User Manual

20
www.insigniaproducts.com
Specifications
Legal notices
FCC and IC Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
Cannot pair the
headphones
Shorten the distance between the docking station
and your headphones.
Make sure that the docking station is in pairing
mode.
Turn on the docking station, then place the
headphones onto the station. They will enter
autopairing mode (this may take 2-20 seconds).
Tip: If the power indicators on the headphones and docking
station continue to blink after 20 seconds, they are no longer
paired to each other. If this happens, follow these steps:
1 Make sure that the headphones and docking station are
within range of each other (ideally in the same room).
2 Turn off the headphones and the docking station.
3 Turn on both the headphones and the docking station.
The lights will initially blink, then they light solid blue
when connected.
Headphone dimensions
(H x W x D)
7.5 x 3.0 x 6.7 in. (191.2 x 76.8 x 171.2 mm
Docking station
dimensions (H x W x D)
8.5 x 3.8 x 4.7 in. (214.7 x 96.5 x 119.9 mm)
Input AC 100-240V~ 50/60 Hz 0.3 A
Output 5V, 500mA
Battery life Up to 10 hours
Range 33 feet (10 m)
Charging time 2 hours
Audio resolution 48 kHz @ 16 bits
Audio Source Ports Analog: RCA
Digital: Optical PCM (does not support DTS and
Dolby Audio)
Problem Solution