User Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
- Features
- Package contents
- Components
- Setting up your projector kit
- Connecting devices
- Positioning your projector
- Using your projector
- Turning your projector on and off
- Selecting the video source
- Adjusting the picture
- Adjusting the contrast
- Adjusting the brightness
- Adjusting the tint
- Adjusting the color temperature
- Selecting the aspect ratio
- Adjusting the noise reduction
- Adjusting the display size
- Selecting the sound mode
- Adjusting the treble or bass
- Adjusting the balance
- Turning the Auto Volume control on or off
- Setting the sleep timer
- Selecting the OSD language
- Restoring factory defaults
- Rotating the picture
- Updating the USB software
- Specifications
- Legal notices
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
17
NS-SCR79KIT
Adjusting the tint
1 Press (menu) on the remote or (menu) on the top of your projector. The PICTURE menu opens.
2 Press
or to select Tint, then press or to adjust the tint, then press OK.
3 Press or to close the menu.
Adjusting the color temperature
1 Press (menu) on the remote or (menu) on the top of your projector. The PICTURE menu opens.
2 Make sure that the Picture Mode is set to User. See Adjusting the picture
on page 16.
3 Press
or on the remote or projector to select Color Temperature, then press OK.
4 Press
or to select a color to adjust, press or to adjust the color, then press OK. You can select Red, Green, or
Blue.
5 Press or to close the menu or press
to return to the option list.
Selecting the aspect ratio
1 Press (menu) on the remote or (menu) on the top of your projector. The PICTURE menu opens.
2 Make sure that the Picture Mode is set to User. See Adjusting the picture
on page 16.
3 Press
or to select Aspect Ratio, then press OK.
4 Press
or to select an aspect ratio, then press OK.. You can select Auto, 4:3, or 16:9.
5 Press or to close the menu or press
to return to the option list.
Adjusting the noise reduction
1 Press (menu) on the remote or (menu) on the top of your projector. The PICTURE menu opens.
2 Make sure that the Picture Mode is set to User. See Adjusting the picture
on page 16.
Reduce Display size 100%
Reduce Display size 100%