User Manual
Table Of Contents
- Contents
- IMPORTANT SAFEGUARDS
- Features
- Package contents
- Assembly instructions
- STEP 1:
- STEP 2:
- STEP 3:
- STEP 4:
- STEP 5:
- STEP 6:
- STEP 7:
- STEP 8:
- STEP 9:
- STEP 10:
- STEP 11:
- STEP 12:
- STEP 13:
- STEP 14:
- STEP 15:
- STEP 16:
- STEP 17:
- STEP 18:
- STEP 19:
- STEP 20:
- STEP 21:
- STEP 22:
- STEP 23:
- STEP 24:
- STEP 25:
- STEP 26:
- STEP 27:
- STEP 28:
- STEP 29:
- STEP 30:
- STEP 31:
- STEP 32:
- STEP 33:
- STEP 34:
- STEP 35:
- STEP 36:
- STEP 37:
- STEP 38:
- STEP 39:
- STEP 40:
- STEP 41:
- STEP 42:
- Maintaining your TV stand
- Specifications
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
49
STEP 42:
You need:
1 Insert one screw through one hole on each bracket and into the left and right holes on the top of the back. Tighten the
screws with a Phillips screwdriver.
2 Insert two screws through the two holes on each bracket and into the wall stud. Tighten the screws with a Phillips
screwdriver.
3 Pull the plastic strap on each bracket to secure your TV stand to the wall. Tighten the screws with a Phillips screwdriver.
WARNING: You must install the tip restraint hardware to help prevent any accidents or damage to your TV stand.
We strongly recommend attaching the tip restraint hardware to a wall stud and your stand. For all other wall types, visit your local
hardware store to obtain the correct hardware.
UU Anti-tip bracket with
plastic strap (2)
Phillips screwdriver
7
i
n
.
(
1
8
c
m
)
7
i
n
.
(
1
8
c
m
)
Wall stud