User Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
- Features
- Package contents
- Components
- Setting up your projector kit
- Connecting devices
- Positioning your projector
- Using your projector
- Turning your projector on and off
- Selecting the video source
- Adjusting the picture
- Adjusting the contrast
- Adjusting the brightness
- Adjusting the tint
- Adjusting the color temperature
- Selecting the aspect ratio
- Adjusting the noise reduction
- Adjusting the display size
- Selecting the sound mode
- Adjusting the treble or bass
- Adjusting the balance
- Turning the Auto Volume control on or off
- Setting the sleep timer
- Selecting the OSD language
- Restoring factory defaults
- Rotating the picture
- Updating the USB software
- Specifications
- Legal notices
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
14
Positioning your projector
You can use your projector both indoors and outdoors (under a cover).
• Place your projector 8 ft. (2.5 m) from the screen and at a height of 4ft. (1.2 m) to use the full screen.
• Turn the keystone wheel on the front of your projector or the adjustment screw on the bottom of your projector to
adjust the projected image angle by ± 15 degrees.
• For best results, use your projector in a dark environment.
Using your projector
Turning your projector on and off
• Press (power) on the remote or on top of your projector to turn your projector on or off.
Selecting the video source
1 Make sure that the video device is connected to your projector.
2 Make sure that both your projector and video device are turned on.
3 Press (source) on the remote or (source) on the top of your projector. The Input Source list opens.
4 Press
or to on the remote or projector to select the video source, then press OK. You can select VGA, HDMI1,
HDMI2, AV, USB1, or USB2.
Note: Your projector is not intended for either ceiling or wall mounting.
Screen
Vertical dimension
Keystone
wheel
Adjustment screw
8 ft. (2.5 m)
4 ft. (1.2 m)