Owner's Manual

13
Insignia 1080p Digital Camcorder
www.insigniaproducts.com
Using the LED light
Your camcorder has a built-in LED light to provide
additional light in low-light settings.
To use the LED light:
1 Turn on your camcorder.
2 Turn the Mode dial to or .
3 Press the (LED light) button to turn on the
light. The (LED light icon) appears on the
LCD.
4 Aim the lens, then use standard procedures to
begin capturing photos or videos.
5 Press the (LED light) button again to turn off
the light.
Adjusting camcorder
settings
Turning Simple mode off
To turn Simple mode off:
1 Turn on your camcorder.
2 Turn the Mode Dial to SET to switch to Setup
mode. The Simple Mode screen opens.
3 Press the (up), (down), (left), or
(right) on the navigation control to
highlight the Simple mode icon, then press the
center navigation control button. The Simple
Mode screen opens.
Or,
Touch the Simple mode icon on the LCD. The
Simple Mode screen opens.
4 Press (left) or (right) the highlight
(turns off Simple mode) or (turns on
Simple mode), then press the center navigation
control button.
Or
Touch (turns off Simple mode) or (turns
on Simple mode) on the LCD.
Using the self-timer
When you turn on the self-timer, your camcorder
waits 5 or 10 seconds before taking a photo.
To use the self-timer:
1 Turn the Mode Dial to to switch to Photo
mode.
2 Press the button to view the Photo mode
menu.
3 Press (up), (down), (left), or
(right) on the navigation control to
highlight the self-timer icon or touch the
self-timer icon on the LCD.
4 Press (left) or (right) to highlight a
self-timer option, then press the center
navigation control button.
Or,
Touch a self-timer option on the LCD.
You can select for 5 seconds or for 10
seconds.
5 Press the to close the menu.
6 Use standard procedures to capture a still
image.