User Manual
Table Of Contents
- Before you begin
- IMPORTANT SAFETY INSTRUCTIONS
- ANTI-TIP DEVICE
- IMPORTANT SAFETY PRECAUTIONS
- IN THE COMMONWEALTH OF MASSACHUSETTS
- ELECTRICAL WARNINGS
- GROUNDING INSTRUCTIONS
- INSTALLATION WARNINGS
- SURFACE BURNER WARNINGS
- OVEN WARNINGS
- SAVE THESE INSTRUCTIONS
- Features
- Installing
- Selecting a location
- Gas requirements
- Electrical requirements
- Installing your gas range
- Important notes to the installer
- Before installing your range
- Connecting to gas
- Optional: Converting to LP gas
- Installing the anti-tip device
- Placing your range and connecting to power
- Leveling your range
- Assembling the top burners
- Installing the burner knobs
- Installing the oven door handle
- Installing the plastic pads
- Checking the ignition of the burners
- Using
- Before you begin using your range
- Using the surface burners
- Using the oven
- Using the oven vent
- Using the oven light
- Positioning the oven racks
- Tips for baking
- Setting the clock
- Selecting the 12-hour or 24-hour display setting
- Using the timer
- Baking
- Adjusting the thermostat
- Convection baking and roasting
- Using Air Fry
- Programming the cook time
- Programming a delayed start time
- Broiling
- Keeping food warm
- Switching between Fahrenheit or Celsius
- Turning sound on or off
- Locking oven controls
- Maintenance
- Cleaning and maintaining
- Cleaning the control panel
- Cleaning stainless steel surfaces
- Cleaning the oven racks
- Cleaning the oven door
- Cleaning the surface burner control knobs
- Cleaning surface burner grates and assemblies
- Cleaning the cooktop
- Removing and replacing the oven door
- Removing and replacing the storage drawer
- Self-cleaning the oven
- Steam cleaning the oven
- Troubleshooting
- Specifications
- ONE-YEAR LIMITED WARRANTY
- Cleaning and maintaining
www.insigniaproducts.com
24
Installing the burner knobs
Your range may have a “KD Knob + handle design” that you need to install.
1 Check all five knobs.
2 Push each knob in all the way to fully attach the shaft and make sure that each knob is easy to rotate.
Installing the oven door handle
You range may have a “KD handle” that you need to install.
1 Check your installation kits for the handle and hex wrench.
2 Make sure that the side with the screw holes faces towards the oven door.
3 Place the door handle against the oven door and fit it on the connection part.
4 Use the Allen wrench to tighten both sides of the door handle.
Handle
Screw
hole
Hex wrench