User Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
- Features
- Package contents
- Components
- Setting up your projector kit
- Connecting devices
- Positioning your projector
- Using your projector
- Turning your projector on and off
- Selecting the video source
- Adjusting the picture
- Adjusting the contrast
- Adjusting the brightness
- Adjusting the tint
- Adjusting the color temperature
- Selecting the aspect ratio
- Adjusting the noise reduction
- Adjusting the display size
- Selecting the sound mode
- Adjusting the treble or bass
- Adjusting the balance
- Turning the Auto Volume control on or off
- Setting the sleep timer
- Selecting the OSD language
- Restoring factory defaults
- Rotating the picture
- Updating the USB software
- Specifications
- Legal notices
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
13
NS-SCR79KIT
Connecting a Bluetooth speaker (wire connection)
1 Connect the included audio cable to the headphone jack on the back of your projector and to the headphone jack on
the Bluetooth speaker.
2 Press (power) on the speaker to turn on the speaker.
Connecting a VGA device
• Plug the VGA cable (not included) into the VGA jack on your projector and into the VGA jack on your device.
Connecting the power adapter
• Plug the power adapter into the power jack on the side of your projector, then plug the other end into a power outlet
or an extension cord.
Note: You can use the included USB charging cable to charge a Bluetooth speaker.
Power adapter