User Manual

www.insigniaproducts.com
10
11 To secure the screen to the poles, insert a bungee cord through the grommet on the screen, wrap it around the pole,
then insert the plastic ball through the loop on the cord. Attach the other five cords.
12 To secure the screen to the ground, attach the hook at one end of the string to the hole midway up the B poles. (We
recommend that you attach to the holes furthest up the pole.) Attach the hook at the other end of the string to the
ground stake. Repeat until all four strings are attached to the poles and stakes. Step firmly on the stakes to insert into
the ground. Make sure that the strings are taut and there is no slack.
Note: If you are using your projector on a solid surface (like concrete) or inside, you don’t need to do the next step.
CAUTION: Always take the weather into consideration when setting up. Take your projector and screen down under severe weather
conditions such as high winds or heavy rain. Take down and repack your projector and screen when not in use. Do not leave outside
for an extended amount of time.
B
A
Bungee cord