User Manual
Table Of Contents
- Before you begin
- IMPORTANT SAFETY INSTRUCTIONS
- ANTI-TIP DEVICE
- IMPORTANT SAFETY PRECAUTIONS
- IN THE COMMONWEALTH OF MASSACHUSETTS
- ELECTRICAL WARNINGS
- GROUNDING INSTRUCTIONS
- INSTALLATION WARNINGS
- SURFACE BURNER WARNINGS
- OVEN WARNINGS
- SAVE THESE INSTRUCTIONS
- Features
- Installing
- Selecting a location
- Gas requirements
- Electrical requirements
- Installing your gas range
- Important notes to the installer
- Before installing your range
- Connecting to gas
- Optional: Converting to LP gas
- Installing the anti-tip device
- Placing your range and connecting to power
- Leveling your range
- Assembling the top burners
- Installing the burner knobs
- Installing the oven door handle
- Installing the plastic pads
- Checking the ignition of the burners
- Using
- Before you begin using your range
- Using the surface burners
- Using the oven
- Using the oven vent
- Using the oven light
- Positioning the oven racks
- Tips for baking
- Setting the clock
- Selecting the 12-hour or 24-hour display setting
- Using the timer
- Baking
- Adjusting the thermostat
- Convection baking and roasting
- Using Air Fry
- Programming the cook time
- Programming a delayed start time
- Broiling
- Keeping food warm
- Switching between Fahrenheit or Celsius
- Turning sound on or off
- Locking oven controls
- Maintenance
- Cleaning and maintaining
- Cleaning the control panel
- Cleaning stainless steel surfaces
- Cleaning the oven racks
- Cleaning the oven door
- Cleaning the surface burner control knobs
- Cleaning surface burner grates and assemblies
- Cleaning the cooktop
- Removing and replacing the oven door
- Removing and replacing the storage drawer
- Self-cleaning the oven
- Steam cleaning the oven
- Troubleshooting
- Specifications
- ONE-YEAR LIMITED WARRANTY
- Cleaning and maintaining
www.insigniaproducts.com
23
4.8 Cu. Ft. Gas Convection Range with Self Clean and Air Fry
4 Position an oven rack in the center rack position. Check the level of your range with a carpenter level using the two
positions.
5 After your range is level, make sure that the rear leg is under the anti-tip device. See Installing the anti-tip device
on
page 21.
Assembling the top burners
1 Position surface burner heads on top of the surface burner manifolds. The electrodes fit into the slots in the bottom of
the heads. Make sure that the surface burner heads are flat and parallel with the cooktop.
2 Place the matching size cap on top of each surface burner head.
3 Place the grates on the cooktop.
CAUTION: Don’t operate the surface burners without all burner parts in place.
Oven racks
Burner cap
Burner head