Portable DVD Player User Guide

7
Insignia NS-PDVD9 Portable DVD Player
www.insignia-products.com
Setting up your portable
DVD player
Installing the rechargeable battery pack
Your player uses a long-life Ni-Mh battery pack
for a portable power supply. Ni-Mh batteries
feature high storage capacity.
If you plan not to use the battery for an extended
period of time (one week or longer), we
recommend that you fully charge the battery,
then remove and store it. For longer periods of
storage, recharge the battery at least once every
two months to maintain the battery in optimum
condition. Under no circumstances should you
short the battery terminals, store the battery in a
metal container, or leave the battery in a humid
or damp environment. Store the battery in an
airtight container with desiccant or another
dehumidifying agent. Each full recharge takes
approximately five-hours. One full charge can
provide power to the player for at least 2.5 hours.
During recharge, the red battery recharge
indicator on the right side of the player stays on.
Once fully recharged, the indicator turns off. At
this point you may disconnect the wall plug and
stop charging the battery.
Precautions related to recharging the battery:
• After the battery is fully discharged,
immediately recharge it (even if you plan to
not use your battery) in order to maximize
battery life.
• Remove the battery from the player and store
it correctly if the player is not to be used for
long time. During this period, recharge the
battery at least once every two months to
avoid irreparable damage to the battery.
To charge the battery pack:
1 Connect the AC to DC adapter to your DVD
player.
2 Slide the POWER switch to the OFF position.
To install the battery pack:
1 Slide the POWER switch to the OFF position.
2 Disconnect the AC to DC adapter from your
DVD player.
3 Close the LCD panel.
4 Slide the battery into the back of your player
until it locks into position. The battery is
locked if you hear a click and the battery fits
snugly to the player.
To remove the battery pack:
1 Slide the POWER switch to the OFF position.
2 Disconnect the AC to DC adapter from your
DVD player.
3 Press the button on the side of the battery.
4 Pull the battery out of the back of your player.
Installing your player in an automobile
To install your player in an automobile:
1 Plug one end of the cigarette lighter adapter
into the DC input jack on the DVD player.
2 Plug the other end of the cigarette lighter
adapter into your automobile’s cigarette
lighter socket.
Installing your player in your home
To install your player in your home:
1 Plug one end of the AC to DC adapter into
the DC input jack on the side of the DVD
player.
2 Plug the other end of the AC to DC adapter
into a 100~240V AC power receptacle.
12 Stop Press once to stop playback.
The player remembers
where you stopped playback
and you can restart playing
at this point.
Press twice to stop
playback. The player does
not remember where you
stopped playback.
13 Numbers Use to select an item in a
menu or enter a password.
14 Setup Enter or exit the setup menu.
15 Menu Show the DVD root menu.
16 Repeat Repeat playing the title,
chapter, or track.
17 Skip - Go to the previous chapter,
track, or scene during
playback.
18 Skip + Go to the next chapter, track,
or scene during playback.
19 Play/Pause Start playback or pause
playback.
20 Title Show the DVD title menu.
Note
Charge the battery for at least eight hours prior to first use.
Item Button Description
Note
Make sure you use the AC to DC adapter included
with the player to recharge your battery. The
cigarette adapter cannot be used to recharge the
battery.