User Manual

9
1.7 L Electric Glass Kettle with Tea Infuser
www.insigniaproducts.com
Boil-dry protection
Should you accidentally allow the kettle to operate without water, the boil-dry protection
will automatically switch it off. If this should occur, allow the kettle to cool before filling
with cold water and re-boiling.
Cleaning and maintaining your electric kettle
Removing mineral deposits
• Mineral deposits in tap water may cause the kettle interior to discolor or “scale.” To
remove this build-up, use non-toxic liquid de-scaler or tea scale cleaning tablets.
-or-
1 Fill your kettle with three cups of white vinegar and the remainder with water and let
it stand overnight. Do not boil.
2 Empty the solution from your kettle. Remove remaining stains with a damp cloth.
3 Boil two full kettles of water, then discard the water.
Cleaning the outside
• Wipe the outside of your kettle and heating base with a damp cloth or sponge.
Cleaning the filter
Remember to clean the filter with a mild detergent and damp cloth at intervals.
Storing your kettle
• When not in use, the kettle can be kept on the heating base.
Troubleshooting
Do not try to repair your kettle yourself. Doing so invalidates the warranty. If problems
persist after you try the solutions below, contact Best Buy technical support.
CAUTIONS:
• Your tea kettle is NOT dishwasher safe - DO NOT put it in the dishwasher.
• Always unplug the power cord and let your kettle cool down completely before
cleaning.
• Never immerse your kettle, cord, or heating base in water, or let moisture come in
contact with these parts.
• Do not use chemicals, steel wool, or abrasive cleaners to clean the outside of your
kettle. These substances can scratch the surface or fade the color.
Note: Make sure that the power cord is unplugged. The power cord can be wound
around the cord storage under the base of kettle.
PROBLEM POSSIBLE SOLUTION
The kettle and indicator light do
not work when the heating base
is plugged in.
Make sure that your kettle is seated properly on the
heating base and that the base is connected to a
functioning electrical outlet.