INSTALLATION GUIDE 91" Projector Kit NS-SCR79KIT Before using your new product, please read these instructions to prevent any damage.
Contents IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NS-SCR79KIT IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS. WARNING: THIS IS NOT A TOY! THIS PRODUCT CONTAINS SMALL PARTS WHICH COULD CAUSE CHOKING IF SWALLOWED. FOR INDOOR OR OUTDOOR USE WITH COVER. DO NOT EXPOSE THE PROJECTOR OR REMOTE CONTROL TO RAIN OR OTHER WET CONDITIONS. DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. IF SERVICING IS NEEDED, SEND TO QUALIFIED SERVICE PERSONNEL.
Components Top NO. DESCRIPTION 1 (menu) Press to open or close the menu. 2 (source) Press to select an external video device. 3 (return) Press to go back to the previous screen. 4 Lens Projects the image onto the screen. 5 Focus wheel Turn to focus the image on the screen. 6 Keystone wheel Turn to adjust the vertical position of the image on the screen by ± 15°. 7 (left) Press to decrease the volume. In menus, press to move left. 8 (up) In menus, press to move up.
NS-SCR79KIT Back Remote control sensor USB ports AV jack HDMI jacks Headset jack VGA jack Sides Power jack Air inlet vent Air outlet vents CAUTION: Do not block the vent openings. Your projector may overheat and be damaged. www.insigniaproducts.
Remote control NS-6CR79KIT NO. COMPONENT 1 (power) Press to turn your projector on and off. 2 (fast rewind) Press to fast rewind video from an external device. 3 OK DESCRIPTION Press to confirm menu selections. 4 (return) Press to go back to the previous screen. 5 (volume down) Press to decrease the volume. 6 (mute) Press to mute or unmute the sound. 7 (play/pause) Press to start or pause playback. 8 (fast forward) Press to fast forward video from an external device.
NS-SCR79KIT Setting up your projector kit 1 Place the carrying case on a flat surface with the logo facing upward. 2 Open the carrying case, then remove the foam packaging that holds all the parts. Foam packaging 3 Pull up the two bottom poles. These poles are hinged and permanently attached to the carrying case. Bottom pole Bottom pole 4 Insert one A pole into both ends of the bottom poles. Note: The A, B, C, and D poles are labeled for easy identification. www.insigniaproducts.
5 Insert a B pole into each A pole. 6 Insert an A pole into each B pole. 7 Insert a D pole into one C pole. 8 www.insigniaproducts.
NS-SCR79KIT 8 Slide the sleeve at the top of the screen over the D and C pole combination. Sleeve 9 Insert the other C pole into the end of the D pole. 10 Slide the ends of the C poles onto the ends of the A poles. www.insigniaproducts.
11 To secure the screen to the poles, insert a bungee cord through the grommet on the screen, wrap it around the pole, then insert the plastic ball through the loop on the cord. Attach the other five cords. Bungee cord A B 12 To secure the screen to the ground, attach the hook at one end of the string to the hole midway up the B poles. (We recommend that you attach to the holes furthest up the pole.) Attach the hook at the other end of the string to the ground stake.
NS-SCR79KIT Connecting devices Connecting an HDMI device • Plug the included HDMI cable into one of the HDMI jacks on the back of your projector and the HDMI OUT jack on your HDMI device. Connecting a USB device USB • Connect your USB device to one of the USB ports on the back of your projector. www.insigniaproducts.
Connecting an A/V device • Plug an A/V cable into the A/V jack on the back of your projector and into the A/V jacks on your device. Connecting headphones • Plug your headphones (not included) into the headphone jack on the back of your projector. Connecting a speaker system • Plug an audio cable (not included) into the headphone jack on the back of your projector and into the left and right audio jacks on your speaker system. 12 www.insigniaproducts.
NS-SCR79KIT Connecting a Bluetooth speaker (wire connection) 1 Connect the included audio cable to the headphone jack on the back of your projector and to the headphone jack on the Bluetooth speaker. 2 Press (power) on the speaker to turn on the speaker. Note: You can use the included USB charging cable to charge a Bluetooth speaker. Connecting a VGA device • Plug the VGA cable (not included) into the VGA jack on your projector and into the VGA jack on your device.
Positioning your projector You can use your projector both indoors and outdoors (under a cover). • Place your projector 8 ft. (2.5 m) from the screen and at a height of 4ft. (1.2 m) to use the full screen. • Turn the keystone wheel on the front of your projector or the adjustment screw on the bottom of your projector to adjust the projected image angle by ± 15 degrees. • For best results, use your projector in a dark environment. Screen 8 ft. (2.
NS-SCR79KIT Selecting VGA • Press or to select VGA, then press OK. Selecting HDMI • Press or to select HDMI1 or HDMI2, then press OK. Selecting AV • Press or to select AV, then press OK. Selecting USB 1 Press or to select USB1 or USB2, then press OK. 2 Press or to select PHOTO to view JPG image files or MUSIC to listen to MP3 music files, then press OK. Note: Your projector only plays JPG or MP3 files. www.insigniaproducts.
Adjusting the picture 1 Make sure that both your projector and video device are turned on. 2 Turn the focus wheel on the front of your projector to adjust the focus. 3 Press (menu) on the remote or (menu) on the top of your projector. The PICTURE menu opens. Reduce Display size 100% 4 Press or to select Picture Mode, press or to select the picture mode, then press OK. You can select Soft, User, Vivid, or Medium. The option menu that opens varies based on the picture mode you selected.
NS-SCR79KIT Adjusting the tint 1 Press (menu) on the remote or (menu) on the top of your projector. The PICTURE menu opens. 2 Press or to select Tint, then press or to adjust the tint, then press OK. 3 Press or to close the menu. Adjusting the color temperature 1 Press (menu) on the remote or (menu) on the top of your projector. The PICTURE menu opens. 2 Make sure that the Picture Mode is set to User. See Adjusting the picture on page 16.
3 Press or to select Noise Reduction, then press OK. Reduce Display size 100% 4 Press or to select a noise reduction option, then press OK.. You can select Off, Low, Middle, High, or Default. 5 Press or to close the menu or press to return to the option list. Adjusting the display size 1 Press (menu) on the remote or (menu) on the top of your projector. The PICTURE menu opens. 2 Make sure that the Picture Mode is set to User. See Adjusting the picture on page 16.
NS-SCR79KIT 4 Press or to close the menu or press to return to the option list. Note: To adjust the other sound options, you must set Sound Mode to User. The other picture modes are preset and can’t be changed. Adjusting the treble or bass 1 Press (menu) on the remote or (menu) on the top of your projector. The PICTURE menu opens. 2 Press or to select Treble or Bass, press or to adjust the option, then press OK. 3 Press or to close the menu or press to return to the option list.
3 Press or to select Sleep Timer, then press OK. Sleep Timer 6 OH HS W LP HU 2II Sleep Timer Off 40min 5min 50min 60min 10min 15min 7 , 0( 20min 30min BACK BACK 4 Press or to select the sleep timer time, then press OK. You can select Off, 5min, 10min, 15min, 20min, 30min, 40min, 50min, or 60min. 5 Press or to close the menu or press to return to the option list. Selecting the OSD language 1 Press (menu) on the remote or (menu) on the top of your projector. The PICTURE menu opens.
NS-SCR79KIT 3 Press or to select Rotate, then press OK one or more times to select how you want the picture to rotate. You can select Rotate 0, Rotate 1, Rotate 2, or Rotate 3. 2 37 , 21 4 Press or 26' /DQJXDJ 26 /DQJXDJH (QJOLV (QJOLVK 5H VW RUHH )D FWR U\\ 'HI DX OW + ' 0, 0 , & &(& 5 R W D W H 26 ' ' XUD WL RQQ 2II 6R IWZ DU H 8SGD W H 86 % 2 37 ,2 1 K V L O J Q ( H J D X J Q D / ' 6 2 W O X D I H ' \ U R W F D ) H U R W V H 5 &(& ,0'+ H W D W R 5 I I 2 Q R L W D U X ' ' 6 2 % 6 8 H W
Legal notices FCC ID The FCC ID for the included Bluetooth speaker is HBONSSONIC20. FCC statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any inference received, including interference that may cause undesired operation.
NS-SCR79KIT ONE-YEAR LIMITED WARRANTY Definitions: The Distributor* of Insignia branded products warrants to you, the original purchaser of this new Insignia-branded product (“Product”), that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”).
For product inquiries, please contact us with the information below: 1-877-467-4289 www.insigniaproducts.com INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2021 Best Buy. All rights reserved.
