User Manual

NS-DASH152
9
www.insigniaproducts.com
6 Connect the provided USB cable to the Micro USB
port on your dash camera, then thread the cable
from your dash camera, around the outer edge of
the windshield, and to a 12 V vehicle accessory port.
7 Plug the cable into a vehicle power adapter, then
plug the adapter into the vehicle accessory port and
turn on your vehicle. Your dash camera starts
automatically.
8 Rotate the mounting bracket to adjust the viewing
angle as needed.
9 Follow the on-screen prompts to set up your dash
camera. Make sure that you format the memory card
during setup. If the card is not formatted, it may not
record or play back. See Formatting a MicroSD
memory card on page 10.
12V 180W