User Manual

20
NS-HWG1965
www.insigniaproducts.com
Step 15: Change the door panel
Follow these steps if you want to change your TV stand’s door panels from glass to wood. Otherwise, skip
to “Step 16: Position the TV stand and install the tipping restraint hardware kit” on page 21.
1 Open a door (L) and loosen the screws on the inside of the door frame.
2 Rotate the clips to remove the old panel.
3 Insert the new panel, then rotate the clips and tighten the screws to secure the panel in the door frame.
4 Repeat this process to replace all the door panels.
You’ll need:
Glass door
panel
Wood door
panel
Clip
Phillips screwdriver