User Manual

17
TV Console for up to 75" TVs
www.insigniaproducts.com
Step 12: Attach doors to the vertical panels
1 Push the knob bolts (Y) through the inside of each door (L), then screw on the knobs (X).
2 Attach a door (L) to the right side panel (C) by engaging both door hinges together as shown:
A Extend both hinges of the door (L) to the open position, if needed.
B Slide the back hooks (on the door hinges) into the slots on the ends of the mounting bases.
C Once the back hooks are inserted into place, push in the back of the hinge arm to secure it to the mounting
base.
D Repeat the same process to attach the other doors (L) to left side panel (B) and partition panel (D).
Tip: If you need to remove a door, press the release lever on the end of the hinge arm.
3 Open and close the doors to make sure they are aligned and shut correctly. If necessary, adjust the screws on
the hinge arm for a better fit.
You’ll need:
Release lever
Mounting base
Hinge arm
Push in the back of the
hinge arm
Hooks
Slot
X (4)
Phillips screwdriver
Y (4)