USER GUIDE 165-Can Beverage Cooler NS-BC1ZSS9 Before using your new product, please read these instructions to prevent any damage.
Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
165-Can Beverage Cooler Introduction Congratulations on your purchase of a high-quality Insignia product. Your NS-BC1ZSS9 represents the state of the art in beverage cooler design and is designed for reliable and trouble-free performance. IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your cooler.
12 Unplug this appliance during lightning storms or when it will not be used for long periods of time. 13 Make sure that the available AC power matches the voltage requirements of 14 15 16 17 18 19 this appliance. Do not handle the plug with wet hands. This could result in an electric shock. Unplug the power cord by holding the plug, never by pulling the cord. Do not turn the appliance on or off by plugging or unplugging the power cord. Turn off the appliance before unplugging it.
165-Can Beverage Cooler 8 9 10 11 12 13 14 15 This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
Features • • • • • • • 165 12-ounce can capacity Temperature range from 34° to 50° F (1° to 10° C) Auto-defrosting fan to eliminate ice and condensation build-up Touch controls and LED display Interior light Reversible door Removable shelves Package contents • • • • Beverage cooler Handle Door reversal accessories (hex wrench, left hinge, & spare plastic plugs) User Guide Components Temperature control panel Glass door Wire shelves Air vent 6 www.insigniaproducts.
165-Can Beverage Cooler Control and display panel Light Display Raise Temperature 5 Standby BUTTON Lower temperature Change temperature unit (°F/°C) FUNCTION Hold for five seconds to set your cooler to “Standby” mode (the cooler stops cooling and light turns off ). Press to set whether the interior light stays on or off while the door is closed. Press to increase the temperature by one degree. Press to decrease the temperature by one degree.
• If the cooler is not properly ventilated, the compressor will use more power. Make sure that you leave space on all sides: • Top: 1/4 in. (.5 cm) • Sides: 1/4 in. (.5 cm) • Back: 13/16 in. (2.0 cm) At least 34 1/2 in. (87.6 cm) At least 24 1/4 in. (61.5 cm) 34 5/16 in. (87.0 cm) At least 23 13/16 in. (60.5 cm) 23 7/16 in. (59.5 cm) 23 7/16 in. (59.5 cm) • Leave enough space for the door to open at least 90 degrees.
165-Can Beverage Cooler Installing the handle 1 Align the handle with the two bolts on the glass door. Handle 2 Secure the handle with the 3 mm hex wrench (included), making sure that the screw holes on the handle are facing downward. Screw hole facing downward Hex wrench Reversing the door To reverse the door you will need a Phillips screwdriver. Have someone available to assist you in the process. Make sure that you keep all of the parts you remove to reuse them later.
2 Remove the upper hinge bolt (1) and lift the door off the cooler. 3 To reverse the cooler’s hinges: A Remove the three screws (2) securing the upper hinge (3) and the three plastic caps (4) at the top left side of the cooler. Set the upper hinge aside and save it in case you need to reverse the door again. Note: If you reverse the door a second time, the hinge will be on the right side of the cooler. 10 www.insigniaproducts.
165-Can Beverage Cooler B Install the upper hinge from the included accessories bag (3) to the opposite side, then insert the plastic caps (4) into the old screw holes. Note: The left upper hinge and right upper hinge are not the same. Make sure that you install the extra hinge that was included with your refrigerator. C Remove the two screws (5) holding the air cover (7) in place. Set aside. www.insigniaproducts.
D Remove the two screws (8) securing the door support (9), the three screws (10) securing the lower hinge (11), and the lower hinge shaft (12). E Reinstall the door support (9) and lower hinge (11) on the opposite sides, then place the lower hinge shaft (12) back into the lower hinge. 12 www.insigniaproducts.
165-Can Beverage Cooler F Secure the air cover (7) to the refrigerator with the screws (5). 4 To prepare the cooler door: A Remove the upper sleeve (2) and hole plugs from the top of the door, and retain them to use in step D. www.insigniaproducts.
B Remove the light switch block (4) and door stopper (5) from the bottom of the door by removing the corresponding screws (3) and sleeve (6). C Rotate the door 180°. D Insert the upper sleeve (2) and hole plugs into the top of the door. 14 www.insigniaproducts.
165-Can Beverage Cooler E Secure the light switch block (4) and door stopper (5) to the bottom of the door with their corresponding screws (3) and sleeve (6). Note: Make sure that these parts are installed on the side WITHOUT the handle. 5 Place the door on the cooler’s lower hinge shaft, then secure with the upper hinge bolt (1). 6 Adjust the leveling feet to level the cooler. www.insigniaproducts.
Connecting to power • Plug the cooler into a dedicated, properly installed grounded wall outlet. This appliance should be operated on a separate electrical circuit from other operating appliances. CAUTION: This unit is not designed to be installed in an RV or used with an inverter. • Plug in and run your cooler for three to four hours before making any temperature adjustments and before adding beverages. This allows your cooler to reach a stable temperature. Notes: • Check your local power source.
165-Can Beverage Cooler Using your beverage cooler Turning on your cooler • Plug your cooler in to turn it on for the first time. The display lights up for three seconds, the cooler beeps, then the compressor starts working. OR If in standby mode, press and hold (power) for five seconds to turn your cooler on. The display lights up and the compressor starts working.
Arranging your beverages In order to maintain good air circulation in the cooler, do not let the beverages touch the back of the cooler. Due to the air circulation, the temperature in the upper area of the cooler will be higher than in the lower area of the cooler. To maximize your storage space, arrange your drinks as shown: Top shelf Middle & Bottom Shelves Bottom zone Stores 165 Cans 18 www.insigniaproducts.
165-Can Beverage Cooler Maintaining your beverage cooler Your cooler is designed for year-round use with only minimal cleaning and maintenance. Before using your cooler for the first time, wipe the cabinet with a mild detergent and warm water, then wipe dry with a dry cloth. Do this periodically to keep your cooler looking new.
Moving your beverage cooler Note: Make sure that the cooler stays in the upright position while transporting. 1 2 3 4 Turn off the cooler and unplug it from the wall outlet. Remove all beverages. Securely tape down all loose items inside your cooler. Tape the door shut. Tips on saving energy • Locate your cooler in the coolest area of the room, away from heat-producing appliances or heating ducts, and out of direct sunlight. • Do not overload the cooler. It forces the compressor to run longer.
165-Can Beverage Cooler Problems and solutions PROBLEM SOLUTION The cooler does not operate. • Make sure that the cooler is plugged in and that the plug is pushed completely into the outlet. • Check the house fuse/circuit breaker box and replace the fuse or reset the circuit breaker. • If a power failure occurs, the cooler turns off. Wait until the power is restored, then turn it on again. The cooler door does not close completely. • Adjust the shelf properly. • Clean the door gaskets.
ONE-YEAR LIMITED WARRANTY Definitions: The Distributor* of Insignia branded products warrants to you, the original purchaser of this new Insignia-branded product (“Product”), that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”).
165-Can Beverage Cooler • • • • • • Attempted repair by any person not authorized by Insignia to service the Product Products sold “as is” or “with all faults” Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.
www.insigniaproducts.com 1-877-467-4289 (U.S. and Canada) INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2022 Best Buy. All rights reserved.