User Manual

www.insigniaproducts.com
16
Adjusting the picture
1 Make sure that both your projector and video device are turned on.
2 Turn the focus wheel on the front of your projector to adjust the focus.
3 Press (menu) on the remote or (menu) on the top of your projector. The PICTURE menu opens.
4 Press
 or  to select Picture Mode, press  or  to select the picture mode, then press OK. You can select Soft, User,
Vivid, or Medium. The option menu that opens varies based on the picture mode you selected.
5 Press
 or  to select an option, then press  or  to adjust the option.
If you selected Soft, Vivid, or Medium, you can’t adjust any options.
If you selected User, you can adjust Contrast, Brightness, Color, and Sharpness.
6 Press
 or  to select a picture mode, then press OK. You can select Soft, User, Vivid, or Medium.
7 Press or to close the menu.
Adjusting the contrast
1 Press (menu) on the remote or (menu) on the top of your projector. The PICTURE menu opens.
2 Press
 or  to select Contrast, then press  or  to adjust the contrast, then press OK.
3 Press or to close the menu.
Adjusting the brightness
1 Press (menu) on the remote or (menu) on the top of your projector. The PICTURE menu opens.
2 Press
 or  to select Brightness, then press  or  to adjust the brightness, then press OK.
3 Press or to close the menu.
Note: To adjust the other picture options, you must set Picture Mode to User. The other picture modes are preset and can’t be
changed.
Note: If a movie or video stops after you adjust the brightness or contrast, plug a mouse (not included) into the USB port, then use the
mouse to press PLAY on the screen. Do not press (play/pause) on the remote.
Reduce Display size 100%
Picture Mode UserP i c t u r e M o d e U s e r
Contrast 50
Brightness 50
Color 50
Sharpness 50
Tint 50
BACK