User Manual

11
Tabletop FM/HD Radio Receiver
www.insigniaproducts.com
Tuning to an HD Radio multicast station
If several HD Radio stations are available on a multicast station, “HD-1” is displayed (and
remains on the display) with the station information on the top line of the display. The
station details are shown on the bottom line of the display.
To tune to additional HD Radio stations on the multicast station, press TUNING +/- or
HD SEEK+/- to select HD-2, HD-3, and so on. The radio tunes to the next higher
frequency when the last HD Radio multicast station is reached. To return to the first
multicast station (HD-1), press TUNING–.
Playing music from an external sound source
1 Connect an external sound source, such as an MP3 player, by plugging an audio cable
with a 3.5 mm plug (not included) into the AUX IN jack on the back of your radio.
2 Press SOURCE repeatedly to select AUX. “AUX” appears on the display.
3 Start playback on the external device.
4 Press VOLUME+ or to adjust the volume.
5 Control playback using the controls on the external device.
Using headphones
Connect headphones with a 3.5mm connector to the Headphone jack. The speakers are
automatically switched off when the headphones are being used.
Troubleshooting
WARNING: Listening to music at high volume for long periods of time can damage
your ears.
PROBLEM SOLUTION
My radio won’t turn
on.
Make sure that the power cord is fully inserted in the power outlet
and firmly connected to the DC IN jack on the back.
If running on batteries, make sure the batteries are not dead.
No sound. Make sure that power is connected and your radio is turned on.
Make sure that the volume is not extremely low.
Make sure that your external device is turned on and is playing.
Make sure that the volume on your external device is turned up
and is not set to mute.
My radio will not play
in FM.
Make sure that your radio is set to FM.
Make sure that the radio is correctly tuned to an FM station.
Make sure that the FM antenna is extended.
FM radio reception
sounds distorted or
fuzzy.
Extend your antenna or move your radio closer to a window to
improve reception.
The HD Radio™ sound
keeps switching
between Digital and
Analog audio. HD
Radio™ indicator
keeps turning on and
off.
You may be out of range of the HD Radio station’s area. Extend
your antenna or move your radio closer to a window to improve
reception.