the power on or off. • Hold for three seconds to set your cooler to “Standby” mode. Press to turn the interior light on or off. Press to increase the temperature by one degree. Press to decrease the temperature by one degree. Press both buttons simultaneously to change the display from F° to C° or back again. Notes: • Touch the control panel lightly when pressing the keys.
NS-BC130GP1 • • • • Avoid placing the cooler in moist areas. This unit is not designed to be installed in an RV or used with an inverter. Do not stack your cooler. For your cooler to operate normally, avoid placing it in areas with high magnetic fields or high humidity. 21.46 in. (54.5 cm) 33.2 in. (84.4 cm) 33.66 in. (85.5 cm) 22.2 in. (56.5 cm) Leveling your cooler • It is very important for the cooler to be level in order to function properly.
130-Can Beverage Cooler 5 Remove the upper hinge and axle sleeve. Rivets Hinge cover Hole cap Hinge bolts Upper hinge Axle sleeve 6 Remove the door from the beverage cooler. 7 Use a Phillips screwdriver to remove the door stopper screws, then remove the door stopper. Door stopper Axle sleeve Door stopper screws www.insigniaproducts.
NS-BC130GP1 8 Use a Phillips screwdriver to remove the hinge bolts, then remove the lower hinge and the leveling foot. Leveling foot Lower hinge Hinge bolts 9 Attach the lower hinge and leveling feet to the opposite sides of the beverage cooler. Leveling foot Lower hinge Hinge bolts 10 Replace the glass door, then reinstall the upper hinge and axle sleeve. Make sure that you align the door and check the tightness of the door gasket. 11 Reinstall the rivets and hole cap.
130-Can Beverage Cooler Grounding requirement This cooler must be grounded. This cooler is equipped with a cord having a grounding wire with a grounding plug. The plug must be inserted into an outlet that is properly installed and grounded. Consult a qualified electrician or service person if the grounding instructions are not completely understood, or if doubt exists as to whether the cooler is properly grounded. WARNINGS: • Improper use of the grounding plug can result in a risk of electric shock.
NS-BC130GP1 Using your beverage cooler Turning on your cooler Press the button to turn your cooler on. The display screen and indicators blink for three seconds and an audible beep is heard, then the compressor starts working. You can manually set your unit to “Standby” mode by touching the button for approximately three seconds, provided that the control keys are unlocked and no other setting is in effect (the display is not blinking). Repeating this action restarts the unit.
0-Can Beverage Cooler Arranging your beverages In order to maintain good air circulation in the cooler, do not let the beverages touch the back of the cooler.
NS-BC130GP1 Defrosting your cooler The ice build-up on the inner back wall of your cooler will automatically be defrosted in a compressor-off cycle. When you press the button, the compressor and circulation fan stops running while defrosting is in process. Defrost water will drain out of the cooler, passing through the drain outlet in the inner back wall into a drain pan located above the compressor. The water will evaporate from the drain pan on its own.
130-Can Beverage Cooler Troubleshooting Error codes If a fault is detected, the display shows one of the following codes: • E1: Temperature sensor fault • E4: Defrost sensor fault If any of these error codes appears on the display, contact your local dealer or service center. Do not try to repair the cooler yourself. PROBLEM SOLUTION The cooler does not operate. • Make sure that the cooler is plugged in and that the plug is pushed completely into the outlet.
NS-BC130GP1 ONE-YEAR LIMITED WARRANTY Definitions: The Distributor* of Insignia branded products warrants to you, the original purchaser of this new Insignia-branded product (“Product”), that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”).
130-Can Beverage Cooler • • • • • • • Connection to an incorrect voltage or power supply Attempted repair by any person not authorized by Insignia to service the Product Products sold “as is” or “with all faults” Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.
www.insigniaproducts.com 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2020 Best Buy. All rights reserved.
