User Guide | Guide de l’utilisateur | Guía del Usuario 10.4" Digital Picture Frame Cadre photo numérique de 10,4 po Marco digital para fotos de 10.
Insignia NS-DPF10A Digital Picture Frame Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Setting up your picture frame . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Using your picture frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Insignia NS-DPF10A Digital Picture Frame • • • • Keep your picture frame out of direct sunlight and heat sources. Protect the power cord. Route power cords so that they are not likely to be walked on or pinched by items placed on or against them. Pay particular attention to the point where the cord attaches to the digital picture frame. Only use the AC adapter included with your picture frame. Using any other power adapter will void your warranty.
Insignia NS-DPF10A Digital Picture Frame Sides CF 4 6 7 8 9 10 SD/MMC/NS 3 5 PC 2 USB 1 11 # Component Description 1 USB Connect an external device, such as a camera or USB flash drive, to this port. 2 PC Connect a PC to this port. 3 SD/MS/MMC/ xD-Picture Insert an SD, MS, MMC, or xD-Picture memory card into this slot. 4 CF Insert a CF memory card into this slot. 5 MENU Press to open or close the on-screen menu. 6 ENTER Press to start or pause playback.
Insignia NS-DPF10A Digital Picture Frame Back Stand You can use your picture frame in landscape (horizontal) or portrait (vertical) mode. To change the mode: • Rotate the stand until it locks into place. • To remove the stand for wall-mounting, rotate the stand to the center position, then remove. 4 www.insignia-products.
Insignia NS-DPF10A Digital Picture Frame Remote control POWER MUTE 14 1 2 3 4 5 6 7 PHOTO MUSIC MOVIE TEXT COMBO EDIT SETUP CALENDAR ESC MENU VIEW BACK MUSIC -/-UP RIGHT LEFT 8 ENTER 9 DOWN 10 11 12 13 VOL+ 15 16 17 18 19 20 21 VOL- ZOOM ROTATE REV PLAY COPY/DEL PREV FWD NEXT 22 23 24 25 26 # Button Function 1 POWER Press to turn your picture frame on or off. 2 PHOTO Press to play a slideshow of pictures. 3 MUSIC Press to play an MP3 file.
Insignia NS-DPF10A Digital Picture Frame # Button Function 12 PLAY Press to start or pause slideshow, movie, or audio playback. 13 COPY/DEL Press to copy files to or delete files from internal memory. 14 MUTE Press to mute the audio. Press again to restore the audio. 15 TEXT Press to play a text file. 16 MOVIE Press to play a movie (video) clip. 17 CALENDAR Press to display the calendar. 18 SETUP Press to change settings. 19 BACK MUSIC Press to play an MP3 file during a slideshow.
Insignia NS-DPF10A Digital Picture Frame 3 Slide the power switch to the ON position. Your picture frame starts playing a slideshow with the pictures stored in its internal memory. Connecting to a PC You can connect your picture frame to a PC using the PC port. When your picture frame is connected to a PC, you can drag files from the PC to your picture frame. The files are stored in your picture frame’s internal memory. You can also delete files from your picture frame’s memory.
Insignia NS-DPF10A Digital Picture Frame Using your picture frame Your picture frame can display pictures or video and can play MP3 files. Using the on-screen menu To access the on-screen menu: 1 Press MENU. The MAIN MEMU opens. 2 Press the arrow buttons to select an option, then press ENTER. A screen opens that lets you change the option. A third screen may appear, depending on the option. 8 www.insignia-products.
Insignia NS-DPF10A Digital Picture Frame Playing a slideshow To play a slideshow: 1 On the main menu, select Picture, then press ENTER. A screen opens that lists the types of media you can select. 2 Press the arrow buttons to select the media that has the pictures you want to play, then press ENTER. To access your picture frame’s internal memory, select Memory. A screen opens that lists the names of the files on the media you selected. 3 Press ENTER to start playback with the first file.
Insignia NS-DPF10A Digital Picture Frame Playing MP3 files To play MP3 files: 1 On the main menu, select Music, then press ENTER. A screen opens that lists the types of media you can select. 2 Press the arrow buttons to select the media that has the MP3 files you want to play, then press ENTER. To access your picture frame’s internal memory, select Memory. 3 Press ENTER. A screen appears that lists the MP3 files on the media you selected. 4 Press ENTER to start playback with the first MP3 file.
Insignia NS-DPF10A Digital Picture Frame Playing a slideshow with music To play a slideshow with music: 1 On the main menu, select Combo, then press ENTER. A screen opens that lists the types of media you can select. 2 Press the arrow buttons to select the media that has the files you want to play, then press ENTER. To access your picture frame’s internal memory, select Memory. 3 Press ENTER. A screen appears that lists the picture and MP3 files on the media you selected. 4 Press ENTER to start playback.
Insignia NS-DPF10A Digital Picture Frame Playing a movie clip To play a movie clip: 1 On the main menu, select Movie, then press ENTER. A screen opens that lists the types of media you can select. 2 Press the arrow buttons to select the media that has the move clip you want to play, then press ENTER. To access your picture frame’s internal memory, select Memory. 3 Press ENTER. A screen appears that lists the movie clips on the media you selected. 4 Press ENTER to start playback.
Insignia NS-DPF10A Digital Picture Frame 3 Press ENTER. A screen appears that lists the text files on the media you selected. 4 Press ENTER to start playback. Your picture frame starts playing the first text file. 5 Press the arrow buttons to navigate through the text file. 6 Press MENU to end and go to the main menu. Copying or deleting files You can copy files from an external source to your picture frame’s memory and delete files from your picture frame’s memory.
Insignia NS-DPF10A Digital Picture Frame Adjusting picture frame settings You can: • Select a language for the on-screen menu • Manage slideshow settings • Adjust clock and alarm settings • Set startup options • Adjust video settings • Restore default settings • View the software version To use the Setup option: 1 On the main menu, select Setup, then press ENTER. 2 Press the arrow buttons to select the option you want to adjust, then press ENTER.
Insignia NS-DPF10A Digital Picture Frame Setting the slideshow display rate Select Picture Set, press the up or down arrow button to highlight Slideshow Mode, then press ENTER to display the rate option (the amount of time a picture is displayed before the next picture appears). Press the up or down arrow button to select a rate, then press ENTER. Setting the picture transitions Press the up or down arrow button to highlight Picture Play Mode, then press ENTER.
Insignia NS-DPF10A Digital Picture Frame Setting the alarm Press the arrow buttons to set the alarm time, select the number of rings you want to hear when the alarm goes off, and turn the alarm on or off. Setting start up options You can select what you want to see or hear when you turn on your picture frame. Press the arrow buttons to select the start up option you want. Adjusting video settings You can adjust the brightness, contrast, and color saturation.
Insignia NS-DPF10A Digital Picture Frame Restoring default settings You can restore all settings to the factory defaults. Press the right arrow to highlight Default Set, then press ENTER. Viewing the software version You can view the software version for your picture frame. Changing the decorative frame Your picture frame has interchangeable decorative frames. To change the decorative frame: 1 Remove the four screws on the back of your picture frame.
Insignia NS-DPF10A Digital Picture Frame Maintaining your digital picture frame Cleaning the LCD Screen Treat the screen gently. The screen is made of glass and can be scratched or broken. To clean fingerprints or dust from the LCD screen, we recommend using the cloth provided or a soft, non-abrasive cloth such as a camera lens cloth. If you use a commercial LCD cleaning kit, do not apply the cleaning liquid directly to the LCD screen. Clean the LCD screen with the cleaning cloth moistened with the liquid.
Insignia NS-DPF10A Digital Picture Frame Function Specification Internal memory 256 MB Remote control Yes Legal Notices This product complies with requirements set forth in the FCC Rules and Regulations part 15, Subpart B and the measurement procedure according to ANSI C63.4. www.insignia-products.
Insignia NS-DPF10A Digital Picture Frame 20 www.insignia-products.
Insignia NS-DPF10A Digital Picture Frame 6-month limited warranty Insignia Products (“Insignia”) warrants to you, the original purchaser of this new NS-DPF10A (“Product”), that the Product shall be free of defects in the original manufacture of the material or workmanship for a period of 6 months from the date of your purchase of the Product (“Warranty Period”). This Product must be purchased from an authorized dealer of Insignia brand products and packaged with this warranty statement.
Insignia NS-DPF10A Digital Picture Frame • • Modification of any part of the Product, including the antenna Plasma display panel damaged by static (non-moving) images applied for lengthy periods (burn-in).
Cadre photo numérique Insignia NS-DPF10A Cadre photo numérique Insignia NS-DPF10A Table des matières Bienvenue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Informations sur la sécurité . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Fonctionnalités . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Installation du cadre photo numérique . . . . . . . . . . . . . . . . . . 28 Fonctionnement du cadre photo numérique . . . . . . . . . . . .
Cadre photo numérique Insignia NS-DPF10A • • • • Maintenir le cadre photo numérique à l'écart de la lumière solaire directe et des sources de chaleur. Protéger le cordon d’alimentation. Les cordons d’alimentation électrique doivent être acheminés afin que personne ne puisse marcher dessus et qu’aucun objet posé dessus ne vienne les entraver. Prêter une attention toute particulière au point de raccordement du cordon au cadre photo numérique.
Cadre photo numérique Insignia NS-DPF10A Côtés CF 4 6 7 8 9 10 SD/MMC/NS 3 5 PC 2 USB 1 11 # Composant Description 1 USB Connecter à ce port un périphérique externe, tel qu'un appareil de photo ou un lecteur USB à mémoire flash. 2 PC Connecter un PC à ce port. 3 Fente pour Insérer une carte mémoire SD, MCC ou xD-Picture cartes SD/MS/ dans cette fente. MMC/xD-Picture 4 CF 5 MENU Permet d'afficher ou de fermer le menu d’écran.
Cadre photo numérique Insignia NS-DPF10A # Composant Description 10 Interrupteur Marche/Arrêt Le déplacer pour la mise sous ou hors tension du cadre photo. 11 Connecteur d’alimentation Brancher le cordon d’alimentation CA sur cette prise. Arrière Support Le cadre photo peut être utilisé en mode paysage (horizontal) ou portrait (vertical). Pour modifier le mode : • Faire pivoter le support jusqu'à ce qu'il s'enclenche en position.
Cadre photo numérique Insignia NS-DPF10A Télécommande POWER MUTE 14 1 2 3 4 5 6 7 PHOTO MUSIC MOVIE TEXT COMBO EDIT SETUP CALENDAR ESC MENU VIEW BACK MUSIC -/-UP RIGHT LEFT 8 ENTER 9 DOWN 10 11 12 13 VOL+ 15 16 17 18 19 20 21 VOL- ZOOM ROTATE REV PLAY COPY/DEL PREV FWD NEXT 22 23 24 25 26 # Touche Fonction 1 MARCHE/ARRÊT Permet d'allumer ou d'éteindre le cadre photo. 2 PHOTO Permet de lancer une présentation de photos. 3 MUSIQUE Permet de lire un fichier MP3.
Cadre photo numérique Insignia NS-DPF10A # Touche Fonction 10 ZOOM Permet d'agrandir (zoom) une photo de 20 %. 11 PIVOTEMENT Pivotement de 90°. 12 LECTURE Permet de commencer ou d'arrêter momentanément une présentation de photos, un film ou la lecture audio. 13 COPIER/ SUPPRIMER Permet de copier ou de supprimer des fichiers de la mémoire interne. 14 SOURDINE Permet de mettre le son en sourdine. Permet de restaurer le son. 15 TEXTE Permet de visualiser un fichier texte.
Cadre photo numérique Insignia NS-DPF10A • • Chiffon de nettoyage Guide de l’utilisateur Pour installer le cadre photo numérique : 1 Brancher une extrémité du cordon d'alimentation CA sur la prise située sur le côté du cadre photo et l'autre extrémité sur une prise secteur. 2 Insérer une carte mémoire dans la fente appropriée. 3 Mettre l'interrupteur marche-arrêt sur ON (Marche). Le cadre photo commence une présentation à partir des photos enregistrées sur la mémoire interne.
Cadre photo numérique Insignia NS-DPF10A Pour connecter un périphérique : • Brancher une extrémité du câble USB sur le port USB situé sur le côté du cadre photo, puis brancher l'autre extrémité sur un des ports USB du périphérique. Remarque Certains périphériques, tels que les clés USB, ne nécessitent pas de câbles USB. Fonctionnement du cadre photo numérique Le cadre photo peut afficher des photos ou des vidéos et reproduire des fichiers MP3.
Cadre photo numérique Insignia NS-DPF10A Présentation de photos Pour effectuer une présentation de photos : 1 Dans le menu principal, sélectionner Picture (Photo), puis appuyer sur ENTER (Entrée). Une fenêtre s'affiche avec la liste des types de médias qui peuvent être sélectionnés. 2 Utiliser les touches directionnelles pour sélectionner le média qui a les photos souhaitées pour la présentation, puis appuyer sur ENTER. Pour accéder à la mémoire interne du cadre photo, sélectionner Memory (Mémoire).
Cadre photo numérique Insignia NS-DPF10A Lecture de fichiers MP3 Pour lire des fichiers MP3 : 1 Dans le menu principal, sélectionner Music (Musique), puis appuyer sur ENTER (Entrée). Une fenêtre s'affiche avec la liste des types de médias qui peuvent être sélectionnés. 2 Utiliser les touches directionnelles pour sélectionner le média qui a les fichiers MP3 souhaités, puis appuyer sur ENTER. Pour accéder à la mémoire interne du cadre photo, sélectionner Memory (Mémoire). 3 Appuyer sur ENTER (Entrée).
Cadre photo numérique Insignia NS-DPF10A Présentation de photos avec accompagnement musical Pour effectuer une présentation de photos avec accompagnement musical : 1 Dans le menu principal, sélectionner Combo, puis appuyer sur ENTER (Entrée). Une fenêtre s'affiche avec la liste des types de médias qui peuvent être sélectionnés. 2 Utiliser les touches directionnelles pour sélectionner le média qui a les fichiers souhaités, puis appuyer sur ENTER.
Cadre photo numérique Insignia NS-DPF10A Reproduction d'une séquence de film Pour reproduire une séquence de film 1 Dans le menu principal, sélectionner Movie (Film), puis appuyer sur ENTER (Entrée). Une fenêtre s'affiche avec la liste des types de médias qui peuvent être sélectionnés. 2 Utiliser les touches directionnelles pour sélectionner la séquence de film souhaitée, puis appuyer sur ENTER. Pour accéder à la mémoire interne du cadre photo, sélectionner Memory (Mémoire). 3 Appuyer sur ENTER (Entrée).
Cadre photo numérique Insignia NS-DPF10A Visualisation d'un fichier texte Il est possible de visualiser des fichiers texte au format ASCII. Les fichiers au format ASCII peuvent être créés en utilisant le Bloc-notes (Notepad) de Windows. Pour visualiser un fichier texte : 1 Dans le menu principal, sélectionner Text (Texte), puis appuyer sur ENTER (Entrée). 2 Utiliser les touches directionnelles pour sélectionner le média qui a le fichier texte souhaité, puis appuyer sur ENTER.
Cadre photo numérique Insignia NS-DPF10A 7 Appuyer sur COPY/DEL (Copier/Supprimer), sélectionner l'icône Porte-documents (copier) ou l'icône de la poubelle (supprimer), puis appuyer sur ENTER. 8 Quand le message Finished! (Terminé!) s'affiche, appuyer sur ENTER. Remarque Il n'est pas possible de copier et de supprimer en même temps. Vérifier que tous les fichiers sélectionnés sont bien des fichiers à copier ou à supprimer.
Cadre photo numérique Insignia NS-DPF10A Sélection de la langue Utiliser les touches directionnelles pour sélectionner la langue du menu d'écran.
Cadre photo numérique Insignia NS-DPF10A Réglage de l’horloge Le cadre photo affiche l'heure dans le coin inférieur droit. Utiliser les touches directionnelles pour régler l'heure. Réglage de l’alarme Utiliser les touches directionnelles pour régler l'heure de l'alarme, sélectionner le nombre de sonneries souhaitées avant l'arrêt de l'alarme et activer ou désactiver l'alarme.
Cadre photo numérique Insignia NS-DPF10A Réglage des paramètres vidéo Il est possible de régler la luminosité, le contraste et la saturation des couleurs. Utiliser les touches directionnelles haut ou bas pour sélectionner l'option vidéo à régler, puis utiliser la touche directionnelle droite ou gauche pour régler l'option. Restauration des paramètres par défaut Il est possible de restaurer tous les paramètres à leur valeur d'origine par défaut.
Cadre photo numérique Insignia NS-DPF10A Modification de l'encadrement décoratif Le cadre photo numérique est doté d’encadrements décoratifs interchangeables. Pour modifier l'encadrement décoratif : 1 Retirer les quatre vis à l'arrière du cadre photo. 2 Écarter le cadre photo numérique de l'encadrement en bois. 3 Insérer le cadre photo numérique dans le nouvel encadrement en bois. 4 Replacer les quatre vis en les serrant.
Cadre photo numérique Insignia NS-DPF10A Spécifications Les spécifications sont sujettes à modification sans avis préalable.
Cadre photo numérique Insignia NS-DPF10A 42 www.insignia-products.
Cadre photo numérique Insignia NS-DPF10A Garantie limitée de six (6) mois Insignia Products (« Insignia ») garantit au premier acheteur de ce NS-DPF10A neuf (« Produit »), qu’il est exempt de vices de fabrication et de main-d’œuvre à l’origine, pour une période de 6 mois à partir de la date d’achat du Produit (« Période de garantie »). Ce Produit doit avoir été acheté chez un revendeur agréé des produits de la marque Insignia et emballé avec cette déclaration de garantie.
Cadre photo numérique Insignia NS-DPF10A • • • • • une manipulation abusive; la négligence; une utilisation commerciale; la modification de tout ou partie du Produit, y compris l’antenne; un écran plasma endommagé par les images fixes (sans mouvement) qui restent affichées pendant de longues périodes (rémanentes).
Insignia NS-DPF10A Marco digital para fotos Insignia NS-DPF10A Marco digital para fotos Contenido Bienvenido . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Información de seguridad . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Características . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Preparando su marco para fotos . . . . . . . . . . . . . . . . . . . . . . 50 Usando su marco para fotos . . . . . . . . . . . . . . . . . . . . .
Insignia NS-DPF10A Marco digital para fotos • • • • Mantenga su marco para fotos alejado de la luz del sol directa y de fuentes de calor. Proteja el cable de alimentación. Los cables de alimentación deben colocarse de manera que no se pisen ni se los aplaste con artículos colocados sobre ellos o contra ellos. Preste atención en particular al punto donde el cable se conecta al marco digital para fotos. Sólo use el adaptador de CA incluido con su marco para fotos.
Insignia NS-DPF10A Marco digital para fotos Vistas Laterales CF 4 6 7 8 9 10 SD/MMC/NS 3 5 PC 2 USB 1 11 # Componente Descripción 1 USB Conecte un dispositivo externo, tal como una cámara o una unidad de memoria flash en este puerto. 2 PC Conecte una PC en este puerto. 3 Ranura para Inserte una tarjeta de memoria SD, MS, MMC o tarjetas SD/MS/ xD-Picture en esta ranura. MMC/xD-Picture 4 CF 5 MENÚ Permite abrir o cerrar el menú de pantalla.
Insignia NS-DPF10A Marco digital para fotos # Componente Descripción 10 Interruptor de encendido Deslice para encender o apagar su marco para fotos. 11 Toma de alimentación Enchufe el cable de alimentación de CA en esta toma. Vista posterior Soporte Puede usar su marco para fotos en el modo de orientación horizontal o vertical. Para cambiar el modo: • Gire la base hasta que encaje en su lugar. • Para remover la base para montaje en pared, gire la base a la posición central y remuévala. 48 www.
Insignia NS-DPF10A Marco digital para fotos Control remoto POWER MUTE 14 1 2 3 4 5 6 7 PHOTO MUSIC MOVIE TEXT COMBO EDIT SETUP CALENDAR ESC MENU VIEW BACK MUSIC -/-UP RIGHT LEFT 8 ENTER 9 DOWN 10 11 12 13 VOL+ 15 16 17 18 19 20 21 VOL- ZOOM ROTATE REV PLAY COPY/DEL PREV FWD NEXT 22 23 24 25 26 # Botón Función 1 ENCENDIDO Permite encender o apagar su marco para fotos. 2 FOTOS Permite reproducir una presentación de diapositivas con fotografías.
Insignia NS-DPF10A Marco digital para fotos # Botón Función 10 AMPLIAR Permite a ampliar una imagen por un 20 %. 11 GIRAR Girar 90°. 12 REPRODUCIR Permite iniciar o pausar la reproducción de una presentación de diapositivas, una película o audio. 13 COPIAR/BORRAR Permite copiar archivos a, o borrar archivos de la memoria interna. 14 SILENCIAR Permite silenciar el audio. Presiónelo de nuevo para restaurar el audio. 15 TEXTO Permite visualizar un archivo de texto.
Insignia NS-DPF10A Marco digital para fotos • • Paño de limpieza Guía del usuario Para preparar su marco para fotos: 1 Conecte un extremo del cable de alimentación de CA en la toma de alimentación a un lado del marco para fotos y enchufe el otro extremo en un tomacorriente. 2 Inserte una tarjeta de memoria en la ranura apropiada. 3 Deslice el interruptor de encendido a la posición ON (Encendido).
Insignia NS-DPF10A Marco digital para fotos Para conectar un equipo externo: • Conecte un extremo del cable de USB en el puerto USB a un lado de su marco para fotos y enchufe el otro extremo en un puerto de USB en el dispositivo externo. Nota Algunos dispositivos, tales como unidades de memoria flash con USB, no requieren el uso de un cable de de USB. Usando su marco para fotos Su marco para fotos puede mostrar películas o video y puede reproducir archivos MP3.
Insignia NS-DPF10A Marco digital para fotos Reproduciendo una presentación de diapositivas Para reproducir una presentación de diapositivas: 1 En el menú principal, seleccione Picture (Imagen) y presione ENTER (Entrar). Aparece una pantalla que lista los tipos de medios que puede seleccionar. 2 Presione los botones direccionales para seleccionar el medio que tiene las imágenes que quiere reproducir y presione ENTER (Entrar).
Insignia NS-DPF10A Marco digital para fotos Reproducción de archivos MP3 Para reproducir archivos MP3: 1 En el menú principal, seleccione Music (Música) y presione ENTER (Entrar). Aparece una pantalla que lista los tipos de medios que puede seleccionar. 2 Presione los botones direccionales para seleccionar el medio que tiene los archivos de MP3 que quiere reproducir y presione ENTER (Entrar). Para acceder la memoria interna de su marco para fotos, seleccione Memory (Memoria). 3 Presione ENTER (Entrar).
Insignia NS-DPF10A Marco digital para fotos Reproduciendo una presentación de diapositivas con música Para reproducir una presentación de diapositivas con música: 1 En el menú principal, seleccione Combo y presione ENTER (Entrar). Aparece una pantalla que lista los tipos de medios que puede seleccionar. 2 Presione los botones direccionales para seleccionar el medio que tiene los archivos que quiere reproducir y presione ENTER (Entrar).
Insignia NS-DPF10A Marco digital para fotos Reproduciendo un clip de película Para reproducir un clip de película: 1 En el menú principal, seleccione Movie (Película) y presione ENTER (Entrar). Aparece una pantalla que lista los tipos de medios que puede seleccionar. 2 Presione los botones direccionales para seleccionar el medio que tiene el clip de película que quiere reproducir y presione ENTER (Entrar). Para acceder la memoria interna de su marco para fotos, seleccione Memory (Memoria).
Insignia NS-DPF10A Marco digital para fotos Viendo un archivo de texto Puede ver archivos de texto que están en el formato ASCII. Puede crear archivos ASCII en Windows Notepad. Para ver un archivo de texto: 1 En el menú principal, seleccione Text (Texto) y presione ENTER (Entrar). 2 Presione los botones direccionales para seleccionar el medio que tiene los archivos de texto que quiere ver y presione ENTER (Entrar). Para acceder la memoria interna de su marco para fotos, seleccione Memory (Memoria).
Insignia NS-DPF10A Marco digital para fotos 7 Presione COPY/DEL (Copiar/Borrar), seleccione el icono de maletín (copiar) o el icono de papelera (borrar) y presione ENTER (Entrar). 8 Cuando vea el mensaje Finished! (¡Finalizado!), presione ENTER (Entrar). Nota No puede copiar y borrar al mismo tiempo. Asegúrese de que todos los archivos que seleccione son archivos que desea copiar o borrar.
Insignia NS-DPF10A Marco digital para fotos 3 Presione los botones direccionales para ajustar la opción y presione ENTER (Entrar). Seleccionando el idioma Presione los botones direccionales para seleccionar el idioma para el menú de pantalla.
Insignia NS-DPF10A Marco digital para fotos Configurando el reloj Su marco para fotos puede mostrar la hora en la esquina inferior derecha. Presione los botones direccionales para ajustar la hora. Configurando la alarma Presione los botones numéricos para ajustar la hora de la alarma, seleccionar el número de timbrazos que escuchará cuando se active la alarma y activar o desactivar la alarma.
Insignia NS-DPF10A Marco digital para fotos Ajustando la configuración de video Puede ajustar el brillo, el contraste y la saturación de color. Presione el botón direccional arriba y abajo para seleccionar la opción de video que desea ajustar y presione el botón direccional derecho o izquierdo para ajustar la opción. Restaurando la configuración de fábrica Puede restaurar la configuración a los valores predefinidos de fábrica.
Insignia NS-DPF10A Marco digital para fotos Cambiando el marco decorativo Su marco para fotos cuenta con marcos decorativos intercambiables. Para cambiar el marco decorativo: 1 Retire los cuatro tornillos de la parte posterior de su marco para fotos. 2 Separe el marco para fotos del marco de madera. 3 Deslice el marco digital para fotos en el nuevo marco de madera. 4 Reemplace y apriete los cuatro tornillos.
Insignia NS-DPF10A Marco digital para fotos Especificaciones Las especificaciones están sujetas a cambio sin aviso previo. Función Especificación Tamaño de pantalla 10.4" Resolución 640 × 480 Entrada de alimentación de CA 100-240 V CA, 50/60 Hz Alimentación de la unidad de CC 12 V CC @ 1.
Insignia NS-DPF10A Marco digital para fotos 64 www.insignia-products.
Insignia NS-DPF10A Marco digital para fotos Garantía limitada de 6 meses Insignia Products (“Insignia”) le garantiza a usted, el comprador original de este nuevo NS-DPF10A (“Producto”), que éste se encontrará libre de defectos de material o de mano de obra en su fabricación original por un período de 6 (noventa) días a partir de la fecha de compra del Producto (“Período de Garantía”).
Insignia NS-DPF10A Marco digital para fotos • • • • • Abuso Negligencia Uso comercial Modificación de alguna parte del Producto, incluyendo la antena Un panel de pantalla de plasma dañado por la persistencia de imágenes estáticas (sin movimiento), mostradas por periodos de tiempo extendido (efecto “burn-in”).
www.insignia-products.com (877) 467-4289 Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfield, MN USA 55423-3645 © 2007 Best Buy Enterprise Services, Inc. All rights reserved. INSIGNIA is a registered trademark of Best Buy Enterprise Services, Inc. All other products and brand names are trademarks of their respective owners. Distribué par Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfield, MN USA 55423-3645 © 2007 Best Buy Enterprise Services, Inc. Tous droits réservés.