User Manual

15
TV Console for up to 75" TVs
www.insigniaproducts.com
Step 10: Attach the back panel to the assembled console frame
1 Go back and tighten all cam locks and screws. Make sure that all the parts are tight and there are no gaps
between the pieces. This will help keep the unit square.
2 Turn the assembled unit over so that its back is facing up.
3 Unfold the back panel (J) and align its holes with the pilot holes along the edges of the assembled unit.
4 Use the washer head screws (T) to secure the back panel to the assembled unit. Tighten the screws using a
Phillips screwdriver.
You’ll need:
Phillips screwdriver
T (22)