Quick Start Manual

ManualsBrandsInsignia ManualsDigital Photo FrameNS-DPF118S

Quick Setup Guide l NS-DPF118S / NS-DPF1110W 8"/10" Digital Picture Frame

Congratulations on your purchase of a high-

quality Insignia product. Your new digital picture

frame is designed for reliable and trouble-free

performance.

Package contents

• Digital picture frame

• AC power adapter

• USB cable

• Remote control with battery (CR2025)

• User Guide

• Quick Setup Guide

Features

• Adjustable stand

• Displays digital pictures (JPEG format) and

picture slideshows without a computer

• Displays pictures directly from an inserted

memory card or USB device (not included)

• Bright, clear TFT LCD screen

• Compatible with a wide variety of memory

cards, including SD, SDHC™, MMC™, Memory

Stick®, Memory Stick Pro Duo™ (requires

an adapter - not included), xD™, microSD™

(requires an adapter - not included)

• Compatible with USB  ash drives

• Mini-USB connector to connect the digital

picture frame to your computer

• Multi-image mode displays multiple pictures at

the same time in a slideshow

• Auto Rotate–pictures are rotated based on EXIF

data

• On-frame button controls and infrared remote

control

• 128 MB internal memory

Sides

# Description

1 Memory card slot (SD/SDHC/MMC/Memory

Stick/Memory Stick Pro Duo/xD/microSD)

2 USB (type A) port

3 Mini USB port

4 DC 5 V power connector. Plug the AC power

adapter in here.

Back

# Description

1 Back button—go back to the previous

selection or screen

2 Down arrow—press to navigate down

Up arrow—press to navigate up

3 Enter/Play/Pause - press to select menu items.

During a slideshow, press to pause or resume

4 Left arrow—press to move the menu selection

left or to display the previous picture

Right arrow—press to move the menu

selection right or to display the next picture

5 Menu / Standby—press to open the Setup

menu;

Press and hold down for 2 seconds to put the

frame into Sleep mode

Pressing any button on the frame or remote

will wake up the frame

6 Power On/O switch

7 Keyed slot for the stand

Setting up the remote control

• Remove the plastic tab that extends past the

bottom edge of the remote control. This tab

protects the battery. The remote control will

not work until it is removed.

Setting up the frame

1 Insert the key on the back of the stand into the

keyed slot on the back of the digital picture

frame, then turn it counterclockwise 1/4 turn to

lock it into place.

2 Turn the stand counterclockwise 90° to set the

frame in portrait orientation.

3 Plug the AC power adapter into the frame’s DC

power connector and into an AC power outlet.

4 Place the frame on a  at surface, then pull out

the lower part of the stand to adjust the frame’s

viewing angle.

Slide the power switch to the On position. The

frame turns on and automatically starts playing

a slideshow of the pictures stored in internal

memory. This slideshow is called Demo mode.

To turn o Demo mode, point the remote

control at the front of the frame and press any

button.

Viewing pictures on a memory card or

USB device

• Insert a memory card or USB device into the

available memory slot or the USB port. A

slideshow of pictures from the memory card or

USB device automatically starts to play.

Caution: Memory cards  t into the card slots in

one direction only. Do not force a memory card

into a slot. The card should  t snugly when inserted

correctly. Some cards require an adapter to  t

correctly. For more information on supported

memory cards, see “Speci cations” in the User Guide.

For more information about using your digital picture

frame, see your User Guide.

Six-month limited warranty

See the User Guide or visit

www.insigniaproducts.com for details.

trademark of BBY Solutions, Inc. Registered in some countries.

All other products and brand names are trademarks of their

respective owners.

ENGLISH 10-0586

Stand

NS-DPF1110W_10-0586_QSG_V1_EN.indd 1NS-DPF1110W_10-0586_QSG_V1_EN.indd 1 7/12/2010 4:10:46 PM7/12/2010 4:10:46 PM

FINAL

FOR PRINT