User Manual

18
NS-BTST21
www.insigniaproducts.com
Replacing the stylus (Part number: Audio-Technica ATN3600L)
The stylus should last about 300 hours under normal use. However, we
recommend that you replace the stylus as soon as you notice a change in sound
quality. Prolonged use of a worn-out stylus can damage records.
1 Turn the RPM selector switch to OFF to turn off the power.
2 Remove the stylus by pulling it downward and forward at the same time.
3 Insert the new stylus upwards into the slot under the head, then push upward
until the tip locks into place.
CAUTIONS:
• Do not remove or bend the stylus.
• Do not touch the needle to avoid injury your hand.
• Keep out of reach of children.