User Manual

5
TV Console for up to 75" TVs
www.insigniaproducts.com
INSTALLATION TIPS
Gluing wood dowels (N)
When using a wood dowel (N), put one drop of glue (CC) in the hole before you insert the wood dowel (N). Insert
the wood dowel (N), then gently tap it with a rubber mallet to secure it in place.
Locking cam pins (P) and cam locks (Q)
1 One end of a cam pin (P) is threaded so that it screws into place. The other end is not threaded. Before you insert
the un-threaded end into a hole, insert a cam lock (Q) into the hole and make sure that the hole in the cam lock
(Q) faces the outside edge of the part being used.
2 Insert the un-threaded end of the cam pin (P) through the hole in the part being used and into the cam lock
hole, then rotate the cam lock (Q) clockwise with a screwdriver to lock the cam pin (P) into place.
3 Insert a cam lock cover (V) into the cross slot of the cam lock (Q) to conceal.
312 4
X
FINAL
GL
U
E
Cam pin
Pre-drilled hole Cam lock Cam lock
cover
LOCKED
PANEL
PANE L