Quick Start Manual

ENGLISH 11-1384
Using Tuner mode
Tuner mode is the default mode on your radio and is selected when you
turn your radio on.
To tune to a station:
• Press the TUNING+/– buttons on the front of your radio momentarily
to tune to FM radio up or down. Press and hold the buttons for more
than one second to search for the next or previous station.
• Press PRESET+/– on the front of your radio to go to the next higher or
lower preset station.
Storing preset stations in memory
To store stations in memory:
1 Press SOURCE on the top of your radio to select Tuner mode.
2 Press the TUNING+/– buttons on the front of your radio to tune to the
station you want to store.
3 Press MEMORY once to store the station and the display shows
PRESET 01. (“01” ashes on the display).
4 Press PRESET+/– repeatedly until the display shows the preset
number you want to save.
5 Press MEMORY again to complete the operation.
Using HD Radio technology
To seek HD Radio stations:
• In tuner mode, press the HD SEEK+ or HD SEEK– button to seek the
next or previous HD Radio station or HD Radio multicast station radio
signal.
To listen to HD Radio broadcasts
If the station you are listening to is broadcasting a digital HD Radio signal,
, “FM,” a signal strength indicator, tuning frequency and other
information are shown on the display. If several HD Radio stations are
available on a multicast station, “HD-1” is displayed.
• To tune the radio to next or previous HD Radio station, press
TUNING+/- for less than one second. To auto tune to the next or
previous HD Radio station, press TUNING+/- for more than one
second.
• To tune to additional HD Radio stations on the multicast station, press
TUNING+/- to select HD-2, HD-3, and so on. The radio tunes to the
next higher frequency when the last HD Radio multicast station is
reached. To return to the rst multicast station (HD-1), press TUNING–.
Playing music from an external sound source
To play music from an external sound source:
1 Connect an external sound source, such as an MP3 player, by plugging
an audio cable with a 3.5 mm plug (not included) into the AUX IN jack
on the back of your radio.
2 Press SOURCE repeatedly on the top of your radio to select AUX.
“AUX” appears on the display.
3 Start playback on the external device.
4 Press VOLUME+ or – to adjust the volume.
5 Control playback using the controls on the external device.
Using headphones
• Use headphones with a 3.5 mm connector in the Headphone jack. Use
corresponding adaptors (available at your local electronics store) if you
have a dierent connector. The speakers are automatically switched o
when the headphones are being used.
Troubleshooting
Maintaining
See your User Guide for details.
Specications
See your User Guide for details.
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this
product is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interfer-
ence received, including interference that may cause undesired operation.
This equipment has been tested and found to comply within the limits for
a class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced technician for help.
FCC warning
Changes or modications not expressly approved by the party responsible
for compliance with the FCC Rules could void the user’s authority to
operate this equipment.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
90-day limited warranty
Visit www.insigniaproducts.com for details.
Contact Insignia:
For customer service, call 1-877-467-4289
www.insigniaproducts.com
© 2012 BBY Solutions, Inc. All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc.
Registered in some countries. All other products and brand names are trademarks of their
respective owners.
HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and
Foreign Patents. HD Radio™ and the HD, HD Radio, and “Arc” logos are proprietary trademarks
of iBiquity Digital Corp.
Problem:
My radio won’t turn on.
No sound.
My radio will not play in FM
mode.
FM radio reception sounds
distorted or fuzzy.
The HD Radio™ sound
keeps switching between
Digital and Analog audio.
HD Radio™ indicator keeps
turning on and o.
My radio won’t control my
MP3 player.
Solution:
• Make sure that the power cord is fully
inserted in the power outlet and rmly
connected to the DC IN jack on the
back.
• If running on batteries, make sure the
batteries are not dead.
• Make sure that power is connected and
your radio is turned on.
• Make sure that the volume is not
extremely low.
• Make sure your external device is turned
on and is playing.
• Make sure the volume on your external
device is turned up and is not set to
mute.
• Make sure that your radio is set to FM
mode.
• Make sure that the radio is correctly
tuned to an FM station.
• Make sure the FM antenna is extended.
• Extend your antenna or move your
radio closer to a window to improve
reception.
• You may be out of range of the HD
Radio stations area. Extend your
antenna or move your radio closer to a
window to improve reception.
• You need to use the controls on your
MP3 player to control playback.