Quick Start Guide

GETTING STARTED
Complete the following steps to launch the software on
each Windows or Mac computer that you are
connecting. For instance, if you connect a PC to a Mac,
follow the PC setup steps on your PC and the Mac
setup steps on your Mac.
LAUNCHING THE SOFTWARE ON
WINDOWS PCS SmartDatalink SOFTWARE
Note: If your computer has a USB-C port, attach the USB-C
adapter before you connect the cable.
1 Connect the cable from one computer to the other.
The software detects the connection. Connecting for
the rst time may take a few minutes.
2 After installing, SmartDatalink runs automatically,
then you can start to transfer your le. If Autoplay
does not open, go to MyComputer, then double-click
SmartDatalink.exe.
PACKAGE CONTENTS
• USB 3.0 universal le transfer cable
• USB to USB-C adapter
• Quick Setup Guide
SYSTEM REQUIREMENTS
• Windows® 10
• macOS 10.12 or later
• USB or USB-C port
FEATURES
• A simple way to transfer les between most
computers.
• 5 Gbps transfer speed quickly and easily transfers
data between computers
• Plug and play design requires no additional
software for easy setup
• USB to USB-C adapter lets you connect to standard
USB ports
• 6 ft (1.8 m) cable reaches between your devices
OVERVIEW
Note: This cable is not for charging or transferring data from a
smart phone to computer.
OR
If an Accessibility box opens:
A Click the System Preferences button to open the
Accessibility Settings window, click the lock icon in
the lower left corner to unlock your system
preferences, then enter your computer’s User
Name and Password.
B Make sure that MacKMLink option is
checked.
C If the previous version of MacKMLink is
checked, uncheck then recheck it.
D Make sure that MacKMLinkShell is selected,
then close the Security & Privacy window.
LAUNCHING THE SOFTWARE ON MAC
COMPUTERS (U3MacKMLink SOFTWARE)
1 Connect the cable from one computer to the other.
The software detects the connection.
2 The U3MacKMLink app runs automatically. If
U3MacKMLink doesn’t run automatically, open the
Smartlink disc icon on the desktop of your Mac.
Before using your new product,
please read these instructions to prevent any damage.
LAUNCHING THE SOFTWARE ON MAC
COMPUTERS (MacKMLink Software)
1 Connect the cable from one computer to the other.
The software detects the connection.
2 The MacKMLink app runs automatically. If
MacKMLink doesn’t run automatically, open the
Smartlink disc icon on the desktop of your Mac.
3 Double click MacKMLink.app to install.
4 If a window opens:
A Click the Open System Preferences button.
QUICK SETUP GUIDE
USB File
Transfer Cable
NS-PCK336C
Final at size: 16.5 × 5.5 in. (419.1 × 139.7 mm)
Final fold size: 2.75 × 5.5 in. (69.85 × 139.7 mm)
B In the Security and Privacy window, make sure that
Accessibility is selected.
C Click Click the lock to prevent further changes,
enter your User Name and Password, then click
Unlock.
D Make sure that MacKMLinkShell is selected, then
close the Security & Privacy window.
USB to USB-C adapter
Transfer cable
NS-PCK336C_21-0344_QSG_V2_EN.ai 1 4/22/2021 4:01:15 PMNS-PCK336C_21-0344_QSG_V2_EN.ai 1 4/22/2021 4:01:15 PM