User Manual

13
2.0 Channel Soundbar
www.insigniaproducts.com
You can also choose a USB thumb-drive or Bluetooth device as your sound source.
See Connecting to USB on page 15, or Connecting to Bluetooth on page 15.
Connecting to HDMI (Best)
1 Connect one end of an HDMI cable (not included) to the HDMI ARC jack on
your soundbar.
2 Plug the other end into the ARC jack on your source device.
3 Make sure that your TV’s output settings are correct:
a. Turn on your TV’s CEC and ARC audio control functions (typically found in
system or HDMI settings).
b. Change your TV’s audio output to the PCM format (typically found in audio
settings).
See the documentation that came with your TV or check its service support for
more information.
4 Press the button on your soundbar or the SOURCE button on the remote
control repeatedly until the source indicator turns white.
Connecting to digital optical (Better)
1 Remove the caps of the both ends of the optical cable.
2 Connect one end of the included digital optical cable to the OPTICAL jack on
your soundbar.
3 Connect the other end into the Digital Optical Output jack on your source
device.
4 Change the device’s audio output to the PCM format (typically found in audio
settings). See the documentation that came with your audio source device for
more information.
Note: HDMI ARC and CEC technology let you control your soundbar with your
TV remote.
Audio source (TV)
HDMI cable (not included)
Back of your soundbar