User Manual

Ultrabook Charger
7
www.insigniaproducts.com
Why doesn't the tip fit into my Ultrabook?
If the tip does not appear to fit into your Ultrabook you may have selected
the incorrect tip for your Ultrabook. The tip should fit snugly inside the DC
input jack on the side or back of your Ultrabook. If the tip does not fit into
the jack, do not force the tip. Confirm you have selected the correct tip for
your Ultrabook by visiting the Tip Wizard at http://bbyurl.us/tipfinder. If
you need additional assistance, or if you need a tip that isn’t included in
the package, please contact Insignia customer service at [phone].
Will using an incorrect tip damage my Ultrabook?
The tips are designed to be used with specific Ultrabooks and so you
should only use the tip that is designated specifically for your Ultrabook.
The correct tip can be identified by using the online Tip Wizard at http://
bbyurl.us/tipfinder.
The use of an incorrect tip may cause performance issues, including the
inability to charge the internal battery or power the Ultrabook, or the
display of an error message on the Ultrabook screen. It is also possible that
the use of an incorrect tip could damage your Ultrabook. For these
reasons, it is necessary to use the tip designed specifically for your
Ultrabook.
My Ultrabook uses less than 65 watts (e.g. 40 watts). Will this
charger damage my Ultrabook?
No, using this charger will not damage your Ultrabook. This charger only
supplies as much power as required by the Ultrabook, up to a maximum
of 65 watts.
My Ultrabook uses more than 65 watts (e.g. 90 watts). Will
this charger damage my Ultrabook?
This is a 65 watt charger and it should not be used with any computer that
requires more than 65 watts. Using with a computer that uses more than
65W can damage your charger.
I notice that the charger is warm when I use it. Is this a
problem?
During standard operation the charger body may feel warm, and this is
normal. The charger should always be placed in a ventilated area in order
to prevent over-heating.