User Manual
Table Of Contents
- Contents
- IMPORTANT SAFEGUARDS
- Features
- Package contents
- Assembly instructions
- STEP 1:
- STEP 2:
- STEP 3:
- STEP 4:
- STEP 5:
- STEP 6:
- STEP 7:
- STEP 8:
- STEP 9:
- STEP 10:
- STEP 11:
- STEP 12:
- STEP 13:
- STEP 14:
- STEP 15:
- STEP 16:
- STEP 17:
- STEP 18:
- STEP 19:
- STEP 20:
- STEP 21:
- STEP 22:
- STEP 23:
- STEP 24:
- STEP 25:
- STEP 26:
- STEP 27:
- STEP 28:
- STEP 29:
- STEP 30:
- STEP 31:
- STEP 32:
- STEP 33:
- STEP 34:
- STEP 35:
- STEP 36:
- STEP 37:
- STEP 38:
- STEP 39:
- STEP 40:
- STEP 41:
- STEP 42:
- Maintaining your TV stand
- Specifications
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
7
Assembly instructions
STEP 1:
You need:
1 Separate the CL and CR parts of the rail assembly (BB) from the DL and DR parts and set the DL and DR parts aside for
use in another step.
2 Insert three 3 × 12 mm screws (AA) into the correct holes on the CL and CR parts of the rail assembly (BB).
3 Align the CL part of the rail assembly (BB) to the inside of the left divider panel (B). Make sure that the wheel on the
assembly is at the back of the panel.
4 Tighten the screws with a Phillips screwdriver.
5 Align the CR part of the rail assembly (BB) to the inside of the right divider panel (C). Make sure that the wheel on the
assembly is at the back of the panel.
CR
DR
DL
CL
AA 3 × 12 mm
screw (6)
BB Left and right rail assembly (2)
B Left divider
panel (1)
C Right divider
panel (1)
Phillips screwdriver
AA AA AA
BB
AA
AA
AA
CL