User Manual
Table Of Contents
- Contents
- IMPORTANT SAFEGUARDS
- Features
- Package contents
- Assembly instructions
- STEP 1:
- STEP 2:
- STEP 3:
- STEP 4:
- STEP 5:
- STEP 6:
- STEP 7:
- STEP 8:
- STEP 9:
- STEP 10:
- STEP 11:
- STEP 12:
- STEP 13:
- STEP 14:
- STEP 15:
- STEP 16:
- STEP 17:
- STEP 18:
- STEP 19:
- STEP 20:
- STEP 21:
- STEP 22:
- STEP 23:
- STEP 24:
- STEP 25:
- STEP 26:
- STEP 27:
- STEP 28:
- STEP 29:
- STEP 30:
- STEP 31:
- STEP 32:
- STEP 33:
- STEP 34:
- STEP 35:
- STEP 36:
- STEP 37:
- STEP 38:
- STEP 39:
- STEP 40:
- STEP 41:
- STEP 42:
- Maintaining your TV stand
- Specifications
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
31
STEP 24:
You need:
When you insert a cam lock, position the open end of the lock toward the cam screw, then insert the cam screw into the
cam lock opening.
1 Insert two cam locks (DD) into the inside top edges of the left side (K), the right side (L), and the left top side of the
small divider (Y).
2 Lay the top (G) onto the left and right sides. Make sure that the cam screws fit into the cam locks,
3 Tighten all cam locks with a Phillips screwdriver.
DD Cam lock (6)
Phillips screwdriver
DD
DD
DD
DD
DD
DD