USER GUIDE Zero Gravity Full Body Massage Chair NS-MGC300BK1 / NS-MGC300BN2 Before using your new product, please read these instructions to prevent any damage.
Contents IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Zero Gravity Full Body Massage Chair IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using (this appliance) DANGER-To reduce the risk of electric shock: • Always unplug this appliance from the electrical outlet immediately after using and before cleaning. • Keep dry – Do not operate in wet or moist conditions. WARNING - Risk of collapse and serious injury. Maximum load 330 lbs. (150 kg).
GROUNDING INSTRUCTIONS This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord that has an equipment grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Zero Gravity Full Body Massage Chair MAINTENANCE TO STORE Place massage chair in its box or in a safe, dry, cool place. Avoid contact with sharp edges or pointed objects which might cut or puncture the fabric surface. To avoid breakage, do not wrap the power cord around the unit. Do not hang the unit by the hand control cord. TO CLEAN Unplug the unit and allow it to cool before cleaning. Clean only with a soft, slightly damp sponge.
Components Left Head cushion Upper arm air pressure component Arm air pressure component Back cushion Remote control Seat cushion Arm rest Calf rest frame Armrest decoration Footrest frame Side cover Calf baffle plate 6 www.insigniaproducts.
Zero Gravity Full Body Massage Chair Right Back cover Velcro Remote control pocket PCB box cover Wheel Power cord Fuse box Power cord socket Remote control socket Power switch For more information, see the Quick Setup Guide. www.insigniaproducts.
Remote control # ITEM DESCRIPTION 1 Display Shows the current settings for your chair. 2 8 (power) Turns all massage functions on or off. 3 Pause Stops or starts massage functions. See Using other custom massage options on page 15. 4 Times Sets the amount of time you want your chair to massage. Each press adds five minutes. The maximum time is 30 minutes. See Setting the timer on page 14. 5 Zero G/Adjust Selects a reclining position. You can select one of three reclining positions.
Zero Gravity Full Body Massage Chair # ITEM DESCRIPTION 8 Air On/Off Turns the air pressure function on or off. See Selecting an air pressure mode on page 15. 9 Manual Massage Sets various massage settings to create a custom massage mode. See Creating an upper body custom massage mode on page 13. 10 Foot Roller Turns the foot roller function on or off or adjusts the intensity of the foot roller. 11 the shoulder massage balls for maximum Shoulder Position Adjusts comfort. Up raises the balls.
• The outlet must be correctly installed and grounded in accordance with all local codes and ordinances. 3-prong plug and outlet Grounding adapter 3-prong receptacle Grounding lead Screw Receptacle 3-prong plug Receptacle box cover Grounding adapter Receptacle box cover Choosing a location CAUTION: • Do not move your chair with its wheels on a wood floor, rough ground, or in a narrow space. • Two people are required to lift the chair.
Zero Gravity Full Body Massage Chair Moving your chair 1 2 3 4 Turn off your chair, then unplug the power and remote control cords. Make sure that the cords are out of the movement path. Tilt your chair back. The center of gravity should be on the wheels. Push or pull your chair to the new location, then gently lower your chair. Plug the power cord and remote control cable back in. Attaching or removing the cushions Your chair has removable head and backrest cushions.
Using your massage chair Running the initial body scan 1 2 3 4 Plug the power cord into a grounded power outlet. Extend the footrest to accommodate your leg length, if needed. Press the (power) button. Your chair does a body scan and tests your shoulder position and massage points. When the scan is complete, the shoulder position icon appears on the display and your chair beeps.
Zero Gravity Full Body Massage Chair Selecting an auto massage mode Your chair has six preprogrammed massage modes. • Sit in your chair, then press one of the massage mode buttons. You can press: BUTTON DESCRIPTION REMOTE DISPLAY Comfort Loosens the muscles. F1 Auto Relax Deep-tissue massages key F2 Auto acupressure points to relax sore areas. Energy Combines airbags and tactics for a full body massage to awaken the body and help restore body energy.
4 Press Fixed Point one or more times to adjust the vertical hand motion. You have five hand motions to choose from. CONTROL REMOTE DISPLAY The massage hand stays in fixed position. The massage hand moves up and down in a partial position. The massage hand moves up and down on the full back. The massage hand moves up and down on the back and shoulder area. The massage hand moves up and down on the back and waist area.
Zero Gravity Full Body Massage Chair Selecting an air pressure mode Your chair uses airbags to squeeze, then release, muscles in your arms, legs, and feet to release muscle tension and improve blood flow. 1 Press Air On/Off one or more times to select an air pressure mode. AIR PRESSURE MODE REMOTE DISPLAY Full air pressure massages the arms, legs, and feet. The air pressure massage focuses on the arms. The air pressure massage focuses on the legs and feet.
Troubleshooting CAUTION: Use extreme caution with children. Your chair should not be accessible to child's play. Note: If you run into unexpected problems with your massage chair, unplug the power cord, wait 30 seconds, then plug it back in. If you still experience issues, such as error codes, contact Insignia Customer Support at 1-877-467-4289 or visit www.insigniaproducts.com . ERROR CODE PROBLEM E1 01 The massage hand up and down switch has malfunctioned.
Zero Gravity Full Body Massage Chair ERROR CODE PROBLEM SOLUTION E7 01 Heating control tube is overloaded. • Replace temperature control tube. Replace the heating wire. Specifications Dimensions (H × W × D) 38.4 × 29.5 × 64.6 in. (97.5 × 75 × 164 cm) Weight 187.4 lbs (85 kg) Rated voltage 110-120 V~60 Hz,1.8 A Default working time 20 minutes Rated power 130 W Power cord 6.8 ft. (206 cm) Remote control cord 6.2 ft.
ONE-YEAR LIMITED WARRANTY Definitions: The Distributor* of Insignia branded products warrants to you, the original purchaser of this new Insignia-branded product (“Product”), that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”).
• • • • • • • • Damage due to incorrect operation or maintenance Connection to an incorrect voltage or power supply Attempted repair by any person not authorized by Insignia to service the Product Products sold “as is” or “with all faults” Consumables, including but not limited to batteries (i.e. AA, AAA, C, etc.
www.insigniaproducts.com 1-877-467-4289 (U.S. and Canada) INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2021 Best Buy. All rights reserved.
